
                                  showseq 



Function

   Displays sequences with features in pretty format

Description

   showseq displays one or more protein or nucleic acid sequences, with
   features, in a style suitable for publication. The output is sent to
   screen by default but can be written to file. You may pick a format
   from a list, alternatively, use the many options to control what is
   output and in what format. Optionally, the sequence feature table can
   be displayed. Where the input sequence is a nucleic acid, the sequence
   can be translated, using the specified genetic code tables. Also
   recognition sites and/or cut sites of restriction enzymes from the
   REBASE database may be displayed. There are various other options for
   controlling how the sequence is displayed and numbered and the output
   can be formatted for HTML.

Usage

   Here is a sample session with showseq


% showseq tembl:x13776 -sbeg 1 -send 100 
Displays sequences with features in pretty format
Things to display
         0 : Enter your own list of things to display
         1 : Sequence only
         2 : Default sequence with features
         3 : Pretty sequence
         4 : One frame translation
         5 : Three frame translations
         6 : Six frame translations
         7 : Restriction enzyme map
         8 : Baroque
Display format [2]: 
Output file [x13776.showseq]: 

   Go to the input files for this example
   Go to the output files for this example

   Example 2

   The standard list of output formats are only a small selection of the
   possible ways in which a sequence might be displayed. Precise control
   over the output format is acheived by selecting the qualifier '-format
   0' (Option 0 in the list of things to display). For example, by
   choosing format '0' and then specifying that we want to display the
   things: 'b,s,t,c', we will output the sequence in the following way:


% showseq tembl:x13776 -sbeg 1 -send 120 
Displays sequences with features in pretty format
Things to display
         0 : Enter your own list of things to display
         1 : Sequence only
         2 : Default sequence with features
         3 : Pretty sequence
         4 : One frame translation
         5 : Three frame translations
         6 : Six frame translations
         7 : Restriction enzyme map
         8 : Baroque
Display format [2]: 0
Specify your own things to display
         S : Sequence
         B : Blank line
         1 : Frame1 translation
         2 : Frame2 translation
         3 : Frame3 translation
        -1 : CompFrame1 translation
        -2 : CompFrame2 translation
        -3 : CompFrame3 translation
         T : Ticks line
         N : Number ticks line
         C : Complement sequence
         F : Features
         R : Restriction enzyme cut sites in forward sense
        -R : Restriction enzyme cut sites in reverse sense
         A : Annotation
Enter a list of things to display [B,N,T,S,A,F]: b,s,t,c
Output file [x13776.showseq]: 

   Go to the output files for this example

   Example 3

   Display only the sequence:


% showseq tembl:x13776 -sbeg 1 -send 100 -noname -nodesc -format 0 -thing S 
Displays sequences with features in pretty format
Output file [x13776.showseq]: 

   Go to the output files for this example

   Example 4

   Protein sequence can be displayed in three-letter codes. (The codes
   are displayed downwards, so the first code is 'Met'):


% showseq tsw:rs24_fugru -three -format 2 
Displays sequences with features in pretty format
Output file [rs24_fugru.showseq]: 

   Go to the input files for this example
   Go to the output files for this example

   Example 5

   Number the sequence lines in the margin:


% showseq tembl:x13776 -sbeg 1 -send 100 -format 1 -number 
Displays sequences with features in pretty format
Output file [x13776.showseq]: 

   Go to the output files for this example

   Example 6

   Start the numbering at a specified value ('123' in this case):


% showseq tembl:x13776 -sbeg 1 -send 100 -format 1 -number -offset 123 
Displays sequences with features in pretty format
Output file [x13776.showseq]: 

   Go to the output files for this example

   Example 7

   Make selected regions uppercase. (Use '-slower' to force the rest of
   the sequence to be lowercase).


% showseq tembl:x13776 -sbeg 1 -send 100 -format 1 -slower -upper '25-45,101-20
3,333-362' 
Displays sequences with features in pretty format
Output file [x13776.showseq]: 

   Go to the output files for this example

   Example 8

   Translate selected regions:


% showseq tembl:x13776 -sbeg 1 -send 120 -format 4 -trans 25-49,66-76 
Displays sequences with features in pretty format
Output file [x13776.showseq]: 

   Go to the output files for this example

   Example 9

   Add your own annotation to the display:


% showseq tembl:x13776 -sbeg 1 -send 100 -format 2 -send 120 -annotation '13-26
 binding site 15-15 SNP' 
Displays sequences with features in pretty format
Output file [x13776.showseq]: 

   Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers (* if not always prompted):
  [-sequence]          seqall     (Gapped) sequence(s) filename and optional
                                  format, or reference (input USA)
   -format             menu       [2] Display format (Values: 0 (Enter your
                                  own list of things to display); 1 (Sequence
                                  only); 2 (Default sequence with features); 3
                                  (Pretty sequence); 4 (One frame
                                  translation); 5 (Three frame translations);
                                  6 (Six frame translations); 7 (Restriction
                                  enzyme map); 8 (Baroque))
*  -things             menu       [B,N,T,S,A,F] Specify a list of one or more
                                  code characters in the order in which you
                                  wish things to be displayed one above the
                                  other down the page. For example if you wish
                                  to see things displayed in the order:
                                  sequence, complement sequence, ticks line,
                                  frame 1 translation, blank line; then you
                                  should enter 'S,C,T,1,B'. (Values: S
                                  (Sequence); B (Blank line); 1 (Frame1
                                  translation); 2 (Frame2 translation); 3
                                  (Frame3 translation); -1 (CompFrame1
                                  translation); -2 (CompFrame2 translation);
                                  -3 (CompFrame3 translation); T (Ticks line);
                                  N (Number ticks line); C (Complement
                                  sequence); F (Features); R (Restriction
                                  enzyme cut sites in forward sense); -R
                                  (Restriction enzyme cut sites in reverse
                                  sense); A (Annotation))
  [-outfile]           outfile    [*.showseq] Output file name

   Additional (Optional) qualifiers:
   -translate          range      [If this is left blank the complete sequence
                                  is translated.] Regions to translate (if
                                  translating).
                                  If this is left blank the complete sequence
                                  is translated.
                                  A set of regions is specified by a set of
                                  pairs of positions.
                                  The positions are integers.
                                  They are separated by any non-digit,
                                  non-alpha character.
                                  Examples of region specifications are:
                                  24-45, 56-78
                                  1:45, 67=99;765..888
                                  1,5,8,10,23,45,57,99
   -uppercase          range      [If this is left blank, then the sequence
                                  case is left alone.] Regions to put in
                                  uppercase.
                                  If this is left blank, then the sequence
                                  case is left alone.
                                  A set of regions is specified by a set of
                                  pairs of positions.
                                  The positions are integers.
                                  They are separated by any non-digit,
                                  non-alpha character.
                                  Examples of region specifications are:
                                  24-45, 56-78
                                  1:45, 67=99;765..888
                                  1,5,8,10,23,45,57,99
   -highlight          range      [(full sequence)] Regions to colour if
                                  formatting for HTML.
                                  If this is left blank, then the sequence is
                                  left alone.
                                  A set of regions is specified by a set of
                                  pairs of positions.
                                  The positions are integers.
                                  They are followed by any valid HTML font
                                  colour.
                                  Examples of region specifications are:
                                  24-45 blue 56-78 orange
                                  1-100 green 120-156 red
                                  A file of ranges to colour (one range per
                                  line) can be specified as '@filename'.
   -annotation         range      [If this is left blank, then no annotation
                                  is added.] Regions to annotate by marking.
                                  If this is left blank, then no annotation is
                                  added.
                                  A set of regions is specified by a set of
                                  pairs of positions followed by optional
                                  text.
                                  The positions are integers.
                                  They are followed by any text (but not
                                  digits when on the command-line).
                                  Examples of region specifications are:
                                  24-45 new domain 56-78 match to Mouse
                                  1-100 First part 120-156 oligo
                                  A file of ranges to annotate (one range per
                                  line) can be specified as '@filename'.
   -enzymes            string     [all] The name 'all' reads in all enzyme
                                  names from the REBASE database. You can
                                  specify enzymes by giving their names with
                                  commas between then, such as:
                                  'HincII,hinfI,ppiI,hindiii'.
                                  The case of the names is not important. You
                                  can specify a file of enzyme names to read
                                  in by giving the name of the file holding
                                  the enzyme names with a '@' character in
                                  front of it, for example, '@enz.list'.
                                  Blank lines and lines starting with a hash
                                  character or '!' are ignored and all other
                                  lines are concatenated together with a comma
                                  character ',' and then treated as the list
                                  of enzymes to search for.
                                  An example of a file of enzyme names is:
                                  ! my enzymes
                                  HincII, ppiII
                                  ! other enzymes
                                  hindiii
                                  HinfI
                                  PpiI (Any string is accepted)
   -table              menu       [0] Genetic code to use (Values: 0
                                  (Standard); 1 (Standard (with alternative
                                  initiation codons)); 2 (Vertebrate
                                  Mitochondrial); 3 (Yeast Mitochondrial); 4
                                  (Mold, Protozoan, Coelenterate Mitochondrial
                                  and Mycoplasma/Spiroplasma); 5
                                  (Invertebrate Mitochondrial); 6 (Ciliate
                                  Macronuclear and Dasycladacean); 9
                                  (Echinoderm Mitochondrial); 10 (Euplotid
                                  Nuclear); 11 (Bacterial); 12 (Alternative
                                  Yeast Nuclear); 13 (Ascidian Mitochondrial);
                                  14 (Flatworm Mitochondrial); 15
                                  (Blepharisma Macronuclear); 16
                                  (Chlorophycean Mitochondrial); 21 (Trematode
                                  Mitochondrial); 22 (Scenedesmus obliquus);
                                  23 (Thraustochytrium Mitochondrial))
   -matchsource        string     [*] By default any feature source in the
                                  feature table is shown. You can set this to
                                  match any feature source you wish to show.
                                  The source name is usually either the name
                                  of the program that detected the feature or
                                  it is the feature table (eg: EMBL) that the
                                  feature came from.
                                  The source may be wildcarded by using '*'.
                                  If you wish to show more than one source,
                                  separate their names with the character '|',
                                  eg:
                                  gene* | embl (Any string is accepted)
   -matchtype          string     [*] By default any feature type in the
                                  feature table is shown. You can set this to
                                  match any feature type you wish to show.
                                  See http://www3.ebi.ac.uk/Services/WebFeat/
                                  for a list of the EMBL feature types and see
                                  Appendix A of the Swissprot user manual in
                                  http://www.expasy.ch/txt/userman.txt for a
                                  list of the Swissprot feature types.
                                  The type may be wildcarded by using '*'.
                                  If you wish to show more than one type,
                                  separate their names with the character '|',
                                  eg:
                                  *UTR | intron (Any string is accepted)
   -matchsense         integer    [0 - any sense, 1 - forward sense, -1 -
                                  reverse sense] By default any feature type
                                  in the feature table is shown. You can set
                                  this to match any feature sense you wish to
                                  show. 0 - any sense, 1 - forward sense, -1 -
                                  reverse sense (Any integer value)
   -minscore           float      [0.0] If this is greater than or equal to
                                  the maximum score, then any score is
                                  permitted (Any numeric value)
   -maxscore           float      [0.0] If this is less than or equal to the
                                  maximum score, then any score is permitted
                                  (Any numeric value)
   -matchtag           string     [*] Tags are the types of extra values that
                                  a feature may have. For example in the EMBL
                                  feature table, a 'CDS' type of feature may
                                  have the tags '/codon', '/codon_start',
                                  '/db_xref', '/EC_number', '/evidence',
                                  '/exception', '/function', '/gene',
                                  '/label', '/map', '/note', '/number',
                                  '/partial', '/product', '/protein_id',
                                  '/pseudo', '/standard_name', '/translation',
                                  '/transl_except', '/transl_table', or
                                  '/usedin'. Some of these tags also have
                                  values, for example '/gene' can have the
                                  value of the gene name.
                                  By default any feature tag in the feature
                                  table is shown. You can set this to match
                                  any feature tag you wish to show.
                                  The tag may be wildcarded by using '*'.
                                  If you wish to show more than one tag,
                                  separate their names with the character '|',
                                  eg:
                                  gene | label (Any string is accepted)
   -matchvalue         string     [*] Tag values are the values associated
                                  with a feature tag. Tags are the types of
                                  extra values that a feature may have. For
                                  example in the EMBL feature table, a 'CDS'
                                  type of feature may have the tags '/codon',
                                  '/codon_start', '/db_xref', '/EC_number',
                                  '/evidence', '/exception', '/function',
                                  '/gene', '/label', '/map', '/note',
                                  '/number', '/partial', '/product',
                                  '/protein_id', '/pseudo', '/standard_name',
                                  '/translation', '/transl_except',
                                  '/transl_table', or '/usedin'. Only some of
                                  these tags can have values, for example
                                  '/gene' can have the value of the gene name.
                                  By default any feature tag value in the
                                  feature table is shown. You can set this to
                                  match any feature tag valueyou wish to show.
                                  The tag value may be wildcarded by using
                                  '*'.
                                  If you wish to show more than one tag value,
                                  separate their names with the character
                                  '|', eg:
                                  pax* | 10 (Any string is accepted)
   -stricttags         boolean    [N] By default if any tag/value pair in a
                                  feature matches the specified tag and value,
                                  then all the tags/value pairs of that
                                  feature will be displayed. If this is set to
                                  be true, then only those tag/value pairs in
                                  a feature that match the specified tag and
                                  value will be displayed.

   Advanced (Unprompted) qualifiers:
   -flatreformat       boolean    [N] This changes the output format to one
                                  where the recognition site is indicated by a
                                  row of '===' characters and the cut site is
                                  pointed to by a '>' character in the
                                  forward sense, or a '<' in the reverse sense
                                  strand.
   -mincuts            integer    [1] This sets the minimum number of cuts for
                                  any restriction enzyme that will be
                                  considered. Any enzymes that cut fewer times
                                  than this will be ignored. (Integer from 1
                                  to 1000)
   -maxcuts            integer    [2000000000] This sets the maximum number of
                                  cuts for any restriction enzyme that will
                                  be considered. Any enzymes that cut more
                                  times than this will be ignored. (Integer up
                                  to 2000000000)
   -sitelen            integer    [4] This sets the minimum length of the
                                  restriction enzyme recognition site. Any
                                  enzymes with sites shorter than this will be
                                  ignored. (Integer from 2 to 20)
   -single             boolean    [N] If this is set then this forces the
                                  values of the mincuts and maxcuts qualifiers
                                  to both be 1. Any other value you may have
                                  set them to will be ignored.
   -[no]blunt          boolean    [Y] This allows those enzymes which cut at
                                  the same position on the forward and reverse
                                  strands to be considered.
   -[no]sticky         boolean    [Y] This allows those enzymes which cut at
                                  different positions on the forward and
                                  reverse strands, leaving an overhang, to be
                                  considered.
   -[no]ambiguity      boolean    [Y] This allows those enzymes which have one
                                  or more 'N' ambiguity codes in their
                                  pattern to be considered
   -plasmid            boolean    [N] If this is set then this allows searches
                                  for restriction enzyme recognition site and
                                  cut postions that span the end of the
                                  sequence to be considered.
   -[no]commercial     boolean    [Y] If this is set, then only those enzymes
                                  with a commercial supplier will be searched
                                  for. This qualifier is ignored if you have
                                  specified an explicit list of enzymes to
                                  search for, rather than searching through
                                  'all' the enzymes in the REBASE database. It
                                  is assumed that, if you are asking for an
                                  explicit enzyme, then you probably know
                                  where to get it from and so all enzymes
                                  names that you have asked to be searched
                                  for, and which cut, will be reported whether
                                  or not they have a commercial supplier.
   -[no]limit          boolean    [Y] This limits the reporting of enzymes to
                                  just one enzyme from each group of
                                  isoschizomers. The enzyme chosen to
                                  represent an isoschizomer group is the
                                  prototype indicated in the data file
                                  'embossre.equ', which is created by the
                                  program 'rebaseextract'. If you prefer
                                  different prototypes to be used, make a copy
                                  of embossre.equ in your home directory and
                                  edit it. If this value is set to be false
                                  then all of the input enzymes will be
                                  reported. You might like to set this to
                                  false if you are supplying an explicit set
                                  of enzymes rather than searching 'all' of
                                  them.
   -orfminsize         integer    [0] This sets the minimum size of Open
                                  Reading Frames (ORFs) to display in the
                                  translations. All other translation regions
                                  are masked by changing the amino acids to
                                  '-' characters. (Integer 0 or more)
   -threeletter        boolean    [N] Display protein sequences in
                                  three-letter code
   -number             boolean    [N] Number the sequences
   -width              integer    [60] Width of sequence to display (Integer 1
                                  or more)
   -length             integer    [0] Line length of page (0 for indefinite)
                                  (Integer 0 or more)
   -margin             integer    [10] Margin around sequence for numbering
                                  (Integer 0 or more)
   -[no]name           boolean    [Y] Set this to be false if you do not wish
                                  to display the ID name of the sequence
   -[no]description    boolean    [Y] Set this to be false if you do not wish
                                  to display the description of the sequence
   -offset             integer    [1] Offset to start numbering the sequence
                                  from (Any integer value)
   -html               boolean    [N] Use HTML formatting

   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -odirectory2        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Input file format

   showseq reads normal sequence USAs.

  Input files for usage example

   'tembl:x13776' is a sequence entry in the example nucleic acid
   database 'tembl'

  Database entry: tembl:x13776

ID   X13776; SV 1; linear; genomic DNA; STD; PRO; 2167 BP.
XX
AC   X13776; M43175;
XX
DT   19-APR-1989 (Rel. 19, Created)
DT   14-NOV-2006 (Rel. 89, Last updated, Version 24)
XX
DE   Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase regulation
XX
KW   aliphatic amidase regulator; amiC gene; amiR gene.
XX
OS   Pseudomonas aeruginosa
OC   Bacteria; Proteobacteria; Gammaproteobacteria; Pseudomonadales;
OC   Pseudomonadaceae; Pseudomonas.
XX
RN   [1]
RP   1167-2167
RA   Rice P.M.;
RT   ;
RL   Submitted (16-DEC-1988) to the EMBL/GenBank/DDBJ databases.
RL   Rice P.M., EMBL, Postfach 10-2209, Meyerhofstrasse 1, 6900 Heidelberg, FRG
.
XX
RN   [2]
RP   1167-2167
RX   DOI; 10.1016/0014-5793(89)80249-2.
RX   PUBMED; 2495988.
RA   Lowe N., Rice P.M., Drew R.E.;
RT   "Nucleotide sequence of the aliphatic amidase regulator gene of Pseudomona
s
RT   aeruginosa";
RL   FEBS Lett. 246(1-2):39-43(1989).
XX
RN   [3]
RP   1-1292
RX   PUBMED; 1907262.
RA   Wilson S., Drew R.;
RT   "Cloning and DNA seqence of amiC, a new gene regulating expression of the
RT   Pseudomonas aeruginosa aliphatic amidase, and purification of the amiC
RT   product.";
RL   J. Bacteriol. 173(16):4914-4921(1991).
XX
RN   [4]
RP   1-2167
RA   Rice P.M.;
RT   ;
RL   Submitted (04-SEP-1991) to the EMBL/GenBank/DDBJ databases.
RL   Rice P.M., EMBL, Postfach 10-2209, Meyerhofstrasse 1, 6900 Heidelberg, FRG
.
XX
DR   GOA; Q51417.
DR   UniProtKB/Swiss-Prot; Q51417; AMIS_PSEAE.
XX


  [Part of this file has been deleted for brevity]

FT                   /replace=""
FT                   /note="ClaI fragment deleted in pSW36,  constitutive
FT                   phenotype"
FT   misc_feature    1
FT                   /note="last base of an XhoI site"
FT   misc_feature    648..653
FT                   /note="end of 658bp XhoI fragment, deletion in  pSW3 cause
s
FT                   constitutive expression of amiE"
FT   conflict        1281
FT                   /replace="g"
FT                   /citation=[3]
XX
SQ   Sequence 2167 BP; 363 A; 712 C; 730 G; 362 T; 0 other;
     ggtaccgctg gccgagcatc tgctcgatca ccaccagccg ggcgacggga actgcacgat        6
0
     ctacctggcg agcctggagc acgagcgggt tcgcttcgta cggcgctgag cgacagtcac       12
0
     aggagaggaa acggatggga tcgcaccagg agcggccgct gatcggcctg ctgttctccg       18
0
     aaaccggcgt caccgccgat atcgagcgct cgcacgcgta tggcgcattg ctcgcggtcg       24
0
     agcaactgaa ccgcgagggc ggcgtcggcg gtcgcccgat cgaaacgctg tcccaggacc       30
0
     ccggcggcga cccggaccgc tatcggctgt gcgccgagga cttcattcgc aaccgggggg       36
0
     tacggttcct cgtgggctgc tacatgtcgc acacgcgcaa ggcggtgatg ccggtggtcg       42
0
     agcgcgccga cgcgctgctc tgctacccga ccccctacga gggcttcgag tattcgccga       48
0
     acatcgtcta cggcggtccg gcgccgaacc agaacagtgc gccgctggcg gcgtacctga       54
0
     ttcgccacta cggcgagcgg gtggtgttca tcggctcgga ctacatctat ccgcgggaaa       60
0
     gcaaccatgt gatgcgccac ctgtatcgcc agcacggcgg cacggtgctc gaggaaatct       66
0
     acattccgct gtatccctcc gacgacgact tgcagcgcgc cgtcgagcgc atctaccagg       72
0
     cgcgcgccga cgtggtcttc tccaccgtgg tgggcaccgg caccgccgag ctgtatcgcg       78
0
     ccatcgcccg tcgctacggc gacggcaggc ggccgccgat cgccagcctg accaccagcg       84
0
     aggcggaggt ggcgaagatg gagagtgacg tggcagaggg gcaggtggtg gtcgcgcctt       90
0
     acttctccag catcgatacg cccgccagcc gggccttcgt ccaggcctgc catggtttct       96
0
     tcccggagaa cgcgaccatc accgcctggg ccgaggcggc ctactggcag accttgttgc      102
0
     tcggccgcgc cgcgcaggcc gcaggcaact ggcgggtgga agacgtgcag cggcacctgt      108
0
     acgacatcga catcgacgcg ccacaggggc cggtccgggt ggagcgccag aacaaccaca      114
0
     gccgcctgtc ttcgcgcatc gcggaaatcg atgcgcgcgg cgtgttccag gtccgctggc      120
0
     agtcgcccga accgattcgc cccgaccctt atgtcgtcgt gcataacctc gacgactggt      126
0
     ccgccagcat gggcggggga ccgctcccat gagcgccaac tcgctgctcg gcagcctgcg      132
0
     cgagttgcag gtgctggtcc tcaacccgcc gggggaggtc agcgacgccc tggtcttgca      138
0
     gctgatccgc atcggttgtt cggtgcgcca gtgctggccg ccgccggaag ccttcgacgt      144
0
     gccggtggac gtggtcttca ccagcatttt ccagaatggc caccacgacg agatcgctgc      150
0
     gctgctcgcc gccgggactc cgcgcactac cctggtggcg ctggtggagt acgaaagccc      156
0
     cgcggtgctc tcgcagatca tcgagctgga gtgccacggc gtgatcaccc agccgctcga      162
0
     tgcccaccgg gtgctgcctg tgctggtatc ggcgcggcgc atcagcgagg aaatggcgaa      168
0
     gctgaagcag aagaccgagc agctccagga ccgcatcgcc ggccaggccc ggatcaacca      174
0
     ggccaaggtg ttgctgatgc agcgccatgg ctgggacgag cgcgaggcgc accagcacct      180
0
     gtcgcgggaa gcgatgaagc ggcgcgagcc gatcctgaag atcgctcagg agttgctggg      186
0
     aaacgagccg tccgcctgag cgatccgggc cgaccagaac aataacaaga ggggtatcgt      192
0
     catcatgctg ggactggttc tgctgtacgt tggcgcggtg ctgtttctca atgccgtctg      198
0
     gttgctgggc aagatcagcg gtcgggaggt ggcggtgatc aacttcctgg tcggcgtgct      204
0
     gagcgcctgc gtcgcgttct acctgatctt ttccgcagca gccgggcagg gctcgctgaa      210
0
     ggccggagcg ctgaccctgc tattcgcttt tacctatctg tgggtggccg ccaaccagtt      216
0
     cctcgag                                                                216
7
//

  Input files for usage example 4

   'tsw:rs24_fugru' is a sequence entry in the example protein database
   'tsw'

  Database entry: tsw:rs24_fugru

ID   RS24_FUGRU              Reviewed;         132 AA.
AC   O42387;
DT   15-JUL-1998, integrated into UniProtKB/Swiss-Prot.
DT   01-JAN-1998, sequence version 1.
DT   20-MAR-2007, entry version 25.
DE   40S ribosomal protein S24.
GN   Name=RPS24;
OS   Fugu rubripes (Japanese pufferfish) (Takifugu rubripes).
OC   Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi;
OC   Actinopterygii; Neopterygii; Teleostei; Euteleostei; Neoteleostei;
OC   Acanthomorpha; Acanthopterygii; Percomorpha; Tetraodontiformes;
OC   Tetradontoidea; Tetraodontidae; Takifugu.
OX   NCBI_TaxID=31033;
RN   [1]
RP   NUCLEOTIDE SEQUENCE [GENOMIC DNA].
RA   Crosio C., Cecconi F., Giorgi M., Amaldi F., Mariottini P.;
RL   Submitted (SEP-1997) to the EMBL/GenBank/DDBJ databases.
CC   -!- SIMILARITY: Belongs to the ribosomal protein S24e family.
CC   -----------------------------------------------------------------------
CC   Copyrighted by the UniProt Consortium, see http://www.uniprot.org/terms
CC   Distributed under the Creative Commons Attribution-NoDerivs License
CC   -----------------------------------------------------------------------
DR   EMBL; AJ001398; CAA04728.1; -; Genomic_DNA.
DR   Ensembl; NEWSINFRUG00000143641; Fugu rubripes.
DR   LinkHub; O42387; -.
DR   InterPro; IPR001976; Ribosomal_S24E.
DR   PANTHER; PTHR10496; Ribosomal_S24E; 1.
DR   Pfam; PF01282; Ribosomal_S24e; 1.
DR   ProDom; PD006052; Ribosomal_S24E; 1.
DR   PROSITE; PS00529; RIBOSOMAL_S24E; 1.
KW   Ribonucleoprotein; Ribosomal protein.
FT   CHAIN         1    132       40S ribosomal protein S24.
FT                                /FTId=PRO_0000137627.
SQ   SEQUENCE   132 AA;  15305 MW;  DC437F60F20C14F5 CRC64;
     MNDTVTVRTR KFMTNRLLQR KQMVVDVLHP GKATVPKTEI REKLAKMYKT TPDVVFVFGF
     RTQFGGGKTT GFAMVYDSLD YAKKNEPKHR LARHGLFEKK KTSRKQRKER KNRMKKVRGT
     KKASVGASKK KD
//

   You can specifiy a file of ranges to display in uppercase by giving
   the '-uppercase' qualifier the value '@' followed by the name of the
   file containing the ranges. (eg: '-upper @myfile').

   The format of the range file is:

     * Comment lines start with '#' in the first column.
     * Comment lines and blank lines are ignored.
     * The line may start with white-space.
     * There are two positive (integer) numbers per line separated by one
       or more space or
     * TAB characters.
     * The second number must be greater or equal to the first number.
     * There can be optional text after the two numbers to annotate the
       line.
     * White-space before or after the text is removed.

   An example range file is:


# this is my set of ranges
12   23
 4   5       this is like 12-23, but smaller
67   10348   interesting region

   You can specifiy a file of ranges to highlight in a different colour
   when outputting in HTML format (using the '-html' qualifier) by giving
   the '-highlight' qualifier the value '@' followed by the name of the
   file containing the ranges. (eg: '-highlight @myfile').

   The format of this file is very similar to the format of the above
   uppercase range file, except that the text after the start and end
   positions is used as the HTML colour name. This colour name is used
   'as is' when specifying the colour in HTML in a '' construct, (where
   'xxx' is the name of the colour).

   The standard names of HTML font colours are given in:
   http://http://www.w3.org/TR/REC-html40/types.html and
   http://www.ausmall.com.au/freegraf/ncolour2.htm and
   http://mindprod.com/htmlcolours.html (amongst other places).

   An example highlight range file is:


# this is my set of ranges
12   23         red
 4   5          darkturquoise
67   10348      #FFE4E1

   You can specifiy a file of ranges to annotate by giving the
   '-annotate' qualifier the value '@' followed by the name of the file
   containing the ranges. (eg: '-annotate @myfile').

   The format of this file is very similar to the format of the above
   highlight range file, except that the text after the start and end
   positions is used as the displayed text of the annotated region.

   An example annotation range file is:

# this is my set of ranges
12   23         exon 1
 4   5          CAP site
67   10348      exon 2

   You can specify a file of enzyme names to read in by giving the
   '-enzymes' qualifier the name of the file holding the enzyme names
   with a '@' character in front of it, for example, '@enz.list'.

   Blank lines and lines starting with a '#' or '!' character are ignored
   and all other lines are concatenated together with a comma character
   ',' and then treated as the list of enzymes to search for.

   An example of a file of enzyme names is:


# my enzymes
HincII, ppiI
# other enzymes
hindiii
HinfI

Output file format

  Output files for usage example

   Note that although we asked for the sequence display to end at
   position '100', it has displayed the sequence up to the end of the
   line - position '120'. This is a feature of this program to make the
   display of things like restriction enzyme cutting sites easier.

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation

                   10        20        30        40        50        60
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat
                 |===============|
                 promoter note="proposed rpoN-dependent promoter"
          |
          misc_feature note="last base of an XhoI site"

                   70        80        90        100
          ----:----|----:----|----:----|----:----|
          ctacctggcgagcctggagcacgagcgggttcgcttcgta
              |===============|
          promoter note="proposed rpoN-dependent promoter"

  Output files for usage example 2

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation

          ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ccatggcgaccggctcgtagacgagctagtggtggtcggcccgctgcccttgacgtgcta

          ctacctggcgagcctggagcacgagcgggttcgcttcgtacggcgctgagcgacagtcac
          ----:----|----:----|----:----|----:----|----:----|----:----|
          gatggaccgctcggacctcgtgctcgcccaagcgaagcatgccgcgactcgctgtcagtg

  Output files for usage example 3

  File: x13776.showseq

          ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat
          ctacctggcgagcctggagcacgagcgggttcgcttcgta

  Output files for usage example 4

  File: rs24_fugru.showseq

RS24_FUGRU
40S ribosomal protein S24.

                   10        20        30        40        50        60
          ----:----|----:----|----:----|----:----|----:----|----:----|
          MAATVTVATALPMTAALLGALGMVVAVLHPGLATVPLTGIAGLLALMTLTTPAVVPVPGP
          esshaharhryhehsreelryleaasaeirlylharyhllrlyelyeyyhhrsaahahlh
          tnprlrlgrgsetrnguungsntllplusoysarlosruegusuastrsrroplleleye
          |===========================================================
          chain ftid="PRO_0000137627" note="40S ribosomal protein S24"

                   70        80        90        100       110       120
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ATGPGGGLTTGPAMVTASLATALLAGPLHALAAHGLPGLLLTSALGALGALAAMLLVAGT
          rhlhlllyhhlhleayseesylyyslryirelrilehlyyyherylrylrysreyyarlh
          grneyyysrryeatlrpruprassnuossguagsyueusssrrgsngsugsngtsslgyr
          ============================================================
          chain ftid="PRO_0000137627" note="40S ribosomal protein S24"

                   130
          ----:----|--
          LLASVGASLLLA
          yylealleyyys
          ssarlyarsssp
          ===========|
          chain ftid="PRO_0000137627" note="40S ribosomal protein S24"

  Output files for usage example 5

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation
        1 ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat 60
       61 ctacctggcgagcctggagcacgagcgggttcgcttcgta 100

  Output files for usage example 6

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation
      123 ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat 182
      183 ctacctggcgagcctggagcacgagcgggttcgcttcgta 222

  Output files for usage example 7

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation
          ggtaccgctggccgagcatctgctCGATCACCACCAGCCGGGCGAcgggaactgcacgat
          ctacctggcgagcctggagcacgagcgggttcgcttcgta

  Output files for usage example 8

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation

                   10        20        30        40        50        60
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat

                                  R  S  P  P  A  G  R  R  V
                 |===============|
                 promoter note="proposed rpoN-dependent promoter"
          |
          misc_feature note="last base of an XhoI site"

                   70        80        90        100       110       120
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ctacctggcgagcctggagcacgagcgggttcgcttcgtacggcgctgagcgacagtcac

                 A  S  L
              |===============|
              promoter note="proposed rpoN-dependent promoter"

  Output files for usage example 9

  File: x13776.showseq

X13776
Pseudomonas aeruginosa amiC and amiR gene for aliphatic amidase
regulation

                   10        20        30        40        50        60
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ggtaccgctggccgagcatctgctcgatcaccaccagccgggcgacgggaactgcacgat
                      |------------|
                      binding site
                        |
                        SNP
                 |===============|
                 promoter note="proposed rpoN-dependent promoter"
          |
          misc_feature note="last base of an XhoI site"

                   70        80        90        100       110       120
          ----:----|----:----|----:----|----:----|----:----|----:----|
          ctacctggcgagcctggagcacgagcgggttcgcttcgtacggcgctgagcgacagtcac
              |===============|
              promoter note="proposed rpoN-dependent promoter"

   Most of the variants of the output format have already been described
   in the 'Description' and 'Usage' sections, but here is some more just
   to fill out this section ;-)

   The output format is extremely variable and under the control of the
   qualifiers used.

   The sequence can be formatted for HTML display by using the '-html'
   qualifier. The top and tail html tags <HEAD>, <BODY> etc. are not
   included as it is expected that the output of this program will be
   included in a more extensive HTML page and so these parts are left to
   the user to provide.

   The name of the sequence is displayed, followed by the description of
   the sequence. These can be turned off with the '-noname' and
   '-nodescription' qualifiers.

   Then the sequence is output, one line at a time. Any associated
   information to be displayed is also output above and below the
   sequence line, as specified by the '-format' and or '-things'
   qualifiers. (See the 'Description' section for detals).

   The margins around the sequence are specified by the use of the
   '-margin' qaulifier and any numbering of the sequence and its
   translations are placed in the margin.

   A display of the restriction enzyme cut sites can be selected via
   '-format 6' option or the '-format 0 -thing b,r,s,-r' style of
   options.

   The option '-format 7' will produce a formatted display of cut sites
   on the sequence, with the six-frame translation below it. The cut
   sites are indicated by a slash character '\' that points to the
   poition between the nucleotides where the cuts occur. Cuts by many
   enzymes at the same position are indicated by stacking the enzyme
   names on top of each other.

   At the end the section header 'Enzymes that cut' is displayed followed
   by a list of the enzymes that cut the specified sequence and the
   number of times that they cut.

   The '-flatreformat' qualifier changes the display to emphasise the
   recognition site of the restriction enzyme, which is indicated by a
   row of '=' characters. The cut site if pointed to by a '>' or '<'
   character and if the cut site is not within or imemdiately adjacent to
   the recognition site, they are linked by a row or '.' characters.

   The name of the enzyme is displayed above (or below when the reverse
   sense site if displayed) the recognition site. The name of the enzyme
   is also displayed above the cut site if this occurs on a different
   display line to the recognition site (i.e. if it wraps onto the next
   line of sequence).

Data files

   EMBOSS data files are distributed with the application and stored in
   the standard EMBOSS data directory, which is defined by the EMBOSS
   environment variable EMBOSS_DATA.

   To see the available EMBOSS data files, run:

% embossdata -showall

   To fetch one of the data files (for example 'Exxx.dat') into your
   current directory for you to inspect or modify, run:

% embossdata -fetch -file Exxx.dat

   Users can provide their own data files in their own directories.
   Project specific files can be put in the current directory, or for
   tidier directory listings in a subdirectory called ".embossdata".
   Files for all EMBOSS runs can be put in the user's home directory, or
   again in a subdirectory called ".embossdata".

   The directories are searched in the following order:
     * . (your current directory)
     * .embossdata (under your current directory)
     * ~/ (your home directory)
     * ~/.embossdata

   The Genetic Code data files are based on the NCBI genetic code tables.
   Their names and descriptions are:

   EGC.0
          Standard (Differs from GC.1 in that it only has initiation site
          'AUG')

   EGC.1
          Standard

   EGC.2
          Vertebrate Mitochodrial

   EGC.3
          Yeast Mitochondrial

   EGC.4
          Mold, Protozoan, Coelenterate Mitochondrial and
          Mycoplasma/Spiroplasma

   EGC.5
          Invertebrate Mitochondrial

   EGC.6
          Ciliate Macronuclear and Dasycladacean

   EGC.9
          Echinoderm Mitochondrial

   EGC.10
          Euplotid Nuclear

   EGC.11
          Bacterial

   EGC.12
          Alternative Yeast Nuclear

   EGC.13
          Ascidian Mitochondrial

   EGC.14
          Flatworm Mitochondrial

   EGC.15
          Blepharisma Macronuclear

   EGC.16
          Chlorophycean Mitochondrial

   EGC.21
          Trematode Mitochondrial

   EGC.22
          Scenedesmus obliquus

   EGC.23
          Thraustochytrium Mitochondrial

   The format of these files is very simple.

   It consists of several lines of optional comments, each starting with
   a '#' character.

   These are followed the line: 'Genetic Code [n]', where 'n' is the
   number of the genetic code file.

   This is followed by the description of the code and then by four lines
   giving the IUPAC one-letter code of the translated amino acid, the
   start codons (indicdated by an 'M') and the three bases of the codon,
   lined up one on top of the other.

   For example:

------------------------------------------------------------------------------
# Genetic Code Table
#
# Obtained from: http://www.ncbi.nlm.nih.gov/collab/FT/genetic_codes.html
# and: http://www3.ncbi.nlm.nih.gov/htbin-post/Taxonomy/wprintgc?mode=c
#
# Differs from Genetic Code [1] only in that the initiation sites have been
# changed to only 'AUG'

Genetic Code [0]
Standard

AAs  =   FFLLSSSSYY**CC*WLLLLPPPPHHQQRRRRIIIMTTTTNNKKSSRRVVVVAAAADDEEGGGG
Starts = -----------------------------------M----------------------------
Base1  = TTTTTTTTTTTTTTTTCCCCCCCCCCCCCCCCAAAAAAAAAAAAAAAAGGGGGGGGGGGGGGGG
Base2  = TTTTCCCCAAAAGGGGTTTTCCCCAAAAGGGGTTTTCCCCAAAAGGGGTTTTCCCCAAAAGGGG
Base3  = TCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAGTCAG
------------------------------------------------------------------------------

   The EMBOSS REBASE restriction enzyme data files are stored in
   directory 'data/REBASE/*' under the EMBOSS installation directory.

   These files must first be set up using the program 'rebaseextract'.
   Running 'rebaseextract' may be the job of your system manager.

   The data files are stored in the REBASE directory of the standard
   EMBOSS data directory. The names are:
     * embossre.enz Cleavage information
     * embossre.ref Reference/methylation information
     * embossre.sup Supplier information

   The column information is described at the top of the data files

   The reported enzyme from any one group of isoschizomers (the
   prototype) is specified in the REBASE database and the information is
   held in the data file 'embossre.equ'. You may edit this file to set
   your own preferred prototype, if you wish.

   The format of the file "embossre.equ" is
   Enzyme-name Prototype-name

   i.e. two columns of enzyme names separated by a space. The first name
   of the pair of enzymes is the name that is not preferred and the
   second is the preferred (prototype) name.

Notes

   One or more things may be selected for display from a menu (-things
   option). The order of specified characters (upper or lower case)
   determines the order in the output:
s       Sequence
b       Blank line
1       Frame 1 translation
2       Frame 2 translation
3       Frame 3 translation
-1      Frame -1 translation
-2      Frame -2 translation
-2      Frame -3 translation
t       Ticks line
n       Number ticks line
c       Complement sequence
f       Features (from the feature table or from a command line -ufo file)
r       Restriction enzyme cut sites in the forward sense
-r      Restriction enzyme cut sites in the reverse sense
a       User Annotation

   Alternatively, there is a selection of pre-defined formats to choose
   from. The codes from above used in the list of standard formats are:
Sequence only:                  S A
Default sequence:               B N T S A F
Pretty sequence:                B N T S A
One frame translation:          B N T S B 1 A F
Three frame translations:       B N T S B 1 2 3 A F
Six frame translations:         B N T S B 1 2 3 T -3 -2 -1 A F
Restriction enzyme map:         B R S N T C -R B 1 2 3 T -3 -2 -1 A
Baroque:                        B 1 2 3 N T R S T C -R T -3 -2 -1 A F

   The default standard format displays the following: for every new line
   that the sequence starts to write, the output display will contain
   first a blank line (b), then the position numbers of the ticks (n)
   then the ticks every 10 characters (t) then the sequence itself (s)
   then any user-supplied annotation (a) then the features from the
   feature table (f). Subsequent lines of the sequence output will repeat
   this format.

   The sequence can be translated, using the specified genetic code
   tables. The translation can be done in one, three or six frames. The
   translation can be displayed in one-letter or three-letter amino acid
   codes. The translation can optionally be displayed only when it is in
   open reading frames (ORFs) of a specified minimum size. One or more
   specified regions of the sequence can be individually translated.

   The output can be formatted for HTML. If the output is being formatted
   for HTML, then specified regions of the sequence can be displayed in
   any valid HTML colours.

   This program can use REBASE data to find the recognition sites and/or
   cut sites of restriction enzymes in a nucleic acid sequence. This
   program can display the cut sites on both strands. The -flatreformat
   option displays not only the cut sites which many other restriction
   cut-site programs will show, but also shows the recognition site.

   The Restriction Enzyme database (REBASE) is a collection of
   information about restriction enzymes and related proteins. It
   contains published and unpublished references, recognition and
   cleavage sites, isoschizomers, commercial availability, methylation
   sensitivity, crystal and sequence data. DNA methyltransferases, homing
   endonucleases, nicking enzymes, specificity subunits and control
   proteins are also included. Most recently, putative DNA
   methyltransferases and restriction enzymes, as predicted from analysis
   of genomic sequences, are also listed. The home page of REBASE is:
   http://rebase.neb.com/

   If the sequence is in EMBL, Genbank or SwissProt format, the feature
   table of the sequence can be dispalyed with the sequence. GFF file
   features can also be displayed if they are included on the command
   line using -ufo=file.

   Other display options include: The displayed sequence can be numbered
   either by numbering the start and ending positions, or by placing a
   ruler with ticks above or below the sequence. An initial position to
   start the numbering from can be set. The width of a line, and width of
   a margin around the sequence reserved for numbering can be set.
   Specified regions of the sequence can be displayed in uppercase to
   highlight them.

References

   None.

Warnings

   None.

Diagnostic Error Messages

   None.

Exit status

   It always exits with status 0.

Known bugs

   None known.

   If you ask for the sequence display to end at position '100', with the
   qualifier '-send 100', it will display the sequence up to the end of
   the line - position '120'. This is a feature of this program to make
   the display of things like restriction enzyme cutting sites easier.

   It is not a bug. Please don't report it.

See also

   Program name Description
   abiview Display the trace in an ABI sequencer file
   backtranambig Back-translate a protein sequence to ambiguous
   nucleotide sequence
   backtranseq Back-translate a protein sequence to a nucleotide sequence
   cirdna Draws circular maps of DNA constructs
   coderet Extract CDS, mRNA and translations from feature tables
   lindna Draws linear maps of DNA constructs
   pepnet Draw a helical net for a protein sequence
   pepwheel Draw a helical wheel diagram for a protein sequence
   plotorf Plot potential open reading frames in a nucleotide sequence
   prettyplot Draw a sequence alignment with pretty formatting
   prettyseq Write a nucleotide sequence and its translation to file
   recoder Find restriction sites to remove (mutate) with no translation
   change
   redata Retrieve information from REBASE restriction enzyme database
   remap Display restriction enzyme binding sites in a nucleotide
   sequence
   restover Find restriction enzymes producing a specific overhang
   restrict Report restriction enzyme cleavage sites in a nucleotide
   sequence
   seealso Finds programs with similar function to a specified program
   showalign Display a multiple sequence alignment in pretty format
   showdb Displays information on configured databases
   showfeat Display features of a sequence in pretty format
   showorf Display a nucleotide sequence and translation in pretty format
   silent Find restriction sites to insert (mutate) with no translation
   change
   sixpack Display a DNA sequence with 6-frame translation and ORFs
   textsearch Search the textual description of sequence(s)
   transeq Translate nucleic acid sequences

Author(s)

   Gary Williams (gwilliam  rfcgr.mrc.ac.uk)
   MRC Rosalind Franklin Centre for Genomics Research Wellcome Trust
   Genome Campus, Hinxton, Cambridge, CB10 1SB, UK

History

   Written 1999 - GWW
   23 Aug 2000 - features display added - GWW
   20 Nov 2001 - feature matches and annotation display added - GWW

Target users

   This program is intended to be used by everyone and everything, from
   naive users to embedded scripts.

Comments

   None
