--- pine/osdep/os-bso.h	Wed Dec 31 16:00:00 1969
+++ pine/osdep/os-bso.h	Sat Aug  1 22:02:35 1998
@@ -0,0 +1,289 @@
+/*----------------------------------------------------------------------
+  $Id: patch-ai,v 1.2 1998/08/03 04:12:01 marc Exp $
+
+            T H E    P I N E    M A I L   S Y S T E M
+
+   Laurence Lundblade and Mike Seibel
+   Networks and Distributed Computing
+   Computing and Communications
+   University of Washington
+   Administration Builiding, AG-44
+   Seattle, Washington, 98195, USA
+   Internet: lgl@CAC.Washington.EDU
+             mikes@CAC.Washington.EDU
+
+   Please address all bugs and comments to "pine-bugs@cac.washington.edu"
+
+
+   Pine and Pico are registered trademarks of the University of Washington.
+   No commercial use of these trademarks may be made without prior written
+   permission of the University of Washington.
+
+   Pine, Pico, and Pilot software and its included text are Copyright
+   1989-1998 by the University of Washington.
+
+   The full text of our legal notices is contained in the file called
+   CPYRIGHT, included with this distribution.
+
+
+   Pine is in part based on The Elm Mail System:
+    ***********************************************************************
+    *  The Elm Mail System  -  Revision: 2.13                             *
+    *                                                                     *
+    * 			Copyright (c) 1986, 1987 Dave Taylor              *
+    * 			Copyright (c) 1988, 1989 USENET Community Trust   *
+    ***********************************************************************
+ 
+
+  ----------------------------------------------------------------------*/
+
+#ifndef _OS_INCLUDED
+#define _OS_INCLUDED
+
+#include "../c-client/osdep.h"
+
+
+/*----------------------------------------------------------------------
+
+   This first section has some constants that you may want to change
+   for your configuration.  This is the OpenBSD version of the os.h file.
+   Further down in the file are os-dependent things that need to be set up
+   correctly for each os.  They aren't interesting, they just have to be
+   right.  There are also a few constants down there that may be of
+   interest to some.
+
+ ----*/
+
+/*----------------------------------------------------------------------
+   Define this if you want the disk quota to be checked on startup.
+   Of course, this only makes sense if your system has quotas.  If it doesn't,
+   there should be a dummy disk_quota() routine in os-xxx.c so that defining
+   this won't be harmful anyway.
+ ----*/
+#define USE_QUOTAS  /* comment out if you never want quotas checked */
+
+
+
+/*----------------------------------------------------------------------
+   Define this if you want to be sure to not allow users to change their
+   From header line when they send out mail. Even if you don't define
+   this the default is to not allow From to be changed. The user would have
+   to edit (by hand) "allow-changing-from" into their .pinerc feature list
+   or the sys-admin would have to include it in the default feature-list.
+   Even after that, the user still has to include it in either their
+   default-composer-hdrs or customized-hdrs to get at it. Instead of
+   defining NEVER_ALLOW_CHANGING_FROM, an easier way of preventing From
+   changing is to put the feature "no-allow-changing-from" in the
+   /usr/local/lib/pine.conf.fixed file.
+ ----*/
+/* #define NEVER_ALLOW_CHANGING_FROM /* probably not needed */
+
+
+
+/*----------------------------------------------------------------------
+   Define this if you want to allow users to turn on the feature that
+   enables sending to take place in a fork()'d child.  This may reduce
+   the time on the user's wall clock it takes to post mail.
+   NOTE: You'll also have to make sure the appropriate osdep/postreap.*
+         file is included in the os-*.ic file for your system.
+ ----*/
+/* #define BACKGROUND_POST  /* comment out to disable posting from child */
+
+
+
+/*----------------------------------------------------------------------
+    Turn this on if you want to disable the keyboard lock function.
+ ----*/
+/* #define NO_KEYBOARD_LOCK */
+
+
+
+/*----------------------------------------------------------------------
+    Turn this on to trigger QP encoding of sent message text if it contains
+  "From " at the beginning of a line or "." on a line by itself.
+ ----*/
+/* #define ENCODE_FROMS */
+
+
+
+/*----------------------------------------------------------------------
+    Timeouts (seconds)
+ ----*/
+#define DF_MAILCHECK      "150" /* How often to check for new mail, by
+				   default.  There's some expense in doing
+				   this so it shouldn't be done too
+				   frequently.  (Can be set in config
+				   file now.)  */
+
+/*----------------------------------------------------------------------
+    Check pointing (seconds)
+ ----*/
+#define CHECK_POINT_TIME (7*60) /* Check point the mail file (write changes
+				   to disk) if more than CHECK_POINT_TIME
+				   seconds have passed since the first
+				   change was made.  Depending on what is
+				   happening, we may wait up to three times
+				   this long, since we don't want to do the
+				   slow check pointing and irritate the user. */
+                                     
+#define CHECK_POINT_FREQ   (12) /* Check point the mail file if there have been
+                                   at least this many (status) changes to the
+				   current mail file.  We may wait longer if
+				   it isn't a good time to do the checkpoint. */
+
+
+
+/*----------------------------------------------------------------------
+ In scrolling through text, the number of lines from the previous
+ screen to overlap when showing the next screen.  Usually set to two.
+ ----*/
+#define	DF_OVERLAP	"2"
+
+
+
+/*----------------------------------------------------------------------
+ When scrolling screens, the number of lines from top and bottom of
+ the screen to initiate single-line scrolling.
+ ----*/
+#define	DF_MARGIN	"0"
+
+
+
+/*----------------------------------------------------------------------
+ Default fill column for pine composer and maximum fill column.  The max
+ is used to stop people from setting their custom fill column higher than
+ that number.  Note that DF_FILLCOL is a string but MAX_FILLCOL is an integer.
+ ----*/
+#define	DF_FILLCOL	"74"
+#define	MAX_FILLCOL	80
+
+
+
+/*----- System-wide config file ----------------------------------------*/
+#define SYSTEM_PINERC             "/etc/pine.conf"
+#define SYSTEM_PINERC_FIXED       "/etc/pine.conf.fixed"
+
+
+
+/*----------------------------------------------------------------------
+   The default folder names and folder directories (some for backwards
+   compatibility).  Think hard before changing any of these.
+ ----*/
+#define DF_DEFAULT_FCC            "sent-mail"
+#define DEFAULT_SAVE              "saved-messages"
+#define POSTPONED_MAIL            "postponed-mail"
+#define POSTPONED_MSGS            "postponed-msgs"
+#define INTERRUPTED_MAIL          ".pine-interrupted-mail"
+#define DEADLETTER                "dead.letter"
+#define DF_MAIL_DIRECTORY         "mail"
+#define INBOX_NAME                "INBOX"
+#define DF_SIGNATURE_FILE         ".signature"
+#define DF_ELM_STYLE_SAVE         "no"
+#define DF_HEADER_IN_REPLY        "no"
+#define DF_OLD_STYLE_REPLY        "no"
+#define DF_USE_ONLY_DOMAIN_NAME   "no"
+#define DF_FEATURE_LEVEL          "sapling"
+#define DF_SAVE_BY_SENDER         "no"
+#define DF_SORT_KEY               "arrival"
+#define DF_AB_SORT_RULE           "fullname-with-lists-last"
+#define DF_FLD_SORT_RULE          "alphabetical"
+#define DF_SAVED_MSG_NAME_RULE    "default-folder"
+#define DF_FCC_RULE               "default-fcc"
+#define DF_STANDARD_PRINTER       "lpr"
+#define ANSI_PRINTER              "attached-to-ansi"
+#define DF_ADDRESSBOOK            ".addressbook"
+#define DF_BUGS_FULLNAME          "Pine Developers"
+#define DF_BUGS_ADDRESS           "pine-bugs@cac.washington.edu"
+#define DF_SUGGEST_FULLNAME       "Pine Developers"
+#define DF_SUGGEST_ADDRESS        "pine-suggestions@cac.washington.edu"
+#define DF_PINEINFO_FULLNAME      "Pine-Info News Group"
+#define DF_PINEINFO_ADDRESS       "pine-info@cac.washington.edu"
+#define DF_LOCAL_FULLNAME         "Local Support"
+#define DF_LOCAL_ADDRESS          "postmaster"
+#define DF_KBLOCK_PASSWD_COUNT    "1"
+#define DF_REMOTE_ABOOK_HISTORY   "3"
+
+/*----------------------------------------------------------------------
+   The default printer when pine starts up for the first time with no printer
+ ----*/
+#define DF_DEFAULT_PRINTER        ANSI_PRINTER
+
+
+
+/*----- The usual sendmail configuration for sending mail on Unix ------*/
+#define SENDMAIL	"/usr/sbin/sendmail"
+#define SENDMAILFLAGS	"-bs -odb -oem"	/* send via smtp with backgroud
+					   delivery and mail back errors */
+
+
+/*----------------------------------------------------------------------
+   If no nntp-servers are defined, this program will be used to post news.
+ ----*/
+#define SENDNEWS	"/usr/local/news/inews -h"	/* news posting cmd */
+
+
+/*--------- Program employed by users to change their password ---------*/
+#define	PASSWD_PROG	"/usr/bin/passwd"
+
+
+/*-------------- A couple constants used to size arrays ----------------*/
+#include <sys/param.h>          /* Get it from param.h if available */
+#undef MAXPATH                  /* Sometimes defined in param.h differently */
+#define MAXPATH MAXPATHLEN      /* Longest pathname we ever expect */
+/* #define MAXPATH        (512)    /* Longest pathname we ever expect */
+#define MAXFOLDER      (64)     /* Longest foldername we ever expect */  
+
+
+/*-- Max screen pine will display on. Used to define some array sizes --*/
+#define MAX_SCREEN_COLS  (170) 
+#define MAX_SCREEN_ROWS  (200) 
+
+
+/*----------------------------------------------------------------------
+    Where to put the output of pine in debug mode. Files are created
+ in the user's home directory and have a number appended to them when
+ there is more than one.
+ ----*/
+#define DEBUGFILE	".pine-debug"
+
+/*----------------------------------------------------------------------
+    The number of debug files to save in the user's home diretory. The files
+ are useful for figuring out what a user did when he complains that something
+ went wrong. It's important to keep a bunch around, usually 4, so that the
+ debug file in question will still be around when the problem gets 
+ investigated. Users tend to go in and out of Pine a few times and there
+ is one file for each pine invocation
+ ----*/
+#define NUMDEBUGFILES 4
+
+/*----------------------------------------------------------------------
+   The default debug level to set (approximate meanings):
+       1 logs only highest level events and errors
+       2 logs events like file writes
+       3
+       4 logs each command
+       5
+       6 
+       7 logs details of command execution (7 is highest to run any production)
+       8
+       9 logs gross details of command execution
+ ----*/
+#define DEFAULT_DEBUG 2
+
+
+
+/*----------------------------------------------------------------------
+    Various maximum field lengths, probably shouldn't be changed.
+ ----*/
+#define MAX_FULLNAME     (100) 
+#define MAX_NICKNAME      (40)
+#define MAX_ADDRESS      (500)
+#define MAX_NEW_LIST     (500)  /* Max addrs to be added when creating list */
+#define MAX_SEARCH       (100)  /* Longest string to search for             */
+#define MAX_ADDR_EXPN   (1000)  /* Longest expanded addr                    */
+#define MAX_ADDR_FIELD (10000)  /* Longest fully-expanded addr field        */
+
+
+#endif /* _OS_INCLUDED */
+
+
