# xschemrc system configuration file
# values may be overridden by user's ~/.xschem/xschemrc configuration file
# or by project-local ./xschemrc

## clear tcl prompts
# set tcl_prompt1 {}
# set tcl_prompt2 {}


###########################################################################
# xschem installation directory XSCHEM_SHAREDIR
###########################################################################

# normally there is no reason to set this variable if using standard
# installation. Location of files is set at compile time but may be overridden
# with following line:
#
# set XSCHEM_SHAREDIR $env(HOME)/share/xschem

###########################################################################
# xschem system-wide design library paths XSCHEM_LIBRARY_PATH
###########################################################################

# If unset xschem starts with the default set compile time, typically:
# set XSCHEM_LIBRARY_PATH .:~/.xschem/xschem_library:${XSCHEM_SHAREDIR}/xschem_library/devices

# For testing in build src directory
#
# set XSCHEM_LIBRARY_PATH .:../xschem_library/devices

# for testing after installation:
#
# set XSCHEM_LIBRARY_PATH .:~/.xschem/xschem_library
# append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/examples
# append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/pcb
# append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/xschem_library/devices


###########################################################################
# Window to open on startup XSCHEM_START_WINDOW
###########################################################################

# Start without a design:
#
# set XSCHEM_START_WINDOW {}

# Start with a design
# To avoid absolute paths, use a path that is relative to one of the
# XSCHEM_LIBRARY_PATH directories.
#
# set XSCHEM_START_WINDOW {0_examples_top}


###########################################################################
# Directory where simulations, netlist and simulator outputs are placed
###########################################################################
# If unset xschem asks user to choose one when doing a netlist
#
# set netlist_dir $env(HOME)/xschem_library/simulations

###########################################################################
# some default behavior
###########################################################################

set netlist_type spice ;# allowed : spice, verilog, vhdl, tedax
set hspice_netlist 1
set verilog_2001 1
# set line_width 2
set change_lw 1
set color_ps 1
set initial_geometry {800x600}
# set unzoom_nodrift 0

## if set to 1 allow to place multiple components with same name.
## Warning: this is normally not allowed in any simulation netlist.
set disable_unique_names 0

## set to 1 to present a dialog with list of defined library directories
## to select symbols / schematics from
set use_list_dirs 0

###########################################################################
# custom grid / snap value settings
###########################################################################

# set grid 100
# set snap 50

###########################################################################
# Custom colors  may be defined here
###########################################################################

#  set cadlayers 22
#  set light_colors {
#   "#ffffff" "#0044ee" "#aaaaaa" "#222222" "#229900"
#   "#bb2200" "#00ccee" "#ff0000" "#888800" "#00aaaa"
#   "#880088" "#00ff00" "#0000cc" "#666600" "#557755"
#   "#aa2222" "#7ccc40" "#00ffcc" "#ce0097" "#d2d46b"
#   "#ef6158" "#fdb200" }

#  set dark_colors {
#   "#000000" "#00ccee" "#3f3f3f" "#cccccc" "#88dd00"
#   "#bb2200" "#00ccee" "#ff0000" "#ffff00" "#ffffff"
#   "#ff00ff" "#00ff00" "#0000cc" "#aaaa00" "#aaccaa"
#   "#ff7777" "#bfff81" "#00ffcc" "#ce0097" "#d2d46b"
#   "#ef6158" "#fdb200" }

###########################################################################
# CAIRO STUFF
###########################################################################

#### Scale all fonts by this number
# set cairo_font_scale 1.0

#### Scale line spacing by this number
# set cairo_font_line_spacing 1.0

#### Specify a font
set cairo_font_name {Arial}

#### Lift up text by some zoom-corrected pixels for
#### better compatibility wrt no cairo version.
#### Useful values in the range [-1, 3]
set cairo_vert_correct 1

###########################################################################
# KEYBINDINGS
###########################################################################

#### General format for specifying a replacement for a keybind
#### Replace Ctrl-d with Escape (so you wont kill the program)
# set replace_key(Control-d) Escape

#### swap w and W keybinds; Always specify Shift for capital letters
# set replace_key(Shift-W) w
# set replace_key(w) Shift-W

set terminal {xterm -geometry 100x35 -fn 9x15 -bg black -fg white -cr white -ms white }
## lxterminal is not OK since it will not inherit env vars: 
## In order to reduce memory usage and increase the performance, all instances
## of the terminal are sharing a single process. LXTerminal is part of LXDE

# editor must not detach from launching shell (-f mandatory for gvim)
set editor {gvim -f -geometry 90x28}

###########################################################################
# alternatives: ngspice hspice, hspicerf, finesim
###########################################################################
set spice_simulator ngspice
set finesim_opts {}
set ngspice_opts {}
#### alternatives: iverilog, modelsim
set verilog_simulator iverilog

#### alternatives: ghdl, modelsim
set vhdl_simulator ghdl

#### command to translate xpm to png (assumes command takes source 
#### and dest file as arguments, example: gm convert plot.xpm plot.png)
set to_png {gm convert}

#### computer farm redirector
#### RTDA NC
# set computerfarm {nc run -Il}
#### LSF BSUB
# set computerfarm {bsub -Is}

#### icarus verilog (open source verilog simulator)
# set iverilog_path $env(HOME)/verilog/bin/iverilog
# set vvp_path $env(HOME)/verilog/bin/vvp
set iverilog_opts {-g2012}

#### default analog wiewer (waveview) 
# set analog_viewer waveview

#### waveview
# set waveview_path $env(HOME)/waveview/bin/wv
# set waveview_path $env(HOME)/waveview_2013/bin/wv

#### utile (stefan's spice stimuli editor)
set utile_gui_path ${XSCHEM_SHAREDIR}/utile/utile3
set utile_cmd_path ${XSCHEM_SHAREDIR}/utile/utile

#### gtkwave (open source digital wave viewer)
# set gtkwave_path $env(HOME)/gtkwave/bin/gtkwave

#### modelsim
# set modelsim_path $env(HOME)/modelsim/modeltech/bin

#### ghdl (open source vhdl simulator)
# set ghdl_path $env(HOME)/ghdl/bin/ghdl
set ghdl_elaborate_opts {--ieee=synopsys -fexplicit}
set ghdl_run_opts {}

#### ngspice (open source spice simulator)
# set ngspice_path $env(HOME)/ngspice/bin/ngspice

#### hspice  and modelsim license files (sample syntax)
# set env(LM_LICENSE_FILE) $env(HOME)/modelsim/license.dat:$env(HOME)/hspice_2008/license.dat:$env(HOME)/hspice_2013/lic.dat

# set hspice_path "$env(HOME)/hspice_2013/bin/hspice64 -mt 8"
# set hspicerf_path $env(HOME)/hspice_2013/bin/hspicerf64

# lappend tcl_files ${XSCHEM_SHAREDIR}/change_index.tcl
# lappend tcl_files ${XSCHEM_SHAREDIR}/hspice_backannotate.tcl

