# Example overclock if proper cooling exists

#over_voltage=5
#arm_freq=2000

gpu_mem=320
hdmi_drive:0=2

# Example setting for hdmi port 0 1366x768
# which most tv monitors will do if your
# monitor is not detected 

#hdmi_force_edid_3d:0=1
#hdmi_mode:0=39
#hdmi_drive:0=2
#hdmi_group:0=2
#hdmi_force_mode:0=1
#hdmi_ignore_edid:0=0xa5000080

# Enable primary console (ttyAMA0) output through GPIO pin 8 and pin 10.
# By default these two pins are repurposed for bluetooth.
#
# Don't mess with this unless you don't want console output
dtoverlay=miniuart-bt

# Enable dwc2 USB host for CM4 and 400
dtoverlay=dwc2,dr_mode=host
