Packages changed: cups === Details === ==== cups ==== Subpackages: cups-config libcups2 - Provide /usr/share/cups/ppdc/ in the "cups" main package to avoid that "lpinfo -m" results in /var/log/cups/error_log things like "ppdc: Unable to find include file font.defs" or "ppdc: Unable to find include file hp.h" and then "Bad driver information file /usr/share/cups/drv/sample.drv" (bsc#1186843) - When cupsd creates directories with specific owner group and permissions (usually owner is 'root' and group matches "configure --with-cups-group=lp") specify same owner group and permissions in the RPM spec file to ensure those directories are installed by RPM with the right settings because if those directories were installed by RPM with different settings then cupsd would use them as is and not adjust its specific owner group and permissions which could lead to privilege escalation from 'lp' user to 'root' via symlink attacks e.g. if owner is falsely 'lp' instead of 'root' CVE-2021-25317 (bsc#1184161) - upstream_pull_174.patch is https://github.com/OpenPrinting/cups/pull/174 "Use 60s timeout for read_thread, revert read limits" to fix printing with older USB printers - New upstream URL https://openprinting.github.io/cups - Disable testsuite for now via "bcond_with testsuite" until https://github.com/OpenPrinting/cups/issues/155 is fixed - Add "testsuite" conditional that disables anything within %check - fix-negotiate-authentication-between-CGIs-and-scheduler.patch fixes web UI Kerberos authentication (bsc#1175960) - Upstream changed to https://github.com/OpenPrinting/cups - Added %check section to specfile that executes the old 'make check' and the new (see 2.3.3op1) 'make test' - Version upgrade to 2.3.3op2: * Security: Fixed a buffer (read) overflow in the ippReadIO function (CVE-2020-10001) * Clarified the documentation for the "Listen" directive * Fixed duplicate ColorModel entries for AirPrint printers * Fixed directory/permission defaults for Debian kfreebsd-based systems * Fixed crash bug in ppdOpen * Fixed regression in snprintf emulation function * The scheduler's systemd service file now waits for the nslcd service to start * The libusb-based USB backend now uses a simpler read timer implementation to avoid a regression in a previous change * The PPD caching code now only tracks the APPrinterIconPath value on macOS * Fixed segfault in help.cgi when searching in man pages * Root certificates were incorrectly stored in "~/.cups/ssl". * Version upgrade to 2.3.3op1: * The automated test suite can now be activated using make test for consistency with other projects and CI environments - the old make check continues to work as well, and the previous test server behavior can be accessed by running make testserver. * ippeveprinter now supports multiple icons and strings files. * ippeveprinter now uses the system's FQDN with Avahi. * ippeveprinter now supports Get-Printer-Attributes on "/". * ippeveprinter now uses a deterministic "printer-uuid" value. * ippeveprinter now uses system sounds on macOS for Identify-Printer. * Updated ippfind to look for files in "~/Desktop" on Windows. * Updated ippfind to honor SKIP-XXX directives with PAUSE. * Updated IPP Everywhere support to work around printers that only advertise color raster support but really also support grayscale * ipptool now supports DNS-SD URIs like ipps://My%20Printer._ipps._tcp.local * The scheduler now allows root backends to have world read permissions but not world execute permissions * Failures to bind IPv6 listener sockets no longer cause errors if IPv6 is disabled on the host * The SNMP backend now supports the HP and Ricoh vendor MIBs * The scheduler no longer includes a timestamp in files it writes * The systemd service names are now "cups.service" and "cups-lpd.service" * The scheduler no longer adds the local hostname to the ServerAlias list * Added LogFileGroup directive in "cups-files.conf" to control the group owner of log files * Added --with-max-log-size configure option * Added --enable-sync-on-close configure option * Added --with-error-policy configure option * IPP Everywhere PPDs could have an "unknown" default InputSlot * The httpAddrListen function now uses a listen backlog of 128. * Added USB quirks * Fixed IPP Everywhere v1.1 conformance issues in ippeveprinter. * Fixed DNS-SD name collision support in ippeveprinter. * Fixed compiler and code analyzer warnings. * Fixed TLS support on Windows. * Fixed ippfind sub-type searches with Avahi. * Fixed the default hostname used by ippeveprinter on macOS. * Fixed resolution of local IPP-USB printers with Avahi. * Fixed coverity issues * Fixed httpAddrConnect issues * Fixed web interface device URI issue * Fixed lp/lpr "printer/class not found" error reporting * Fixed xinetd support for LPD clients * Fixed libtool build issue * Fixed a memory leak in the scheduler * Fixed a potential integer overflow in the PPD hashing code * Fixed output-bin and print-quality handling issues * Fixed PPD options getting mapped to odd IPP values like "tray---4" * Fixed remote access to the cupsd.conf and log files * Fixed the automated test suite when running in certain build/CI environments * Fixed a logging regression caused by a previous change for Apple issue #5604 * Fixed fax phone number handling with GNOME * Fixed potential rounding error in rastertopwg filter * Fixed the "uri-security-supported" value from the scheduler * Fixed IPP backend crash bug with "printer-alert" values * Removed old Solaris inetconv(1m) reference in cups-lpd man page * Fixed default options that incorrectly use the "custom" prefix * Fixed a memory leak when resolving DNS-SD URIs * Fixed systemd status reporting by adopting the notify interface * Fixed crash in rastertopwg * Fixed cupsManualCopies values in IPP Everywhere PPDs - Removed let-cupsd-start-after-network.patch as it is no longer required - Removed CVE-2020-10001.patch as a fix as been merged upstream - Removed section of specfile responsible for renaming "org.cups.cups*" systemd files to cups*, due to upstream renaming these files - Remove code comments from expanded scriptlets to reduce size cf. https://build.opensuse.org/request/show/879976 - CVE-2020-10001.patch fixes CVE-2020-10001 (bsc#1180520) access to uninitialized buffer in ipp.c - Version upgrade to 2.3.3: * CVE-2020-3898: The 'ppdOpen' function did not handle invalid UI constraint. 'ppdcSource::get_resolution' function did not handle invalid resolution strings. * CVE-2019-8842: The 'ippReadIO' function may under-read an extension field. * Fixed WARNING_OPTIONS support for GCC 9.x Changes in CUPS 2.3.2: Localization updates Changes in CUPS 2.3.1: * CVE-2019-2228: The 'ippSetValuetag' function did not validate the default language value. * Fixed a crash bug in the web interface. * The PPD cache code now looks up page sizes using their dimensions. * PPD files containing "custom" option keywords did not work. * Added a workaround for the scheduler's systemd support. * Added a DigestOptions directive for the 'client.conf' file to control whether MD5-based Digest authentication is allowed. * Fixed a bug in the handling of printer resource files. * The libusb-based USB backend now reports an error when the distribution permissions are wrong. * Added paint can labels to Dymo driver. * The 'ippeveprinter' program now supports authentication. * The 'ippeveprinter' program now advertises DNS-SD services on the correct interfaces, and provides a way to turn them off. * The '--with-dbusdir' option was ignored by the configure script. * Sandboxed applications were not able to get the default printer. * Log file access controls were not preserved by 'cupsctl'. * Default printers set with 'lpoptions' did not work in all cases. * Fixed an error in the jobs web interface template. * Fixed an off-by-one error in 'ippEnumString'. * Fixed some new compiler warnings. * Fixed a few issues with the Apple Raster support. * The IPP backend did not detect all cases where a job should be retried using a raster format. * Fixed spelling of "fold-accordion". * Fixed the default common name for TLS certificates used by 'ippeveprinter'. * Fixed the option names used for IPP Everywhere finishing options. * Added support for the second roll of the DYMO Twin/DUO label printers. Changes in CUPS v2.3.0: * CVE-2019-8696 and CVE-2019-8675: Fixed SNMP buffer overflows. * Added a GPL2/LGPL2 exception to the new CUPS license terms. * Fixed a bug in the scheduler job cleanup code. * Fixed builds when there is no TLS library. * "make" failed with GZIP options. * Fixed potential excess logging from the scheduler when removing job files. * Fixed a NULL pointer dereference bug in 'httpGetSubField2'. * Added FIPS-140 workarounds for GNU TLS. * The scheduler no longer provides a default value for the description. * The scheduler now logs jobs held for authentication using the error level so it is clear what happened. * The 'lpadmin' command did not always update the PPD file for changes to the 'cupsIPPSupplies' and 'cupsSNMPSupplies' keywords. * The scheduler now uses both the group's membership list as well as the various OS-specific membership functions to determine whether a user belongs to a named group. * Added USB quirks rule for HP LaserJet 1015. * Fixed some PPD parser issues. * The IPP parser no longer allows invalid member attributes in collections. * The configure script now treats the "wheel" group as a potential system group. * Fixed IPP buffer overflow. * Fixed memory disclosure issue in the scheduler. * Fixed DoS issues in the scheduler. * Fixed an issue with unsupported "sides" values in the IPP backend. * The scheduler would restart continuously when idle and printers were not shared. * Fixed an issue with 'EXPECT !name WITH-VALUE ...' tests. * Fixed a command ordering issue in the Zebra ZPL driver. * Fixed a memory leak in 'ppdOpen'. Changes in CUPS v2.3rc1: * The 'cups-config' script no longer adds extra libraries when linking against shared libraries. * The supplied example print documents have been optimized for size. * The 'cupsctl' command now prevents setting "cups-files.conf" directives. * The "forbidden" message in the web interface is now explained. * The footer in the web interface covered some content on small displays. * The libusb-based USB backend now enforces read limits, improving print speed in many cases. * The 'ippeveprinter' command now looks for print commands in the "command" subdirectory. * The 'ipptool' command now supports '$date-current' and '$date-start' variables to insert the current and starting date and time values, as well as ISO-8601 relative time values such as "PT30S" for 30 seconds in the future. Changes in CUPS v2.3b8 * Media size matching now uses a tolerance of 0.5mm. * The lpadmin command would hang with a bad PPD file. * Fixed a potential crash bug in cups-driverd. * Fixed a performance regression with large PPDs. * Fixed a memory reallocation bug in HTTP header value expansion. * Timed out job submission now yields an error. * Restored minimal support for the 'Emulators' keyword in PPD files to allow old Samsung printer drivers to continue to work. * The scheduler did not encode octetString values like "job-password" correctly for the print filters. * The 'cupsCheckDestSupported' function did not check octetString values correctly. * Added support for 'UserAgentTokens' directive in "client.conf". * Updated the systemd service file for cupsd. * The 'ippValidateAttribute' function did not catch all instances of invalid UTF-8 strings. * Fixed an issue with the self-signed certificates generated by GNU TLS. * Fixed a potential memory leak when reading at the end of a file. * Fixed potential unaligned accesses in the string pool. * Fixed a potential memory leak when loading a PPD file. * Added a USB quirks rule for the Lexmark E120n. * Updated the USB quirks rule for Zebra label printers. * The lpadmin command, web interface, and scheduler all queried an IPP Everywhere printer differently, resulting in different PPDs for the same printer. * The web interface no longer provides access to the log files. * Non-Kerberized printing to Windows via IPP was broken. * The scheduler no longer stops a printer if an error occurs when a job is canceled or aborted. * Added a USB quirks rule for the DYMO 450 Turbo. * Added a USB quirks rule for Xerox printers. * The scheduler's self-signed certificate did not include all of the alternate names for the server when using GNU TLS. * Fixed some PPD caching and IPP Everywhere PPD accounting/password bugs. * Fixed 'PreserveJobHistory' bug with time values. * The scheduler no longer advertises the HTTP methods it supports. * The scheduler did not always idle exit as quickly as it could. * Added a new 'ippeveprinter' command based on the old ippserver sample code. Changes in CUPS v2.3b7 * Running ppdmerge with the same input and output filenames did not work as advertised. * Rebase let-cupsd-start-after-network.patch and cups-config-libs.patch. * Drop issue5509-fix-utf-8-validation-issue.patch and issue5453.patch: fixed upstream. - make cups-devel pull in cups-rpm-helper to fix printer driver provides (boo#1172407) - Fixes for %_libexecdir changing to /usr/libexec - Add issue5509-fix-utf-8-validation-issue.patch (bsc#1118118) Fixes https://github.com/apple/cups/issues/5509 - Remove libcupscgi1, libcupsmime1, libcupsppdc1 from baselibs.conf - Version upgrade to 2.3b6: This is the sixth beta of the CUPS 2.3 series which adopts the new CUPS license, adds support for IPP presets and finishing templates, and fixes a number of bugs and "polish" issues. For details see https://github.com/apple/cups/releases or the CHANGES.md file. Backward incompatible changes: * The cupsaddsmb program has been removed (Issue #5449) * The cupstestdsc program has been removed (Issue #5450) * The cupscgi, cupsmime, and cupsppdc support libraries are no longer installed as shared libraries. Changes include: * CVE-2018-4700: Linux session cookies used a predictable random number seed. * The lpoptions command now works with IPP Everywhere printers that have not yet been added as local queues (Issue #5045) * The lpadmin command would create a non-working printer in some error cases (Issue #5305) * The scheduler would crash if an empty AccessLog directive was specified (Issue #5309) * The scheduler did not idle-exit on some Linux distributions (Issue #5319) * Fixed a regression in the changes to ippValidateAttribute (Issue #5322, Issue #5330) * Fixed a crash bug in the Epson dot matrix driver (Issue #5323) * Automatic debug logging of job errors did not work with systemd (Issue #5337) * The web interface did not list the IPP Everywhere "driver" (Issue #5338) * The scheduler did not report all of the supported job options and values (Issue #5340) * The IPP Everywhere "driver" now properly supports face-up printers (Issue #5345) * Fixed some typos in the label printer drivers (Issue #5350) * Setting the Community name to the empty string in snmp.conf now disables SNMP supply level monitoring by all the standard network backends (Issue #5354) * Multi-file jobs could get stuck if the backend failed (Issue #5359, Issue #5413) * The IPP Everywhere "driver" no longer does local filtering when printing to a shared CUPS printer (Issue #5361) * The lpadmin command now correctly reports IPP errors when configuring an IPP Everywhere printer (Issue #5370) * Fixed some memory leaks discovered by Coverity (Issue #5375) * The PPD compiler incorrectly terminated JCL options (Issue #5379) * The cupstestppd utility did not generate errors for missing/mismatched CloseUI/JCLCloseUI keywords (Issue #5381) * The scheduler now reports the actual location of the log file (Issue #5398) * The generated PPD files for IPP Everywhere printers did not contain the cupsManualCopies keyword (Issue #5433) * Kerberos credentials might be truncated (Issue #5435) * The handling of MaxJobTime 0 did not match the documentation (Issue #5438) * Fixed a bug adding a queue with the -E option (Issue #5440) * The scheduler did not validate that required initial request attributes were in the operation group (rdar://41098178) * Fixed an issue with HTTP Digest authentication (rdar://41709086) * The scheduler could crash when job history was purged (rdar://42198057) * Fixed a crash bug when mapping PPD duplex options to IPP attributes (rdar://46183976) * Fixed a memory leak for some IPP (extension) syntaxes. * The snmp backend is now deprecated. - issue5453.patch fixes https://github.com/apple/cups/issues/5453 - Version upgrade to 2.3b5: This is the fifth beta of the CUPS 2.3 series which adopts the new CUPS license, adds support for IPP presets and finishing templates, and fixes a number of bugs and "polish" issues. For details see https://github.com/apple/cups/releases or the CHANGES.md file. Changes include: * The ipptool program no longer checks for duplicate attributes when running in list or CSV mode (Issue #5278) * The cupsCreateJob, cupsPrintFile2, and cupsPrintFiles2 APIs did not use the supplied HTTP connection (Issue #5288) * Fixed another crash in the scheduler when adding an IPP Everywhere printer (Issue #5290) * Added a workaround for certain web browsers that do not support multiple authentication schemes in a single response header (Issue #5289) * Fixed policy limits containing the All operation (Issue #5296) * The scheduler was always restarted after idle-exit with systemd (Issue #5297) * The mailto notifier did not wait for the welcome message (Issue #5312) * Fixed a parsing bug in the pstops filter (Issue #5321) * The scheduler allowed environment variables to be specified in the cupsd.conf file (rdar://37836779, rdar://37836995, rdar://37837252, rdar://37837581) * Fax queues did not support pause (p) or wait-for-dialtone (w) characters (rdar://39212256) * The scheduler did not validate notify-recipient-uri values properly (rdar://40068936) * The IPP parser allowed invalid group tags (rdar://40442124) * Fixed a parsing bug in the new authentication code. - issue5296_fix_policy_limits_using_All.patch is obsolete because it is fixed upstream (see "Issue #5296" above) - Add patch let-cupsd-start-after-network.patch Let cuspd start after possible network connection (boo#1111351) This let cupsd also stop before a used network connection goes down, hence the cusp does not lock due waiting on remote printers. - Fix warning message upon update (boo#1050845): Remove template service cups-lpd@ from service_* macro in scriptlets. - issue5296_fix_policy_limits_using_All.patch fixes https://github.com/apple/cups/issues/5296 by only the actually relevant part of https://github.com/apple/cups/commit/0873f681e43c04972b3d6bc90bdbdedb29e6e913 (follow-up of boo#936309 and bsc#577936 starting at comment 13) - Version upgrade to 2.3b4: This is the fourth beta of the CUPS 2.3 series. For details see https://github.com/apple/cups/releases or the CHANGES.md file. Changes include: * Additional security fixes for: bsc#1061066 DBUS library aborts caller process in _dbus_check_is_valid_utf8 (in particular that aborts cupsd) and bsc#1087018 CVE-2017-18248: cups: The add_job function in scheduler/ipp.c in CUPS before 2.2.6, when D-Bus support is enabled, can be crashed by remote attackers by sending print jobs with an invalid username, related to a D-Bus notification which are the CUPS upstream issues https://github.com/apple/cups/issues/5143 Remote DoS attack against cupsd via invalid username and malicious D-Bus library and https://github.com/apple/cups/issues/5186 squash non-UTF-8 strings into ASCII on plain IPP level and https://github.com/apple/cups/issues/5229 persistently substitute invalid job attributes with default values - not only in add_job see also bsc#1087072 dbus-1: Disable assertions to prevent un-expected DDoS attacks * NOTICE: Raw print queues are now deprecated (Issue #5269) so that now there is a warning message when you add or modify a queue to use the "raw driver" but raw printing will continue to work through CUPS 2.3.x, cf. https://lists.cups.org/pipermail/cups/2018-March/074060.html * Kerberized printing to another CUPS server did not work correctly (Issue #5233) * The scheduler now supports using temporary print queues for older IPP/1.1 print queues like those shared by CUPS 1.3 and earlier (Issue #5241) * Systemd did not restart cupsd when configuration changes were made that required a restart (Issue #5263) * Fixed an Avahi crash bug in the scheduler (Issue #5268) * TLS connections now properly timeout (rdar://34938533) * Removed support for the '-D_PPD_DEPRECATED=""' developer cheat - the PPD API should no longer be used. * Removed support for '-D_IPP_PRIVATE_STRUCTURES=1' developer cheat - the IPP accessor functions should be used instead. * The symlink rastertodymo -> rastertolabel in /usr/lib/cups/filter is no longer provided. - Removed fix_filter_Makefile.patch because since CUPS 2.3b4 it is fixed in the upstream code via https://github.com/apple/cups/issues/5247 more precisely via https://github.com/apple/cups/commit/ab89234de2d9bf36bb59f2aa4873d98e95ca4df2 - Version upgrade to 2.3b3: This is the third beta of the CUPS 2.3 series. For details see https://github.com/apple/cups/releases Changes include: * More fixes for printing to old CUPS servers (Issue #5211) * Additional changes for the scheduler to substitute default values for invalid job attributes when running in "relaxed conformance" mode (Issue #5229 - a follow-up of issues #5186 and #5143) A detailed list of changes can be found in the CHANGES.md file. - fix_filter_Makefile.patch fixes https://github.com/apple/cups/issues/5247 - Version upgrade to 2.3b2: This is the second beta of the CUPS 2.3 series. For details see https://github.com/apple/cups/releases Changes include: * Printing to old CUPS servers has been fixed (Issue #5211) A detailed list of changes can be found in the CHANGES.md file. - Version upgrade to 2.3b1: This is the first beta of the CUPS 2.3 series which adopts the new CUPS license (Apache License, Version 2.0), adds support for IPP presets and finishing templates, and fixes a number of bugs and "polish" issues. For details see https://github.com/apple/cups/releases Changes include: * CUPS is now provided under the Apache License, Version 2.0 * The CUPS library now supports the latest HTTP Digest authentication specification including support for SHA-256 (Issue #4862) * Dropped RSS subscription management from the web interface (Issue #5012) * The lpadmin command now provides a better error message when an unsupported System V interface script is used (Issue #5111) * The SSLOptions directive now supports MinTLS and MaxTLS options to control the minimum and maximum TLS versions that will be allowed, respectively (Issue #5119) * Dropped hard-coded CGI scripting language support (Issue #5124) * The scheduler now substitutes default values for invalid job attributes when running in "relaxed conformance" mode (Issue #5186 - a follow-up of issue #5143) A detailed list of changes can be found in the CHANGES.md file. - Make sure cups-libs- is removed. - Version upgrade to 2.2.6: CUPS 2.2.6 is a general bug fix release. For details see https://github.com/apple/cups/releases Changes include: * DBUS notifications could crash the scheduler (Issue #5143) (see also bsc#1061066 "DBUS library aborts caller process") A detailed list of changes can be found in the CHANGES.md file. - Use again the baselibs.conf from Fri Oct 13 11:11:10 UTC 2017 that got broken by the change on Wed Oct 18 06:11:10 UTC 2017. - Version upgrade to 2.2.5: CUPS 2.2.5 is a general bug fix release. For details see https://github.com/apple/cups/releases - Version upgrade to 2.2.4: CUPS 2.2.4 is a general bug fix release. For details see https://github.com/apple/cups/releases - Removed 0001-Update-cupsEnumDests-implementation-to-return-early-if-all.patch 0002-Save-work-on-Avahi-code.patch 0003-Avahi-fixes-for-cupsEnumDests.patch because since CUPS 2.2.4 it is fixed in the upstream code via https://github.com/apple/cups/pull/4989 more precisely via https://github.com/apple/cups/commit/a2187a63425a3d6c05de1e1cbf8c26fd39a1aced https://github.com/apple/cups/commit/657c5b5f91e6d5120c4ad7b118cf9098dd27f03d https://github.com/apple/cups/commit/3fae3b337df0be1a766857be741173d8a9915da7 - Fix typo in requires - Implement shared library packaging guideline [boo#862112] - Update package descriptions. - Remove redundant Requires(pre) line ? the use of %post -p already implies it. - Pre-require user(lp) in cups-libs - In /usr/lib/tmpfiles.d/cups.conf use group 'root' for /run/cups/certs (boo#1042916). - Major backward incompatible change since CUPS 2.2.0: There is no longer the directory /etc/cups/interfaces because since CUPS 2.2.0 so called "System V style Interface Scripts" are no longer supported for security reasons (see below the entry about the changes included in CUPS 2.2.0). - Disabled cups-2.1.0-cups-systemd-socket.patch because it does no longer apply which needs to be examined and decided by someone who knows about systemd internals. - Disabled 0001-Update-cupsEnumDests-implementation-to-return-early-if-all.patch 0002-Save-work-on-Avahi-code.patch 0003-Avahi-fixes-for-cupsEnumDests.patch because they do no longer apply which needs to be examined and decided by someone who knows about Avahi internals. - Version upgrade to 2.2.3: CUPS 2.2.3 is a general bug fix release. See https://github.com/apple/cups/releases Changes include: * The IPP backend could get into an infinite loop for certain errors, causing a hung queue (rdar://problem/28008717) * The scheduler could pause responding to client requests in order to save state changes to disk (rdar://problem/28690656) * Added support for PPD finishing keywords (Issue #4960, Issue #4961, Issue #4962) * The IPP backend did not send a media-col attribute for just the source or type (Issue #4963) * IPP Everywhere print queues did not always support all print qualities supported by the printer (Issue #4953) * IPP Everywhere print queues did not always support all media types supported by the printer (Issue #4953) * The IPP Everywhere PPD generator did not return useful error messages (Issue #4954) * The IPP Everywhere finishings support did not work correctly with common UI or command-line options (Issue #4976) * Fixed an error handling issue for the network backends (Issue #4979) * The "reprint job" option was not available for some canceled jobs (Issue #4915) * Updated the job listing in the web interface (Issue #4978) A detailed list of changes can be found in the CHANGES.txt file. - Version upgrade to 2.2.2: CUPS 2.2.2 is a general bug fix release. See https://github.com/apple/cups/releases Changes include: * Fixed some issues with IPP Everywhere printer support (Issue #4893, Issue #4909, Issue #4916, Issue #4921, Issue #4923, Issue #4932, Issue #4933, Issue #4938) * The rastertopwg filter could crash with certain input (Issue #4942) * The scheduler did not detect when an encrypted connection was closed by the client on Linux (Issue #4901) * The cups-lpd program did not catch all legacy usage of ISO-8859-1 (Issue #4899) * The scheduler no longer creates log files on startup () * The ippContainsString function now uses case-insensitive comparisons for mimeMediaType, name, and text values in conformance with RFC 2911. * The network backends now log the addresses that were found for a printer () * Let's Encrypt certificates did not work when the hostname contained uppercase letters (Issue #4919) * Fixed reporting of printed pages in the web interface (Issue #4924) * Updated systemd config files (Issue #4935) A detailed list of changes can be found in the CHANGES.txt file. - Version upgrade to 2.2.1: CUPS 2.2.1 is a general bug fix release. See https://github.com/apple/cups/releases Changes include: * Added "CreateSelfSignedCerts" directive for cups-files.conf to control whether the scheduler automatically creates its own self-signed X.509 certificates for TLS connections (Issue #4876) * http*Connect did not handle partial failures (Issue #4870) * cupsHashData did not use the correct hashing algorithm () * Updated man pages (PR #4885) A detailed list of changes can be found in the CHANGES.txt file. - Version upgrade to 2.2.0: CUPS 2.2.0 adds support for local IPP Everywhere print queues and includes several performance and security improvements. See https://github.com/apple/cups/releases Changes include: * Normalized the TLS certificate validation code and added additional error messages to aid troubleshooting. * http*Connect did not work on Linux when cupsd was not running (Issue #4870) * The --no-remote-any option of cupsctl had no effect (Issue #4866) * http*Connect did not return early when all addresses failed (Issue #4870) * The IPP backend did not validate TLS credentials properly. * The printer-state-message attribute was not cleared after a print job with no errors (Issue #4851) * The CUPS-Add-Modify-Class and CUPS-Add-Modify-Printer operations did not always return an error for failed adds (Issue #4854) * PPD files with names longer than 127 bytes did not work (Issue #4860) * CUPS now supports Let's Encrypt certificates on Linux. * All CUPS commands now support POSIX options (Issue #4813) * The scheduler now restarts faster (Issue #4760) * Improved performance of web interface with large numbers of jobs (Issue #3819) * Encrypted printing can now be limited to only trusted printers and servers () * The scheduler now advertises PWG Raster attributes for IPP Everywhere clients (Issue #4428) * The scheduler now logs informational messages for jobs at LogLevel "info" (Issue #4815) * The scheduler now uses the getgrouplist function when available (Issue #4611) * The IPP backend no longer enables compression by default except for certain raster formats that generally benefit from it () * The scheduler did not handle out-of-disk situations gracefully (Issue #4742) * The LPD mini-daemon now detects invalid UTF-8 sequences in job, document, and user names (Issue #4748) * The IPP backend now continues on to the next job when the remote server/printer puts the job on hold () * The scheduler did not cancel multi-document jobs immediately () * The scheduler did not return non-shared printers to local clients unless they connected to the domain socket () * The scheduler now reads the spool directory if one or more job cache entries point to deleted jobs () * Added support for disc media sizes () * The httpAddrConnect and httpConnect* APIs now try connecting to multiple addresses in parallel () * Interface scripts are no longer supported for security reasons () A detailed list of changes can be found in the CHANGES.txt file. - Version upgrade to 2.1.4: CUPS 2.1.4 is a general bug fix release. See https://github.com/apple/cups/releases Changes include: * Fixed reporting of 1284 Device IDs (Issue #3835, PR #3836) * Fixed printing of multiple files to raw queues (Issue #4782) * The scheduler did not implement the Hold-New-Jobs opertion correctly (Issue #4767) * The cups-lpd mini-daemon incorrectly included the document-name attribute when creating a job. It should only be included when sending a job (Issue #4790) A detailed list of changes can be found in the CHANGES.txt file. - Replace krb5-devel BuildRequires with pkgconfig(krb5) on suse_version >= 1315: give OBS a better chance to break up build cycles. - Drop cups-1.7.5-cupsEnumDests-react-to-all-for-now.diff and add 0001-Update-cupsEnumDests-implementation-to-return-early-if-all.patch, 0002-Save-work-on-Avahi-code.patch and 0003-Avahi-fixes-for-cupsEnumDests.patch which is what upstream finally commited to cups 2.2 sources in response to https://github.com/apple/cups/pull/4989 in order to fix cupsEnumDests to react to the ALL_FOR_NOW avahi event (and also include a similar fix for the dnssd case). Related to bsc#955432. - Add cups-2.1.3-cupsEnumDests-react-to-all-for-now.diff . Avahi sends an ALL_FOR_NOW event when it finishes sending its cache contents. This patch makes cupsEnumDests finish when the signal is received so it doesn't block the caller doing nothing until the timeout finishes (related to bsc#955432, submitted upstream at https://github.com/apple/cups/pull/4989) - Add /etc/cups to cups-libs package [bsc#1025689] - Replace pkgconfig(libsystemd-daemon) BuildRequires with pkgconfig(libsystemd) on openSUSE 13.2 and newer: the various sub-libraries have been merged into libsystemd since version 209. openSUSE 13.1 was the last product to ship systemd 208. - Remove CUPS.desktop and pixmap * Obsoletes patch cups-1.3.9-desktop_file.patch - Version upgrade to 2.1.3: CUPS 2.1.3 fixes some issues in the scheduler, sample drivers, and user commands. A detailed list of changes can be found in the CHANGES.txt file. Changes include (excerpt): * The scheduler should not exit under memory pressure () * Fixed some issues in ipptool for skipped tests () * The "lp -H resume" command did not reset the "job-state-reasons" attribute value (STR #4752) * The scheduler did not allow access to resource files (icons, etc.) when the web interface was disabled (STR #4755) - Version upgrade to 2.1.2: CUPS 2.1.2 fixes an issue in the 2.1.1 source archives which actually contained a current 2.2 snapshot. There are no other changes. - Version upgrade to 2.1.1: CUPS 2.1.1 fixes a number of USB and IPP printing issues, addresses some error reporting and hardening issues in the scheduler, and updates some localizations. A detailed list of changes can be found in the CHANGES.txt file. Changes include (excerpt): * Security hardening fixes (, , , , , , , , , , , , , , , , , , , ) * The cupsGetPPD* functions did not work with IPP printers (STR #4725) * Some older HP LaserJet printers need a delayed close when printing using the libusb-based USB backend (STR #4549) * The libusb-based USB backend did not unload the kernel usblp module if it was preventing the backend from accessing the printer (STR #4707) * Current Primera printers were incorrectly reported as Fargo printers (STR #4708) * The IPP backend did not always handle jobs getting canceled at the printer () * Added USB quirk for Canon MP530 (STR #4730) * The scheduler did not deliver job notifications for jobs submitted to classes (STR #4733) * Changing the printer-is-shared value for a remote queue did not produce an error (STR #4738) * The IPP backend incorrectly included the job-password attribute in Validate-Job requests () - add -devel to build a 32bit wine on 64bit only Leap systems. - Version upgrade to 2.1.0: CUPS 2.1.0 offers improved support for IPP Everywhere, adds support for advanced logging using journald on Linux, and includes new security features for encrypted printing and reduced network visibility in the default configuration. A detailed list of changes can be found in the CHANGES.txt file. Changes include (excerpt): * Added support for 3D printers (basic types only, no built-in filters) based on PWG white paper. * The IPP backend now stops sending print data if the printer indicates the job has been aborted or canceled () * The IPP backend now sends the job-pages-per-set attribute when printing multiple copy jobs with finishings () * The IPP backend now updates the cupsMandatory values when the printer configuration changes () * No longer install banner files since third-party banner filters now supply their own (STR #4518) * The scheduler no longer listens on the loopback interface unless the web interface or printer sharing are enabled () * Added a PPD generator for IPP Everywhere printers (STR #4258) * Now install "default" versions of more configuration files () in particular cups-files.conf.default and snmp.conf.default * Added SSLOptions values to allow Diffie-Hellman key exchange and disable TLS/1.0 support. * Updated the scheduler to support more IPP Everywhere attributes (STR #4630) * The scheduler now supports advanced ASL and journald logging when "syslog" output is configured (STR #4474) * The scheduler now supports logging to stderr when running in the foreground (STR #4505) - Adapted patches so that they apply to CUPS 2.1.0 sources: * cups-2.1.0-choose-uri-template.patch replaces cups-1.2rc1-template.patch * cups-2.1.0-default-webcontent-path.patch replaces cups-1.4.3-default-webcontent-path.patch * cups-2.1.0-cups-systemd-socket.patch replaces cups-systemd-socket.patch - Fix bnc#943950, escape the macro call %systemd-tmpfiles in comment. - Add gpg verification for the tarball - Version update to 2.0.4: * Fixed a bug in cupsRasterWritePixels (STR #4650) * Fixed redirection in the web interface (STR #4538) * The IPP backend did not respond to side-channel requests (STR #4645) * The scheduler did not start all pending jobs at once (STR #4646) * The web search incorrectly searched time-at-xxx values (STR #4652) * Fixed an RPM spec file issue (STR #4657) * The scheduler incorrectly started jobs while canceling multiple jobs (STR #4648) * Fixed processing of server overrides without port numbers (STR #4675) * Documentation changes (STR #4651, STR #4674) - cups-2.0.3-additional_policies.patch replaces cups-1.7-additional_policies.patch that still adds the same "allowallforanybody" policy but now with separated "Limit All" to avoid https://www.cups.org/str.php?L4659 (boo#936309). - Added "-p /bin/bash" to RPM shell commands scriptlets that enforces bash to be safe against any possible "bashisms", cf https://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets - Fix the previous commit by using direct systemd call and ensuring we work even on older distros - Fix postin-without-tmpfile-creation and run %tmpfiles_create macro on our cups.conf - Version upgrade to 2.0.3: The new release addresses two security vulnerabilities, add localizations for German and Russian, and includes several general bug fixes. Changes include (excerpt): * Security: Fixed CERT VU #810572 CVE-2015-1158 CVE-2015-1159 exploiting the dynamic linker (STR #4609) (bsc#924208) * Security: The scheduler could hang with malformed gzip data (STR #4602) * Restored missing generic printer icon file (STR #4587) * Fixed logging of configuration errors to show up as errors (STR #4582) * Fixed potential buffer overflows in raster code and filters (STR #4598, STR #4599, STR #4600, STR #4601) * Fixed inside (STR #4575) * Fixed lpadmin when both -m and -o are used (STR #4578) * The web interface always showed support for 2-sided printing (STR #4595) * cupsRasterReadHeader did not fully validate the raster header (STR #4596) * The rastertopwg filter did not check for truncated input (STR #4597) * The cups-lpd mini-daemon did not check for request parameters (STR #4603) * The scheduler could get caught in a busy loop (STR #4605) * The sample Epson driver could crash (STR #4616) * The IPP backend now correctly monitors jobs () * The ppdhtml and ppdpo utilities crashed when the -D option was used before a driver information file (STR #4627) * ippfind incorrectly substituted "=port" for service_port. * The IPP/1.1 test file did not handle the initial print job completing early (STR #4576) * Fixed a memory leak in cupsConnectDest (STR #4634) * PWG Raster Format output contained invalid ImageBox values () * Added Russian translation (STR #4577) * Added German translation (STR #4635) - cups-busy-loop.patch fixed STR #4605 is obsolete because it is fixed upstream (see above). - cleaned up this whole RPM changlog (wrapped too long lines if possible and removed trailing whitespaces). - Add patch cups-busy-loop.patch to fix rh#1179596 , cups#4605 - Add back the posttrans cleanup script as it is needed - Add patch cups-systemd-socket.patch to fix socket activation and to match socket approach Fedora has. - Version bump to 2.0.2: * Security: cupsRasterReadPixels buffer overflow with invalid page header and compressed raster data (STR #4551) * Mapping of PPD keywords to IPP keywords did not work if the PPD keyword was already an IPP keyword () * cupsGetPPD* sent bad requests (STR #4567) * For detailed list see CHANGES.txt file - Enable PIE for build - Remove legacy paralel-port support as it is not really needed as most do not want it - Update descriptions to just state what changed and let user find it out. - Add back comment about %fdupes - Remove exit 0 on scriptlets as it is provided by the %service bla ones already - Fix the comment about openSUSE version on tmpfilesdir declaration - cups-2.0.1 update: * lengthy list of changes see the upstream CHANGES.txt that is distributed with the package * Disabling of sslv3 to mitigate poodle - Use gnutls to provide SSLOPtions configuration directive * openssl is no longer supported upstream * Remove the with-openssl-exception from license - Remove cups.sysconfig as it is not used with systemd based distros - Purposely lose support for SLE11 as it doubles size of some of the sections and keep suppor for openSUSE+SLE12 * even with the conditions we would have to go unencrypted only as needs newer gnutls, so don't bother with keeping the compat - Use upstream service and socket files to allow more working tools - Removed patches: * cups-0001-systemd-add-systemd-socket-activation-and-unit-files.patch * cups-0002-systemd-listen-only-on-localhost-for-socket-activation.patch * cups-0003-systemd-secure-cups.service-unit-file.patch * cups-1.3.6-access_conf.patch * cups-1.5-additional_policies.patch * cups-1.5.4-CVE-2012-5519.patch * cups-1.5.4-strftime.patch * cups-move-everything-to-run.patch * cups-polld_avoid_busy_loop.patch * cups-provides-cupsd-service.patch * str4190.patch * str4351.patch * str4450.CVE-2014-3537.str4455.CVE-2014-5029.CVE-2014-5030.CVE-2014-5031.CUPS-1.5.4.patch - Refreshed patches: * cups-1.3.9-desktop_file.patch * cups-config-libs.patch - Added patches: * cups-1.7-additional_policies.patch * cups-systemd-socket.patch - change BuildRequires for systemd to pkgconfig(systemd) and pkgconfig(libsystemd-daemon) to avoid build-cycles - Version upgrade to 1.7.5: CUPS 1.7.5 addresses some minor issues and expands upon the symlink security protection. Changes include (excerpt): * Security: Addressed some more situations where symlinked files would be served by the web interface (CVE-2014-5029 CVE-2014-5030 CVE-2014-5031 STR #4455 and bnc#887240). * The LPD backend did not work with some versions of glibc (STR #4452) * CGI scripts did not work (STR #4454) - str4455-1.7.patch (see the previous entry below) is obsolete because it is fixed upstream since CUPS 1.7.5. - Let fdupes only create symlinks in /usr/share/cups/templates/ to avoid a symlink /usr/share/cups/webcontent/images/cups-icon.png because since CUPS 1.7.4/1.7.5 the cupsd web server does no longer follow symlinks to avoid the security issues mentioned in the previous two entries below (fixes bnc#892587 a regression of bnc#887240). - str4455-1.7.patch complements the incomplete fix for CVE-2014-3537 STR#445 in the CUPS 1.7.4 sources to fix the subsequent CVE-2014-5029 CVE-2014-5030 CVE-2014-5031 STR#4455 (bnc#887240). - Version upgrade to 1.7.4: CUPS 1.7.4 fixes several networking and build issues, and addresses a symlink security issue CVE-2014-3537. Changes since 1.7.3 include (excerpt): * Security: The web interface incorrectly served symlinked files and files that were not world-readable, potentially leading to a disclosure of information (CVE-2014-3537, STR #4450, and bnc#887240). * The "snmp" option did not work with the network backends (STR #4422). * The User directive in client.conf did not override the USER environment variable (STR #4426). * The web interface now properly shows a "Go" button for all text-based browsers (STR #4425). * The MaxJobTime directive now properly supports time values (STR #4434). * Fixed an "IPP read error" race condition issue (STR #4440). - Version upgrade to 1.7.3: CUPS 1.7.3 includes a number of general bug fixes. Changes since 1.7.2 include (excerpt): * Fixed mapping of OutputBin values such as "Tray1". * Several ippGet* functions incorrectly returned -1 instead of 0 on error. * Fixed an authentication race condition in cupsSendRequest (STR #4403). * The scheduler did not add the "job-hold-until-specified" reason when holding a job using the lp command (STR #4405). * Auto-typing of PWG Raster files did not work (STR #4417). * IPP queues using hardcoded credentials would ask for credentials (STR #4371). - Version upgrade to 1.7.2: CUPS 1.7.2 addresses a web interface redirection security issue, some scheduler crashed on Linux, and other general bug fixes. Changes since 1.7.1 include (excerpt): * CVE-2014-2856: The scheduler now blocks URLs containing embedded HTML (STR #4356 and bnc#873899). * cupsDoIORequest could miss the server status, causing failed lpadmin and other administrative commands (STR #4386). * Fixed a D-BUS threading issue that caused the scheduler to crash (STR #4347). * The scheduler now automatically reconnects to Avahi as needed (STR #4370, STR #4373). - str4351.patch that fixed STR #4351: cups-lpd hugh jobs (>2G) fail is obsolete because it is fixed upstream since CUPS 1.7.2. - Removed the CUPS banner files in /usr/share/cups/banners/ and the CUPS testpage /usr/share/cups/data/testprint (which is also a CUPS banner file type) because they do no longer work since CUPS >= 1.6 (see http://www.cups.org/str.php?L4120) because there is no longer a filter for Linux that can convert the CUPS banner files. Since CUPS >= 1.6 only the banner files and testpage in the cups-filters package work via the cups-filters PDF workflow and the cups-filters package also provides the matching bannertopdf filter (bnc#873376). - In case of systemd use --with-rundir=/run/cups instead of --with-rundir=/run (bnc#871640). - str4351.patch from CUPS upstream fixes https://www.cups.org/str.php?L4351 "STR #4351 cups-lpd hugh jobs (>2G) fail" (bnc#864782). - Version upgrade to 1.7.1 (fate#314630): CUPS >= 1.6 has major incompatible changes compared to CUPS up to version 1.5.4 in particular when printing via network: * The IPP protocol default version increased form 1.1 to 2.0. Older IPP servers like CUPS 1.3.x (e.g. in SLE11) reject IPP 2.0 requests with "Bad Request" (STR #4231). By adding '/version=1.1' to ServerName in client.conf (e.g. ServerName older.server.example.com/version=1.1) or the CUPS_SERVER environment variable value or by adding it to the server name value of the '-h' opion (e.g. lpstat -h older.server.example.com/version=1.1 -p) the older IPP protocol version for older servers must be explicitly specified. * CUPS Browsing is dropped in CUPS but the new package cups-filters provides the cups-browsed that provides basic CUPS Browsing and Polling functionality. The native protocol in CUPS for automatic client discovery of printers is now DNS-SD. * Some printing filters and backends are dropped in CUPS but the new package cups-filters provides them so that cups-filters is usually needed (recommended by RPM) but cups-filters is not strictly required. * The cupsd configuration directives are split into two files cupsd.conf (can also be modified via HTTP PUT e.g. via cupsctl) and cups-files.conf (can only be modified manually by root) to have better default protection against misuse of privileges by normal users who have been specifically allowed by root to do cupsd configuration changes (STR #4223 CVE-2012-5519 bnc#789566). See the entries below for more information. For details see the openSUSE Bugzilla bnc#735404 issue. CUPS 1.7.1 improves network and USB printing, fixes some scheduler issues, and addresses a minor security issue in the lppasswd program. Changes since 1.7.0 include (excerpt): * Security: the lppasswd program incorrectly used settings from ~/.cups/client.conf (STR #4319) * ATTR messages could cause string pool memory corruption in the scheduler () * Printing to a raw queue could result in corrupt output due to opportunistic compression () * Japanese PPDs using with the Shift-JIS encoding did not work () * The libusb-based USB backend incorrectly used write timeouts () * The IPP backend did not wait for a busy printer to become available before attempting to print () * Using "@IF(name)" in an Allow or Deny rule did not work (STR #4328) * The D-BUS notifier did not remove its lockfile (STR #4314) * CUPS incorrectly used the USER environment variable when the name did not match the user ID (STR #4327) For details see the CHANGES.txt file. - cups-1.7-additional_policies.patch adds the 'allowallforanybody' policy to cupsd.conf (fate#303515) and replaces cups-1.6.2-adapt_cupsd.conf_defaults_for_SUSE.patch - Clean up of systemd unit files (bnc#857372): Make it working again as simple and secure as it worked all the time in the past by providing only one single systemd unit file cups.service. In particular currently YaST cannot manage services with additional other systemd unit files. Furthermore systemd socket activation is currently insecure in case of IPv6 (CVE-2012-6094 bnc#795624). - Clean up how cupsd is launched (via SysVinit or systemd) by maintaining strictly separated sections in cups.spec: Either for launching cupsd via systemd (if have_systemd is set) or for launching cupsd via SysVinit (if have_systemd is not set). SysVinit support cannot be removed because CUPS 1.7.1 still builds and can be used even for SLE11. - The default group of users who are allowed to do cupsd configuration changes via requests to the running cupsd (i.e. the SystemGroup directive in cupsd.conf) is set to 'root' only (related to STR #4223 CVE-2012-5519 bnc#789566). In this context a general security advice: When root allows normal users to do system administration tasks (in particular when root allows normal users to administer system processes - i.e. processes that run as root), then this or that kind of privilege escalation will be possible. Only trustworthy users who do not misuse their privileges may get allowed to do specific system administration tasks. - Version upgrade to 1.7.0 CUPS >= 1.6 has major incompatible changes compared to CUPS 1.5. See the entries below for more information. For details see the openSUSE Bugzilla bnc#735404 issue. Changes since 1.7rc1 include (excerpt): * The lpadmin command did not send the PPD name from the "-m" option (). * The scheduler did not respond using the hostname specified by the client (). * Fixed a couple memory leaks in ippfind that were reported by Clang. * Fixed a compile issue on 64-bit Linux with Clang - need to use the -pie option instead of -Wl,-pie now (). * The scheduler incorrectly did not pass a FINAL_CONTENT_TYPE environment variable to the filters or backend (). For details see the CHANGES.txt file. - Version upgrade to 1.7rc1 only for testing purpose. CUPS >= 1.6 has major incompatible changes compared to CUPS 1.5. After a version upgrade to CUPS >= 1.6 printing in the network would no longer work as it did up to CUPS 1.5. For details regarding incompatible changes in CUPS >= 1.6 see https://bugzilla.novell.com/show_bug.cgi?id=735404 and follow the links therein. The 1.7 series is primarily a "polish" release with improved support for paid, PIN, and release printing, expanded support for IPP Everywhere, automatic support for data compression, and improved CUPS APIs. CUPS 1.7rc1 is the first release candidate for CUPS 1.7.0 and includes the fixes from CUPS 1.6.3, adds a new ippfind utility, fixes some issues in the ipptool utility, and fixes some general printing bugs. For details what is new in CUPS 1.7 see the CHANGES.txt file. Excerpt: * Printer xxx-default values were not reported by Get-Printer-Attributes or lpoptions () * Added a new ippfind tool for finding IPP printers and other Bonjour services () - Version upgrade to 1.6.3 CUPS 1.6.3 fixes some compatibility issues with servers running CUPS 1.3.12 or older, fixes some general printing bugs, and fixes some minor security issues. For details what is new in CUPS 1.6 see the CHANGES-1.6.txt file. Excerpt: * The lp, lpq, lpr, and lpstat now display an error message advising the use of the /version=1.1 ServerName option () * Added documentation about the /version=1.1 option to ServerName in client.conf () * The lp, lpq, lpr, and lpstat commands incorrectly ignored the default printer set in the lpoptions file () * Printing using "ipps" URIs was not encrypted. - Version upgrade to 1.6.2. CUPS 1.6 has major incompatible changes compared to CUPS 1.5. For details regarding incompatible changes in CUPS 1.6 see https://bugzilla.novell.com/show_bug.cgi?id=735404 and follow the links therein. For details what is new in CUPS 1.6 see the CHANGES.txt file. Excerpt: * Security: All file, directory, user, and group settings are now stored in a separate cups-files.conf configuration file that cannot be set through the CUPS web interface or APIs (STR #4223). * The IPP backend could crash if the printer disconnects early (STR #4284). * cupsGetPPD did not work with statically-configured CUPS shared queues (STR #4178). * Bad IPP responses could crash ipptool (STR #4262). * Updated USB quirk rules for various printers (STR #4217, STR #4263, STR #4286). * Added USB blacklisting for printers that require a custom backend (STR #4218). * The CUPS library did not always detect a timed out connection to the server which could cause temporary loss of printing from applications (STR #4187). * The IPP backend now stops queues when the server configuration prevents successful job submission (STR #4125). * CUPS 1.6 clients using the ServerName directive in client.conf did not work with CUPS 1.3.x or older servers (STR #4231, STR #4291). * The scheduler could crash when using Avahi (STR #4183, STR #4192, STR #4200, STR #4213). * The IPP backend could get stuck in an endless loop on certain network errors (STR #4194). * The scheduler no longer allows job-name values that are not valid network Unicode strings (STR #4072). * The network backends now support disabling of SNMP supply level queries via the "snmp" URI option (STR #4106). * The IPP backend did not specify the compression used (STR #4181). * The scheduler did not recognize dnssd: or ipps: URIs as Bonjour shared queues (STR #4158). * Applications could not get the PPD file for statically-configured Bonjour-shared print queues (STR #4159). * Fixed a USB backend compatibility issue on systems using libusb (STR #4155, STR #4191). * Some Bonjour features were not available on systems with Avahi (STR #4156). - cups-1.6.1-revertSTR3929_to_default_IPP_1.1_again.patch is obsolete because it is fixed upstream (STR #4231, STR #4291). - cups-1.6.2-adapt_cupsd.conf_defaults_for_SUSE.patch replaces cups-1.6.1-adapt_cupsd.conf_defaults_for_SUSE.patch - Adapted cups-client.conf template file for CUPS 1.6. - cups-1.6.1-adapt_cupsd.conf_defaults_for_SUSE.patch adapts the defaults in cupsd.conf for SUSE. It replaces cups-1.3.6-access_conf.patch that added 'Allow 127.0.0.2' to cupsd.conf to allow access for the loopback IP address 127.0.0.2 which is set for the hostname by SUSE in /etc/hosts at least up to SLE10 products. It also replaces cups-1.5-additional_policies.patch that added the 'allowallforanybody' policy to cupsd.conf see https://fate.novell.com/303515 Furthermore it fixes some issues with the CUPS upstream defaults i.e. removal of no longer supported keywords BrowseOrder BrowseAllow DefaultAuthType (otherwise cupsd prints error messages of the form "Unknown directive BrowseOrder on line 22"). - cups-1.6.1-revertSTR3929_to_default_IPP_1.1_again.patch reverts the incompatible change in CUPS 1.6 that makes IPP version 2.0 default (see https://www.cups.org/str.php?L3929) back to using IPP version 1.1 by default. Otherwise CUPS 1.6 on clients cannot talk to older CUPS servers in particular not to CUPS 1.3.9 on SLE11. E.g. on a CUPS 1.6 client "lpstat -h sle11.cups.server -p" would fail on the client with "lpstat: Bad Request" and the CUPS 1.3.9 server logs in /var/log/cups/error_log the lines "E ... cupsdReadClient: ... IPP Read Error!" and "D ... cupsdSendError: ... code=400 (Bad Request)". - Version upgrade to 1.6.1. CUPS 1.6 has major incompatible changes compared to CUPS 1.5. After a version upgrade to CUPS 1.6 printing in the network would no longer work as it did up to CUPS 1.5. For an overview about what is new in CUPS 1.6 see http://www.cups.org/documentation.php/doc-1.6/whatsnew.html For details regarding incompatible changes in CUPS 1.6 see https://bugzilla.novell.com/show_bug.cgi?id=735404 and follow the links therein. For details what is new in CUPS 1.6 see the CHANGES.txt file. Excerpt: * CUPS now supports color management using colord (STR #3808). * CUPS now supports Bonjour using Avahi (STR #3066). * The "brightness", "columns", "fitplot", "gamma", "hue", "natural-scaling", "penwidth", "position", "ppi", "saturation", and "scaling" options are not longer supported (STR #4010). * Added new destination connection and enumeration functions via new dynamic destination APIs (STR #3924). * Added new option, localization, and job submission functions via new APIs that do not depend on PPD files (STR #3925). * The scheduler now supports a DefaultAuthType of "auto" to automatically choose between Basic (username/password) and Negotiate (Kerberos) authentication. * CUPS no longer supports automatic remote printers or implicit classes via the CUPS, LDAP, or SLP protocols (STR #3922, STR #3923). * The PPD APIs are now deprecated and will be removed in a future version of CUPS (STR #3927). * The default IPP version for requests is now 2.0 (STR #3929). * The IPP APIs no longer expose the ipp_t or ipp_attribute_t structures and instead provide accessor functions (STR #3928). * The scheduler will no longer run programs with group write permission. * The PHP module has been removed (STR #3932). * The bannertops, commandtoescpx, commandtopclx, imagetops, imagetoraster, pdftops, rastertoescpx, rastertopclx, and texttops filters have been removed (STR #3930). * The serial and parallel backends have been removed (STR #3935). - Adapted cups-config-libs.patch for CUPS 1.6.1 (IMGLIBS is no longer present in cups-config.in). - buildrequire systemd through the pkgconfig provide to get systemd-mini in build environment (to break cycle) - Version upgrade to 1.5.4 (mainly a bugfix release) that fixes some IPP printing issues. Excerpt: * The IPP backend no longer tries to get the job status for printers that do not implement the required operation (STR #4083). * Sending a document in an unsupported format to an IPP printer now automatically cancels the job (STR #4093). * The IPP backend now treats the client-error-not-possible status code as a job history issue, allowing IPP printing to Windows to work(STR #4047). For a complete list see the CHANGES.txt file. - revert_cups-ssl.m4_to_1.5.2.patch is now obsolete because of an upstream fix. - license update: SUSE-GPL-2.0-with-openssl-exception and LGPL-2.1 Apple grant an openssl linking exception (and an exception for linking on Apple owned operating systems). - Save /etc/cups/cupsd.conf and /etc/cups/cupsd.conf.default from becoming hardlinked via the fdupes run in cups.spec (see the 'Wed Aug 26 21:43:03 CEST 2009' entry below) by making their content different and at the same time fix the misleading comment (openSUSE Bugzilla bnc#773971). - Minor clean-up in cups.spec (the "Remove unpackaged files" via "rm -rf ") is no longer needed because those man pages are no longer installed. - Upgraded to CUPS 1.5.3 (mainly a bugfix release) that fixes a number of PostScript, SSL, authenticated printing, and networking issues. Excerpt: * The scheduler could crash if a PPD file contained an invalid paper size (STR #4049). * Missing localizations caused empty output (STR #4033). * Changed how timeouts are implemented in the LPD backend (STR #4013). * The default InputSlot setting was never used (STR #3957). * Fixed the IPP backend's handling of HTTP/1.0 compatibility (STR #3988). For a complete list see the CHANGES.txt file. - revert_cups-ssl.m4_to_1.5.2.patch reverts cups-ssl.m4 to what it was in CUPS 1.5.2 so that autoconf produces a syntactically correct configure script otherwise "bash -n configure" fails with "syntax error: unexpected end of file", see http://www.cups.org/str.php?L4084 - No longer require Ghostscript but only "Recommends: ghostscript" because the Ghostscript device "cups" is needed by several CUPS filters (in particular the "rasterto..." filters) but those filters are not used on all systems (e.g. on a print server with only "raw" queues) so that a weak Recommends fits better. Furthermore this avoids a build dependency cycle between the main-packages cups and ghostscript. - No longer require /usr/bin/pdftops but only a "Recommends" because the CUPS filter /usr/lib/cups/filter/pdftops (which calls /usr/bin/pdftops) is not used on all systems (e.g. on a print server with only "raw" queues) so that a weak Recommends fits better. - In cups.spec only "Requires: ghostscript" but no longer require ghostscript-fonts-std in cups.spec because in ghostscript.spec there is already "Requires: ghostscript-fonts-std" (related to openSUSE Bugzilla bnc#735824). - In cups.spec remove the Obsoletes/Provides cups-SUSE-ppds-dat because cups-SUSE-ppds-dat.rpm existed only up to SLE10 but it does no longer exist since 11.1/SLE11 and CUPS 1.5.x is not provided for SLE10. - Use traditional bash scriptlets for post/postun with an explicite "exit 0" line at the end to be fail safe and therefore also "PreReq: /sbin/ldconfig" explicitly for the cups-libs sub-package, see the "Shared_libraries" section in http://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets - Upgraded to CUPS 1.5.2 (mainly a bugfix release). This release fixes a number of printing, encryption, and ipptool issues. Excerpt: * The scheduler incorrectly used free() on a POSIX ACL value, which could cause a crash (STR #3970). * Encryption was broken with OpenSSL (probably STR #3933 and bnc#739410 ). * Badly formed GIF files could cause the image filters to crash (STR #3914). For a complete list see the CHANGES.txt file. - Use explicit buildrequires on the needed libraries. otherwise build will fail after libtiff-devel deps cleanup - Cleanup requires of -devel package, which only needs glibc-devel - cups-config-libs.patch fixes cups-config script, which with option --libs adds: LIBS="-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lssl -lcrypto - lz -lpthread -lm -lcrypt " IMGLIBS="-ltiff -ljpeg -lpng" This only makes sense when using static linking but we do not ship static libraries and it will only bloat dependant packages. - Update systemd patch, Bind to datagram socket as well in systemd cups.socket unit file, to prevent that port being stolen by another service (from RH). - There is no need to use -fno-strict-aliasing in cflags any longer. - Update systemd patch to a newer version that uses libsystemd-daemon instead of bundling sd-daemon wrappers. - cups-0001-systemd-add-systemd-socket-activation-and-unit-files.patch adds complete systemd support, the hardware stuff is handled in builtin udev rules (see /lib/udev/rules.d/99-systemd.rules). See also http://0pointer.de/blog/projects/socket-activation2.html - Upgraded to CUPS 1.5.0 (openSUSE Bugzilla bnc#722057) Backward incompatible changes: * The main header cups/cups.h no longer includes the PPD header cups/ppd.h which may require code changes to applications. * CUPS no longer supports the old ~/.cupsrc or ~/.lpoptions files from CUPS 1.1.x. The ~/.cups/client.conf and ~/.cups/lpoptions files that were introduced in CUPS 1.2 must now be used. * The scheduler now requires that filters and backends have group write permissions disabled (security). * The HP-GL/2 filter is no longer included (STR #3322). * The SCSI backend is no longer included (STR #3500). Other changes: * Updated the PostScript filter to support IncludeFeature in more circumstances (STR #3417). * The scheduler now sets the process group for child processes and manages the group (STR #2829). * The scheduler now more carefully creates and removes configuration, cache, and state files (STR #3715). * The lpadmin command now allows default option values to be deleted (STR #2959). * Restored support for GNU TLS and OpenSSL with threading enabled (STR #3605, STR #3461). Therefore cups-1.4.4-str3461-1.4.reverted.patch is no longer needed (openSUSE Bugzilla bnc#617026). * Increased the default RIPCache value to 128MB (STR #3535). Therefore cups-1.4.4-set_default_RIPCache_128m.patch is no longer needed (openSUSE Bugzilla bnc#628233). * Updated PDF filter to support Ghostscript ps2write (STR #3766). * Updated PDF filter to support Poppler option to preserve page sizes in PDF files when the user has not selected a particular media size (STR #3689). * Added new PWG Raster filter for IPP Everywhere printer support. * Added support for a new cupsFilter2 keyword in PPD files to allow for the propagation of the actual MIME media type produced by a filter. * Name resolution errors no longer no longer cause queues to stop (STR #3719, STR #3753). See also https://bugzilla.novell.com/show_bug.cgi?id=337794#c16 * Added a new cups-exec helper program that applies security profiles to filters, port monitors, backends, CGI programs, and mini-daemons. * The web interface can now be disabled using the WebInterface directive in cupsd.conf (STR #2625). * The ipptest tool is now a first-class user program (STR #3484). For a complete list see the CHANGES.txt file. - cups-1.4.4-str3461-1.4.reverted.patch (bnc#617026) and cups-1.4.4-set_default_RIPCache_128m.patch (bnc#628233) are no longer needed because the issues are fixed upstream. cups-1.5-additional_policies.patch (fate#303515) replaces the cups-1.4-additional_policies.patch which does no longer apply. - add libtool as buildrequire to make the spec file more reliable - Reverted the change from meissner below dated "Fri Sep 23 09:54:39 CEST 2011" so that baselibs.conf again contains only one line "cups-libs" as before because the submitrequest 85423 Printing/cups -> openSUSE:Factory/cups was declined by coolo with the following reason: "cups-devel-32bit requires cups-32bit (default requires), which does not exist". - Upgraded to CUPS 1.4.8 * network backends could crash if a printer returned a value of 0 for the maximum capacity for a supply (STR #3875) * For a complete list see the CHANGES.txt file. - Upgraded to CUPS 1.4.7 * imageto* filters could crash with bad GIF files (STR #3867) * CUPS did not work with some printers that incorrectly implemented the HTTP/1.1 standard (STR #3778, STR #3791) * Fixed crash in scheduler when the application/octet-stream MIME type was not defined (STR #3690) * The web interface no longer tries to use multi-part delivery when adding printers (STR #3455) using Epiphany or IE * "lp" and "lpr" failed with Kerberos enabled (STR #3768) * Remote printer URIs with options did not work (STR #3717) * The scheduler now only looks up interface hostnames if HostNameLookups are enabled (STR #3737) * The scheduler could crash if a browsed printer times out while a job is printing (STR #3754) * For a complete list see the CHANGES.txt file. - cups-1.4.4-set_default_RIPCache_128m.patch enlarges the CUPS upstream default RIPCache from 8m to 128m to avoid various kind of printout failures (STR #3535, and Novell/openSUSE Bugzilla bnc#628233). - cups-devel baselibs package for Wine 32bit on 64bit building (added "cups-devel requires cups-libs..." to baselibs.conf). - Remove redundant tags/sections from specfile (removed "norootforbuild" and the "clean" section). - "no" locale is "nb" (norwegian bokmal) these days (move /usr/share/locale/no to /usr/share/locale/nb). - "zh" is probably meant as "zh_CN", as "zh_TW" exists (move /usr/share/locale/zh to /usr/share/locale/zh_CN). - Cleaned up the RPM Requires: Removed the needless "Suggests: poppler-tools" because there is "Requires: /usr/bin/pdftops" which should be sufficient. Replaced the RPM Requires for foomatic-filters by Recommends because foomatic-rip is only needed by CUPS in a few cases and printer driver packages which need foomatic-rip require foomatic-filters on their own. - Upgraded to CUPS 1.4.6 CUPS 1.4.6 fixes in particular a regression: * A change was made in CUPS 1.4.5's pstops filter that it did not support landscape printing of PostScript files (STR #3722) * For a complete list see the CHANGES.txt file. - Fixed coolo's quick and ditry unconditioned "PreReq: sysvinit(syslog)" stuff from below because build fails everywhere except openSUSE:Factory (i.e. openSUSE 11.4) because sysvinit(syslog) is nowhere else provided. Now the PreReq is only if suse_version > 1130. - prereq init script syslog - Upgraded to CUPS 1.4.5 CUPS 1.4.5 fixes several scheduler and printing bugs as well as a reported security bug, in particular: * Fixed a IPP parsing memory corruption bug (CVE-2010-2941, STR #3648, Novell/Suse Bugzilla bnc#649256) * Fixed a PPD loader bug that could crash the cupsd (STR #3680) * The scheduler restarts jobs while shutting down (STR #3679) * Did not initialize Kerberos in all cases (STR #3662) * The socket backend could go into an infinite loop with certain printers (STR #3622) * Moving a job via the web interface failed without asking for authentication (STR #3559) * The web interface did not allow a user to change the driver (STR #3537, STR #3601) * For a complete list see the CHANGES.txt file. - Fixed /etc/init.d/cups (cups.init source file) so that stopping the cupsd waits up to 10 seconds until the cupsd had actually finished (if not SIGKILL would be sent to it) to make sure that "rccups restart" and "rccups stop ; rccups start" work correctly (see Novell/Suse Bugzilla bnc#622058). - cups-1.4.4-str3461-1.4.reverted.patch reverts changes by CUPS STR #3461 as band-aid workaround for now to avoid that Mozilla.org applications crash when they try to print (STR #3461, STR #3605, and Novell/Suse Bugzilla bnc#617026). - Upgraded to CUPS 1.4.4 CUPS 1.4.4 fixes several security, scheduler, printing, and conformance issues, in particular: * The web interface now includes additional CSRF protection (CVE-2010-0540, STR #3498, STR #3593, and Novell/Suse Bugzilla bnc#601830) * The texttops filter did not check the results of allocations (CVE-2010-0542, STR #3516, Novell/Suse Bugzilla bnc#601352) * The web admin interface could disclose the contents of memory (CVE-2010-1748, STR #3577, Novell/Suse Bugzilla bnc#604271) * The fix for CVE-2009-3553 (STR #3200) was incomplete for systems that use kqueue or epoll (STR #3490) * CUPS could overwrite files as root in directories owned or writable by non-root users (STR #3510) * The OpenSSL interfaces have been made thread-safe and the GNU TLS interface is explicitly forbidden when threading is enabled (STR #3461) * The scheduler could crash on restart if classes were defined (STR #3524) * The socket backend no longer waits for back-channel data on platforms other than Mac OS X (STR #3495) * For a complete list see the CHANGES.txt file. - Update cups-1.3.9-desktop_file.patch: add the Settings category (required since we use HardwareSettigns) and add NotShowIn=GNOME: in GNOME, the configuration tool we want to use is system-config-printer. - Explicitly set configure option '--enable-debug' because otherwise the cups-debuginfo RPM would be empty. - Removed no longer recognized configure option '--enable-pie' (it compiles and links with '-pie -fPIE -fPIC' by default). - Disabled .SILENT in Makedefs.in so that make is verbose as usual. - In cups.spec removed '-r' from the suse_update_desktop_file call to not replace valid (and previously patched via cups-1.3.9-desktop_file.patch) categories of the desktop file so that it shows up in the right place (this is particularly an issue with the LXDE/XFCE menu). - cups-1.4.3-default-webcontent-path.patch changes the default path whereto the web content is installed from /usr/share/doc/... to /usr/share/cups/webcontent because the files of the CUPS web content are no documentation (see CUPS STR #3578 and Novell/Suse Bugzilla bnc#546023 starting at comment#6). - In cups.spec replaced usage of the RPM macro 'name' by the explicite value 'cups' (except for the BuildRoot) so that CUPS could be built as well with a different package name (e.g. when someone likes to provide a CUPS SVN revision as 'cupsSVN' or a specifically adapted CUPS as 'cups4me'). - cups-krb5-config wrapper script for krb5-config is no longer needed because since April 2008 krb5-config works correctly (see Novell/Suse Bugzilla bnc#378270 and compare STR #3556). - In cups.xinetd replaced '@LIB@' by '/usr/lib' and removed the perl substitute calls regarding '@LIB@' in cups.spec because since the upstream compliant CUPS 1.4 it is '/usr/lib/cups/' on all platforms (see Novell/Suse Bugzilla bnc#575544). - Upgraded to CUPS 1.4.3: * The scheduler could try responding on a closed client connection, leading to a crash (CVE-2009-3553, STR #3200, and bnc#554861). * The lppasswd program allowed the localization files to be overridden when running in setuid mode (CVE-2010-0393, STR #3482, and bnc#574336). * The scheduler would crash when an active printer was deleted. * The DBUS notifier did not build (STR #3447). * The scheduler did not reset the SIGPIPE handler of child processes (STR #3399). * For a complete list see the CHANGES.txt file. - cups-1.3.9-CVE-2009-3553.patch has become obsolete because it is fixed in the source. - CUPS 1.3 -> 1.4 version upgrade and major cleanup: For the CUPS upstream changes see the CHANGES.txt file. Such a major version upgrade is the perfect chance to drop almost all our own patches to enforce a reset to almost 100% compliance with upstream. Here our openSUSE CUPS versions and their number of patches (i.e. the "Patch" entries in the cups.spec files): CUPS version 1.2.12 in openSUSE 10.3: 37 CUPS version 1.3.7 in openSUSE 11.0: 29 CUPS version 1.3.9 in openSUSE 11.1: 26 CUPS version 1.3.11 in openSUSE 11.2: 17 Of course this includes patches with backported bug fixes via our maintenance but nevertheless there were really too much openSUSE specific patches. Therefore I would like to provide CUPS 1.4 "as is" to the furthest possible extent (there are still 6 patches left). Then let's see if we get bug reports because of this. I did such a reset to 100% compliance with upstream already in the past for sane-backends and guess what: I got no single bug report at all because of this. I guess what they do at upstream is actually not so bad ;-) - Added the explicite path to '--with-cachedir=/var/cache/cups' in cups.spec to avoid that the fallback value 'yes' results the cache directory '/etc/cups/yes/'. - cups-1.3.11-CVE-2009-2820-regression-fix.patch and cups-1.3.11-CVE-2009-2820.patch have become obsolete because it is fixed in the source. - cups-1.4-full_path_to_configure_with-pdftops.patch has become obsolete because it is fixed in the source. - add baselibs.conf as a source - enable parallel building - Fixed the URL and MD5 sum comments for Source0 in cups.spec. - cups-1.3.9-CVE-2009-3553.patch fixes a use-after-free bug in the scheduler which leads to remote denial of service, (CVE-2009-3553, CUPS STR #3200, and Novell/Suse Bugzilla bnc#554861) - cups-1.3.11-CVE-2009-2820-regression-fix.patch fixes a regression which was introduced by the previous cups-1.3.11-CVE-2009-2820.patch which lets adding a class via CUPS Web Interface fail with an 'Unknown operation "{op}"' error message (CUPS STR #3401 and Novell/Suse Bugzilla bnc#548317 starting at comment #24). - cups-1.3.11-CVE-2009-2820.patch fixes CUPS Web Interface Cross-Site Scripting (XSS) and CRLF injection in HTTP headers (CVE-2009-2820 and CUPS STR #3367 and Novell/Suse Bugzilla bnc#548317). - updated patches to apply with fuzz=0 - Fixed as-needed issues when compiling additional tools by using the right ordering of source and linked library in 'gcc -opoll_ppd_base ... SOURCE1 -lcups' and 'gcc -olphelp ... SOURCE2 -lcups' which obsoletes the 'export SUSE_ASNEEDED=0' workaround, see the 'Fri Jul 10 12:34:54 CEST 2009' entry below. - Run fdupes. - full_path_to_configure_with-pdftops.patch adds support to specify a full path in 'configure --with-pdftops=/usr/bin/pdftops' to avoid 'BuildRequires: xpdf-tools' which would bloat the build system but would be only needed to satisfy 'AC_PATH_PROG(CUPS_PDFTOPS, pdftops)' in cups-pdf.m4 if only 'configure --with-pdftops=pdftops' was possible (Novell/Suse Bugzilla bnc#526847). - Upgraded to CUPS 1.3.11: * The scheduler and cupsfilter utility would crash with certain MIME .types rules (CUPS STR #3159). * cups-1.3.10-fix-DNS-rebinding-protection.patch (Novell/Suse Bugzilla bnc#516511 and CUPS STR #3238) is obsolete since CUPS 1.3.11 because it is fixed in the source (it is fixed via CUPS STR #3164). * For a complete list see the CHANGES.txt file. - Set 'export SUSE_ASNEEDED=0' in cups.spec because build fails with --as-needed so that this is for now simply disabled. - cups-1.3.10-fix-DNS-rebinding-protection.patch fixes a regression of the CUPS 1.3.10 DNS rebinding protection which lets e.g. "lpoptions -h localhost -p -l" fail with "lpoptions: Unable to get PPD file for : Bad Request" and in /var/log/cups/error_log there is the warning W ... Request from "localhost" using invalid Host: field "::1" but "::1" is the IPv6 loopback IP address for "localhost" (Novell/Suse Bugzilla bnc#489624 comment#19 and bnc#516511). - Upgraded to CUPS 1.3.10: * Use a wrapper program filter/pdftops.c which only calls /usr/bin/pdftops (via configure --with-pdftops=/usr/bin/pdftops) instead of the CUPS fork of the Xpdf source code which was in the pdftops directory (CUPS STR #3129). Because of this cups-1.4svn-pdftops_as_filter.patch and cups-1.4svn-pdftops_dont_fail_on_cancel.patch are obsolete since CUPS 1.3.10 (the latter was fixed via CUPS STR #2808). * The scheduler now protects against DNS rebinding attacks (CUPS STR #3118 and Novell/Suse Bugzilla bnc#489624). * cups-1.3.9-cupstestppd.patch is obsolete since CUPS 1.3.10 because it is fixed in the source (CUPS STR #2979). * cups-1.3.9-max_subscription.patch is obsolete since CUPS 1.3.10 because it is fixed in the source (no CUPS STR but mentioned in CHANGES.txt "The scheduler would crash if you exceeded the MaxSubscriptions limit"). * cups-1.3.9-filter_png_overflow2.patch is obsolete since CUPS 1.3.10 because it is fixed in the source (CUPS STR #2974 and Novell/Suse Bugzilla bnc#448631). * cups-1.3.9-hpgltops2.patch is obsolete since CUPS 1.3.10 because it is fixed in the source (CUPS STR #2966 which is the successor of CUPS STR #2911 and Novell/Suse Bugzilla bnc#430543). * cups-1.3.9-cupsImageReadTiff.patch is obsolete since CUPS 1.3.10 because it is fixed in the source (CUPS STR #3031 and Novell/Suse Bugzilla bnc#485895). * For a complete list see the CHANGES.txt file. - cups-1.1.21rc2-preauth_security.patch and cups-1.1.21rc2-usermode.patch and cups-1.1.21-umlaut_printer.patch and cups-1.1.23-testpage.patch are finally removed since CUPS 1.3.10 because they were made for CUPS 1.1 and were no longer applied since CUPS 1.2 in Suse Linux 10.3. In particular cups-1.1.21rc2-usermode.patch can no longer apply since CUPS 1.2 because RunAsUser in cupsd.conf is no longer supported since CUPS 1.2, for more info see e.g. the "RunAsUser removed; reassurance wanted" mails on cups@easysw.com. Furthermore we neither got any Suse Linux/openSUSE user request nor any SLE11 beta-tester/customer request for them. - Replaced "--enable-static" by "--disable-static" in configure so that the static libraries /usr/lib[64]/libcups.a and /usr/lib[64]/libcupsimage.a are no longer built and included in the cups-devel package to enforce detection of other software which might be built with static CUPS libraries so that those other software could be fixed to use the dynamic libraries (see also Novell/Suse Bugzilla bnc#509945). - Set BROADCAST="ipp" in cups.SuSEfirewall2 source file (which gets installed as /etc/sysconfig/SuSEfirewall2.d/services/cups) so that adding "cups" to allowed services in the firewall also allows CUPS Browsing information via UDP broadcasts (Novell/Suse Bugzilla bnc#498429). - cups-1.3.9-cupsImageReadTiff.patch fixes an integer overflow in the "_cupsImageReadTIFF()" function CVE-2009-0163 (CUPS STR #3031 and Novell/Suse Bugzilla bnc#485895). - added directory %{libdir}/cups/driver to %files of cups (bnc#465794) - obsolete old cups-libs-XXbit and cups-devel-XXbit correctly - use Obsoletes: -XXbit only for ppc64 to help solver during distupgrade (bnc#437293) - fixed permission of snmp.conf (bnc#449570) - fix for png size validation CVE-2008-??? (bnc#448631) - correction for hpgl pen selection fix CVE-2008-3641 (bnc#430543) - fixed rss subscription issue (bnc#446975) - missed to fix a further PPD file: stcolor2.ppd - Obsoletes: cups-SUSE-ppds-dat (bnc#438763) - obsolete old -XXbit packages (bnc#437293) - fixed issues in PPD files: failing through internal tests - update to 1.3.9, which is mainly a bugfix version. For a complete list see included CHANGES.txt file, but important changes were already included via patches before. Deleted patches: cups-1.3.8-custom_ppd_fix.patch (CUPS STR #2889) cups-1.3.8-ssl_firefox.patch (CUPS STR #2892) cups-1.3.8-cupsfilter_path.patch (CUPS STR #2908) cups-1.3.8-pjl_ready_message.patch (CUPS STR #2909) cups-1.3.8-listener_compare.patch (CUPS STR #2910) cups-1.3.8-manyjob_finish.patch (CUPS STR #2913) cups-1.3.8-resolver_reinit.patch (CUPS STR #2920) cups-1.3.8-startstop_msg.patch (CUPS STR #2927) cups-1.3.8-noclobber_symlink.patch (CUPS STR #2937) cups-1.3.8-more_debuginfo.patch (CUPS STR #2943) cups-1.3.8-hostlookup.patch (CUPS STR #2946) cups-1.3.8-ipp_stop_after_pause.patch cups-1.3.8-lose_printers_on_allowed_users.patch Updated patches: cups-1.2.5-desktop_file.patch - bugfixes: * printer stops after IPP pause * pritners got lost when users are set in Set Allowed Users Dialog - added und integrated latest patches from upstream bugzilla: cups-1.3.8-custom_ppd_fix.patch (CUPS STR #2889) cups-1.3.8-ssl_firefox.patch (CUPS STR #2892) cups-1.3.8-cupsfilter_path.patch (CUPS STR #2908) cups-1.3.8-pjl_ready_message.patch (CUPS STR #2909) cups-1.3.8-listener_compare.patch (CUPS STR #2910) cups-1.3.8-manyjob_finish.patch (CUPS STR #2913) cups-1.3.8-resolver_reinit.patch (CUPS STR #2920) cups-1.3.8-startstop_msg.patch (CUPS STR #2927) cups-1.3.8-noclobber_symlink.patch (CUPS STR #2937) cups-1.3.8-more_debuginfo.patch (CUPS STR #2943) cups-1.3.8-hostlookup.patch (CUPS STR #2946) - removed hplip in init script: hplip is no more (bnc#390663) - beautified $BUILD_DISTRIBUTION_NAME setting - Remove -p from fillups call. - update to version 1.3.8: * bugfix version, which includes CVE-2008-1722 * also includes some performance changes * refer to included CHANGES.txt file for full information - removed obsolete patches - removed deprecated use of %run_ldconfig - added avahi-compat-mDNSResponder-devel to BuildRequieres (bnc#398700) - fixed typo in Policy "easy" - added two additional policies to cupsd.conf (fate#303515) - fixed abuild failure: ownership of lppasswd - fix directory/setgid permissions for lppasswd use (bnc#404142) - crash on startup when BrowseAddress has no value (bnc#396969) - added pdftops_any for 11.0 to Requires: (bugzilla#378434) - renamed use of CUPS_PDFTOPS to HAVE_PDFTOPS in pdftops.c, to avoid execute of gs (bnc#390435) - removed earlykdm from init script, due to new less CPU consuming start of daemon now (bnc#388007) - merged both pdftops patches to one - removed "recommended" remover (bnc#387267) - new version of pdftops filter from svn extracted - changed the perror() calls in pdftops.c for cups-1.3.x compatibility - fixed the ghostscript call via new variable (unnecessary -> removed) - grabbed and applied the wait() fix for childs from cups STR - fix for integer overflow in png filter CVE-2008-1722 (bugzilla#378335) - not affected: CVE-2008-1693 (bugzilla#377872) - added /usr/bin/pdftops to Requires:, and poppler-tools to Suggests: - explicitly specify pdftops binary for configure to avoid adding buildrequires just for a binary path - take out poppler for now to break the cycle, Klaus will fix correctly later - changes for PDF.ppd - added baselibs.conf file to build xxbit packages for multilib support - pdftops uses now system command e.g. xpdf-tools (as in cups-1.4svn) - due to requests: client.conf is back in /etc/cups - fix for buildsystem: added wrapper script for krb5-config as the original output shows $CFLAGS $LIBDIR of cups.spec and rpath flags (bugzilla#378270) - added missing directory /var/cache/cups to %files - added pstopdf filter (from cups-mailto project at sourceforge.net) - enabled krb5 support on request (bugzilla#377645) - enabled further configure options: gcc's relro, gssapi - and for run of cupsd: java, php, python (needs further activation) - update to version 1.3.7: bugfix version only, includes CVE-2008-0047 and CVE-2008-1373. Refer to included CHANGES.txt file for full information - worked on INFO in init file - removed references to version SUSE 8.01 in specfile - fixed issue in cgi-bin search CVE-2008-0047 (bugzilla#367225) - update to version 1.3.6: * Documentation updates * Fixed a problem with the web interface "Use Kerberos Authentication" check box * The scheduler unconditionally overwrote the printer-state- message with "process-name failed" when a filter or backend failed, preventing a useful error message from being shown to the user. * Policies on CUPS-Move-Job didn't work as expected * The configure script only supported D-BUS on Linux * The scheduler did not support * The scheduler did not reset the job-hold-until attribute after a job's hold time was reached. * The scheduler did not support printer supply attributes * The Kerberos credentials provided by some Windows KDCs were still too large - now use a dynamic buffer to support credentials up to 64k in size * Printing a test page from the web interface incorrectly defaulted to the "guest" user * The cupsEncodeOptions2() function did not parse multiple- value attribute values properly * The scheduler incorrectly sent printer-stopped events for status updates from the print filters * The IPP backend could crash when handling printer errors * Multi-file jobs did not print to remote CUPS servers * The scheduler did not provide the Apple language ID to job filters. * Kerberos authentication did not work with the web interface * The requesing-user-name-allowed and -denied functionality did not work for Kerberos-authenticated usernames * CUPS didn't compile on HP-UX 11i * cupsEncodeOptions2() did not handle option values like "What's up, doc?" properly. * Added lots of memory allocation checks (Fortify) * The scheduler would crash if it was unable to add a job file (Fortify) * ppdOpen*() did not check all memory allocations (Coverity) * ippReadIO() did not check all memory allocations (Coverity) * The PostScript filter did not detect read errors (Coverity) * The scheduler did not check for a missing job-sheets-completed attribute when sending an event notification (Coverity) * "Set Printer Options" might not work with raw queues (Coverity) * cupsRasterInterpretPPD() could crash on certain PostScript errors (Coverity) * The USB backend did not check for back-channel support properly on all systems (Coverity) * Fixed memory leaks in the GIF and PNM image loading code (Coverity) * Removed some dead code in the CUPS API and scheduler (Coverity) * Fixed two overflow bugs in the HP-GL/2 filter (Coverity) * Fixed another ASN1 string parsing bug * The RSS notifier directory was not installed with the correct permissions. * The standard CUPS backends could use 100% CPU while waiting for print data * Filename-based MIME rules did not work * The cups-polld program did not exit if the scheduler crashed * The scheduler would crash if you tried to set the port-monitor on a raw queue * The scheduler could crash if a polled remote printer was converted to a class * The web interface and cupsctl did not correctly reflect the "allow printing from the Internet" state * The scheduler incorrectly treated MIME types as case- sensitive * The Java support classes did not send UTF-8 strings to the scheduler * The CGI code did not handle interrupted POST requests properly * The PostScript filter incorrectly handled number-up when the number of pages was evenly divisible by the number-up value. * The PDF filter incorrectly filtered pages when page-ranges and number-up were both specified * The IPP backend did not handle printing of pictwps files to a non-Mac CUPS server properly. * The scheduler did not detect network interface changes on operating systems other than Mac OS X * The scheduler now logs the UNIX error message when it is unable to create a request file such as a print job. * Added support for --enable-pie on Mac OS X. - adapted access_conf.patch to 1.3.6 - changed permissions in %files according to cups (bugzilla#342772) - update to version 1.3.5: * The SNMP backend did not check for negative string lengths * The scheduler incorrectly removed auth-info attributes, potentially leading to a loss of all options for a job. * The scheduler stopped sending CUPS browse packets on a restart when using fixed addresses * Fixed PDF filter security issues (CVE-2007-4352 CVE-2007-5392 CVE-2007-5393) * Changing settings would always change the DefaultAuthType and Allow lines * The scheduler would crash when submitting an undefined format file from Samba with LogLevel debug2 * The scheduler did not use poll() when epoll() was not supported by the running kernel * Fixed a compile problem with Heimdal Kerberos * The USB backend now retries connections to a printer indefinitely rather than stopping the queue. * Printers with untranslated JCL options were not exported to Samba correctly * The USB backend did not work with some Minolta USB printers * The strcasecmp() emulation code did not compile * The scheduler would crash if a job was sent to an empty class * The lpc command did not work in non-UTF-8 locales * Subscriptions for printer-stopped events also received other state changes * cupstestppd incorrectly reported translation errors for the "en" locale. * ppdOpen() did not handle custom options properly when the Custom attribute appeared before the OpenUI for that option. * The scheduler could crash when deleting a printer or listing old jobs. * The Mac OS X USB backend did not allow for requeuing of jobs submitted to a class. * lpmove didn't accept a job ID by itself. * The scheduler incorrectly removed job history information for remote print jobs. * The scheduler incorrectly sent the "com.apple.printerListChanged" message for printer state changes. * The PostScript filter drew the page borders (when enabled) outside the imageable area. * The LPD and IPP backends did not default to the correct port numbers when using alternate scheme names. * The scheduler incorrectly deleted hardwired remote printers on system sleep. * The scheduler would abort if a bad browse protocol name was listed in the cupsd.conf file. * The online cupsd.conf help file incorrectly showed "dns-sd" instead of "dnssd" for Bonjour sharing. * The scheduler could crash changing the port-monitor value. * The scheduler generated CoreFoundation errors when run as a background process. * When printing with number-up > 1, it was possible to get an extra blank page. - removed CVE patches, which are already applied upstream - Add dbus-1-devel to the BuildRequires. - Add the --enable-dbus flag to the configure line to send DBUS signals out for queue change events. This helps fix 345163. - upgrade to version 1.3.4: * Documentation updates * CUPS now maps the "nb" locale to "no" on all platforms * CUPS did not work with a Windows 2003 R2 KDC * ippReadIO() could read past the end of a buffer * The scheduler would crash on shutdown if it was unable to create a Kerberos context. * Multiple AuthTypes in cupsd.conf did not work * The snmp.conf file referenced the wrong man page * The cupsaddsmb program didn't handle domain sockets properly * The scheduler now validates device URIs when adding printers. * Updated httpSeparateURI() to support hostnames with the backslash character. * Updated the Japanese localization * The parallel backend now gets the current IEEE-1284 device ID string on Linux * The IPP backend now checks the job status at variable intervals (from 1 to 10 seconds) instead of every 10 seconds for faster remote printing * "lpr -p" and "lpr -l" did not work * Compilation failed when a previous version of CUPS was installed and was included in the SSL include path * The scheduler did not reject requests with charsets other than US-ASCII or UTF-8, and the CUPS API incorrectly passed the locale charset to the scheduler instead of UTF-8 * cups-deviced did not filter out duplicate devices. * The AppleTalk backend incorrectly added a scheme listing when AppleTalk was disabled or no printers were found. * The PostScript filter generated N^2 copies when the printer supported collated copies and user requested reverse-order output. * The scheduler did not reprint all of the files in a job that was held. * The scheduler did not update the printcap file after removing stale remote queues. * The cupsd.conf man page incorrectly referenced "AuthType Kerberos" instead of "AuthType Negotiate". - fixes for xpdf CVE-2007-4352, CVE-2007-5393, CVE-2007-5392 (bugzilla#335637) - fix for IPP boundaries swamp-14294, CVE-2007-4351 (bugzilla#335635) - upgrade to version 1.3.3. Main features to 1.2.x: * Networking * Kerberos: CUPS now supports Kerberos authentication * Mac OS X Authorization Services: CUPS now supports the Authorization Services framework, providing role-based access control in addition to the tradition UNIX model * Peer Credentials: CUPS now supports authentication using peer credentials provided over UNiX domain sockets * SNMP Support: SNMP lookups are no longer performed by default, and IPP is no longer used for discovered printers * LPD Support; The LPD backend now supports a faster streaming mode that does not require a temporary file * Browsing * CUPS Browsing: The default configuration now shows shared printers from any address (not just @LOCAL) * DNS-SD (Bonjour/Zeroconf) Support: CUPS now supports printer sharing via DNS service discovery * LDAP w/SSL: CUPS now supports encrypted LDAP sessions * Web Interface * Internet Printer Sharing: You can now share printers over the Internet via the basic server settings * Improved On-Line Help: Searching the on-line help now shows results for all text, not just headings and links * Printer Setup: The available printer list is now only show when requested and the Add This Printer button now allows you to change the default name, location, and description * Printer Configuration: Raw printers and classes can now be configured using the Set Printer Options button * IPP Support * Job Printer Attributes: CUPS now provides job-printer-state-message and job-printer-state-reasons attributes containing copies of the corresponding printer attributes to provide important history information with each job * PPD Operations and Attributes: The new CUPS_GET_PPD operation allows you to retrieve PPD files from the scheduler; also, CUPS_GET_PPDS now reports more information and supports more value filters * Printer Defaults: The document-forma-default, notify-events-default, and notify-lease-duration-default attributes can be set for each printer and class * PWG Printer Alert Support: CUPS now supports the printer-alert and printer-alert-description attributes * Server-Side Options: Server-side default options can now be retrieved using the "printer-defaults" group keyword * Scheduler * Client Support: The scheduler now uses poll(), epoll(), or /dev/kqueue on platforms that provide them to support large numbers of clients * "Default" Authentication: You can now specify an AuthType of Default in locations and policies, which maps to the DefaultAuthType value * Larger Numbers of Clients: The scheduler now uses poll(), epoll(), or /dev/kqueue instead of select() when possible * New cupsctl Command: The new cupsctl command allows you to perform basic server configuration from the command-line * Printer Drivers * cupstestppd Improvements: The test utility now provides more extensive tests and options * Label Printer Driver: Added support for the Intellibar label printers * Localized Printer Drivers: The CUPS sample drivers are now localized in several languages * PJL Support: New cupsPJLCharset attribute controls character set for PJL strings * Pre-Filter Support: Drivers can now register format-specific filters to pre-screen print jobs * Side-Channel API; This new API provides out-of-band control of devices * CUPS API * Administration API: New cupsAdminGetServerSettings() and cupsAdminSetServerSettings() functions * Array API: New cupsArrayGetIndex(), cupsArrayGetInsert(), and cupsArrayNew2() functions * Destination API: New cupsRemoveDest() and cupsSetDefaultDest() functions * HTTP API: The http_t structure is now completely private * PPD API: New ppdLocalizeIPPReason()function and greatly improved ppdConflicts() performance - added new files, adapted patches, and removed already included ones - fix for missing newline before EOF in compressed files (bugzilla#309823) - fix for exitcode on uiconstraints in cupstestppd (bugzilla#309822) - patch: "None" needs to be valid value for cupstestppd (bugzilla#309219) - fix for xpdf bugzilla#291690, CVE-2007-3387, swamp-11865 - upgrade to cups-1.2.12: * The PHP cups_print_file() function crashed if the options array contained non-string option values * The image/tiff file matching rule incorrectly identified some text files as TIFF files * The filter(7) man page incorrectly documented the "PAGE: total [#]-pages" message * PCL text files were mis-identified as HP-GL/2 and caused the HP-GL/2 filter to hang * When printing to a queue with user ACLs, the scheduler incorrectly returned a quota error instead of a "not allowed to print" error * cupsaddsmb could get in a loop if no printer drivers were installed * cupsRasterReadHeader() did not byte-swap the header properly when compiled with certain versions of GCC. * The IPP backend did not send the document-format attribute for filtered jobs * Some PPD files could cause a crash in ppdOpen2 * The web admin interface incorrectly handled the "share printers" and "show remote printers" settings * The scheduler's log messages about AuthClass and AuthGroupName advised using a replacement directive but had the wrong syntax * Updated the PostScript/PJL and HP-GL/2 MIME rules to look in the first 4k of the file, not just the first 1k * Updated the Italian localization - updated the mime and the psrewrite patch - added quosnmp script to %doc - removed rccupsrenice: cups-1.2.x does no longer traversing of filesystem during startup. reason no longer present. - fixed as many rpmlint errors as possible - Upgrade to cups-1.2.11: * "make distclean" didn't remove all generated files * Fixed a bug in the advertisement of classes * The IPP backend now stays running until the job is actually printed by the remote server; previously it would stop monitoring the job if it was held or temporarily stopped * PDF files were not always printed using the correct orientation * The scheduler could crash if you specified a bad file: URI for a printer * The Renew-Subscription operation now returns the notify-lease-duration value that was used * The IPP backend sent job options to IPP printers, however some printers tried to override the options embedded in the PS/PCL stream with those job options * ppdLocalize() now also tries a country-specific localization for when localizing to a generic locale name. * The cupstestppd program now allows for partial localizations to reduce the size of universal PPD files. * Chinese PPD files were incorrectly tagged with the "cn" locale (should have been "zh") * The backends now manage the printer-state-reasons attribute more accurately * Java, PHP, Perl, and Python scripts did not work properly * The scheduler would take forever to start if the maximum number of file descriptors was set to "unlimited" * The page-ranges option was incorrectly applied to the banner pages * Fixed some GCC compile warnings * The DBUS notification code was broken for older versions of DBUS * The IPv6 code did not compile on HP-UX 11.23 * PPD constraints did not work properly with custom options. * Regular PPD options with the name "CustomFoo" did not work. * The USB backend did not work on NetBSD * The printer-state-reasons attribute was incorrectly cleared after a job completed * The scheduler did not set the printer operation policy on startup, only on soft reload * The AP_FIRSTPAGE_InputSlot option did not clear any ManualFeed setting that was made, which caused problems with some PPD files * cupsDoFileRequest() and cupsDoRequest() did not abort when getting an error in the response * The scheduler did not schedule jobs properly to remote or nested classes * Updated the mime.types and mime.convs headers to warn that the files are overwritten when CUPS is installed. Local changes should go in local.types or local.convs, respectively * The scheduler could get in an infinite loop if a printer in an implicit class disappeared * The pstops filter did not handle %%EndFeature comments properly * Fixed a problem with the Polish web page printer icons * ppdLocalize() now also localizes the cupsICCProfile attributes. * The scheduler still had a reference to the incorrect "notify-recipient" attribute * The "make check" and "make test" subscription tests did not set the locale * The "make check" and "make test" subscription tests incorrectly used the notify-recipient attribute instead of notify-recipient-uri * cupsRasterInterpretPPD() incorrectly limited the cupsBorderlessScalingFactor when specified in the job options. - adapted cupstestppd patch - added SuSEfirewall2 rules (bugzilla#247746) - Upgrade to cups-1.2.10: * ppdLocalize() now supports localizing for Japanese using the "jp" locale name used by the ppdmerge program from the CUPS DDK 1.1.0 * _cupsAdminSetServerSettings() did not support changing of top-level directives as designed. * The init script path check was broken. * CUPS incorrectly used the attribute "notify-recipient" instead of "notify-recicpient-uri" in several places * Fixed a configure script bug on MirBSD * The pdftops filter did not limit the amount of recursion of page sets * Custom page sizes with fractional point sizes did not work * The lpoptions command would crash when adding or removing options on a system with no printers * The scheduler did not use the default job-sheets (banners) for implicit classes * The scheduler could crash when listing complete jobs that had been unloaded from memory * The French localization was doubled up * Build system fixes for several platforms * The scheduler's openssl certificate generation code was broken on some platforms * The scheduler's log rotation check for devices was broken * The LPD mini-daemon did not handle the document-format option correctly * The pdftops filter ignored the "match" size option in the pdftops.conf file * cupstestppd now validates UTF-8 text strings in globalized PPD files * The outputorder=reverse option did not work with all printers * Classes containing other classes did not always work * Printer location and description information was lost if the corresponding string contained the "#" character * cupsRemoveOption() did not work properly * The USB backend did not work with some USB to parallel cables on Mac OS X. * The test page did not print the rulers properly on large media sizes * The text filter could crash when pretty printing certain types of files - removed already included security patch xpdf_CVE_2007_0104 - Upgrade to cups-1.2.8: * Documentation fixes * The HTTP upgrade redirection used by the scheduler did not work with Internet Explorer * Members of a class with Unicode names did not appear correctly in the web interface * Changing the "Save debugging information" setting in the web interface no longer affects the other server settings * The scheduler did not choose SSL certificates correctly on Mac OS X * The scheduler could get in an infinite loop when printing to a remote class * The jobs web page did not have separating space after the number of pages column * Added French localization * Updated Spanish localization * Updated Japanese localization * cupsBorderlessScalingFacter was limited to a range of 0.9 to 1.1, but some printers need larger values * Landscape printing of PDF files did not always work * Fixed slow USB printing on Minolta printers * The ZPL label printer driver could produce stretched output * The IPP backend now clears the printer-state-message when there are no outstanding errors or warnings * The CUPS Java scripting support did not work with recent versions of Java due to the use of Sun's private Base64 class * The scheduler did not pass HTTP GET form variables to custom CGI programs * The lpoptions command now displays the reason why a PPD file cannot be found * The scheduler did not accept "none" as a browse protocol name * The scheduler still loaded the remote printer cache, even when browsing was disabled * The SNMP backend now shows OfficeJet printers with the "HP" manufacturer prefix * Web interface HTML cleanup * The parallel backend consumed 100% CPU on FreeBSD due to an apparently common parallel port driver bug * ippReadIO() incorrectly returned IPP_IDLE when the initial IPP message header could not be read * cupsRasterInterpretPPD() did not support custom options * Collated output produced by the PostScript filter could lose some options * job-hold-until with time values for the next day would be held for 60 days * Some types of Sun raster files did not print correctly * Raw PBM files did not print correctly * The SNMP backend no longer uses IPP with HP printers, as some recent firmware versions appear to not work * cupsMarkOptions() did not handle the multiple-document-handling option * lpstat did not show the local job ID of active printers * The backends incorrectly used STATUS: media-tray-empty-error messages for out-of-paper conditions * cupsGetPPD2() returned the wrong error when the PPD file did not exist * cupsDoAuthentication() did not translate the password prompt * httpGetLength2() did not handle error messages without content correctly * Added support for 32/64-bit libraries on HP-UX Itanium systems * Fixed a configure script problem with the 32/64-bit library support * The PostScript filter did not properly output document setup commands for reversed output * The scheduler did not parse IPv6 netmasks properly - removed backported, unnecessary patches - fixed tcp_wrapper warnings (bugzilla#230730) - fixed ps interpretation (bugzilla#242042) - backported fixes from various issues, only in svn avail atm - enabled LDAP on request (bugzilla#223007), no build cycle present - fix for xpdf bugzilla#233113, CVE-2007-0104, swamp-7887 - added Required-Start: to rccupsrenice (bugzilla#231675) - Fixed devel dependencies. - removed broken locale patch: PS generation fails (bugzilla#227205) - Upgrade to 1.2.7 (another bugfix version): * Documentation updates * The PostScript filter now rotates the bounding box values as needed * The scheduler no longer loads the remote printer cache when browsing is disabled * The scheduler no longer writes a new launchd configuration file if it doesn't have to * The scheduler now picks up on changes to IPv6 and DNS configuration * The lpstat program could still hang * Fixed an inefficiency in the SNMP IPP detection code * The SSL negotiation code did not implement short timeouts - fixed non conform PPD values in PSLEVEL*.PPD (bugzilla#219779) - fixed perm problem of /etc/cups regarding lppasswd (bugzilla#218745) - Upgrade to 1.2.6 (bugfix version): * "lpc status" did not show the number of queued jobs for disabled queues * The lpstat program could hang * The serial backend did not support the new USB serial filenames on Linux * The parallel backend did not support bidirectional I/O properly * The network backends now log the numeric address that is being used * Fixed a compile error when using libpaper * Fixed a compile error when compiling on Solaris with threading enabled * Missing printer-state-changed event for printer-state-message updates - coolo's patch seems not to work, now using desktop-launch (bugzilla#207915) - fixed cups.desktop file (bugzilla#207915) - suse_update_desktop_file produces strange results in my xterm. redirecting output to /dev/null - removed duplicate entry in %files: %{_libdir}/cups/monitor/* - Upgrade to 1.2.5: * Documentation updates * The SNMP backend no longer uses IPP for Epson printers * Updated the configure script for Tru64 UNIX 5.1 * Tru64 5.1B's getaddrinfo() and getnameinfo() functions leak file descriptors * cupsAddDest() didn't add the parent destination's options and attributes. * ppdConflicts() did not handle custom option constraints. * Raw printing of gzip'd files did not work * The scheduler no longer preserves default option choices when the new PPD no longer provides the old default choice * The Linux SCSI backend is now only built if the SCSI development headers are installed. * USB printing to Minolta printers did not work * Windows clients could not monitor the queue status * The scheduler didn't log the operation name in the access_log file for Create*Job and Print-Job requests. * The PostScript filter now separates collated copies with any required JCL commands so that JCL*based finishing options act on the individual copies and not all of the copies as a single document. * The PostScript filter now disables duplex printing when printing a 1*page document. * cups-lpd didn't pass the correct job-originating-host-name value * Fixed some speling errors in the German message catalog * cupstestppd did not catch PPD files with bad UIConstraints values * The USB backend did not work with the current udev- created printers if the first printer was disconnected * Mirrored and rotated printing did not work with some documents * 2-sided printing with banners did not work properly on some printers * Updated the raw type rule to handle PJL within the first 4k of a print job * Added an Estonian translation * Clarified the documentation for the cupsd.conf @LOCAL and @IF(name) allow/deny functionality * The PostScript filters did not escape the Title and For comments in the print job header * The scheduler would use 100% CPU if browsing was disabled and the cupsd.conf file contained BrowsePoll lines * The cupsDirRead() function did not work properly on non*POSIX-compliant systems * The cupsFile functions didn't handle read/write errors properly - CUPS 1.2.4 fixes a number of web interface, scheduler, and CUPS API issues. Changes include: - The --with-printcap configure option did not work - The character set reported by cupsLangGet() did not always reflect the default character set of a given locale - Older Lexmark and Tektronix printers did not work with IPP - Failsafe printing did not work - Some web interface redirects did not work - The web interface change settings button could introduce a "Port 0" line in cupsd.conf if there was no loopback connection available - The web interface change settings and edit configuration file buttons would truncate the cupsd.conf file - The German web interface used the wrong printer icon images - The "All Documents" link in the on-line help was missing a trailing slash - The Polish web interface translation used the wrong URLs for the job history - The "reprint job" button did not work - The scheduler did not always report printer or job events properly - The scheduler always stopped the queue on error, regardless of the exit code, if the error policy was set to "stop-printer" - ppdEmitJCL() included UTF-8 characters in the JCL job name, which caused problems on some printers - Fixed a buffering problem that cause high CPU usage - The command-line applications did not convert command-line strings to UTF-8 as needed - cupsDirRead() incorrectly aborted when reading a symbolic link that pointed to a file/directory that did not exist - The cupsInterpretRasterPPD() function did not handle custom page sizes properly. - Upgrade to 1.2.3: * The scheduler did not send job-state or job-config-changed events when a job was held, released, or changed * The scheduler now aborts if the configuration file and directory checks fail * Fixed a problem with ippPort() not using the port number that was set via the client.conf file or CUPS_SERVER environment variable * HTTP headers were not buffered * Some IPP printers (HP) did not like UTF-8 job names * The CUPS desktop icon is now localized for Polish * Printer options were not always honored when printing * The openssl command would lock up the scheduler when generating an encryption certificate on some platforms due to a lack of entropy for the random number generator * The web admin page did not recognize that "Listen 631" enabled remote access * The web admin page did not check whether changes were made to the Basic Server Settings check boxes * The IPP backend could generate N*N copies in certain edge cases. * The scheduler did not restore remote printers properly when BrowseShortNames was enabled * Polling did not handle changes to the network environment on Mac OS X * The "make test" subscription tests used invalid notify-recipient-uri values * Printers could be left in an undefined state on system sleep * The Berkeley and System V commands did not always use the expected character set * Remote printing fixes * The cupstestppd utility did not validate translation strings for custom options properly. * Multi-language PPD files were not properly localized in the web interface * The admin page's simple settings options did not check for local domain socket or IPv6 addresses and did not use "localhost" as the listen address. * An empty BrowseProtocols, BrowseLocalProtocols, or BrowseRemoteProtocols line would crash the scheduler instead of disabling the corresponding browsing options. * The scheduler now logs IPP operation status as debug messages instead of info or error. * cupsFileRewind() didn't clear the end-of-file state. * cupstestppd didn't report the actual misspelling of the 1284DeviceID attribute * BrowseRelay didn't work on Debian * configure --without-languages didn't work * Manually added remote printers did not work * The header was not installed. * Updated the build files for Autoconf 2.60 * The scheduler incorrectly terminated the polling processes after receiving a partial log line. * The cups-lpd mini-daemon reported "No printer-state attribute found" errors when reporting the queue status * SNMP backend improvements * The scheduler erroneously reported an error with the CGI pipe * Fixed HP-UX compile problems * cupstestppd crashed with some PPD files * The and header files did not work with C++. - upgrade to version 1.2.2, which fixes several build, platform, notification, and printing bugs. Changes include: * Documentation updates * CUPS didn't know about alternate character set names for Asian text * The lpoptions -o and -r options did not work unless you specified a printer. * The lpoptions command incorrectly allowed users to set printer attributes like printer-type * httpWait() did not flush the write buffer, causing "bad request" errors when communicating with CUPS 1.1.x servers * Polling did not sanitize the printer description, location, or make and model strings like broadcasts did. * Polled printers did not show the server's default job-sheets option value. * The Samba password prompt was not properly localized * Added a German translation * The scheduler now creates self-signed SSL certficates automatically when using OpenSSL and CDSA for encryption, just as for GNU TLS. * The SNMP backend sporatically reported some printers as "unknown" * The scheduler now forces BrowseTimeout to be at least twice the BrowseInterval value and non-zero to avoid common configuration errors. * The scheduler incorrectly returned printer URIs of the form "ipp://server/printers/classname" for classes * Updated Japanese localization * The scheduler's SSL certificate/key directory was not created on installation * Added a mailto.conf man page and help page * The parallel and USB backends no longer wait for the printer to go on-line - this caused problems with certain printers that don't follow with the IEEE-1284 standard * The scheduler could crash on a reload when implicit classes were present * The IPP backend incorrectly used the CUPS_ENCRYPTION environment variable to determine the default encryption mode when printing * USB printing did not work on Solaris * The scheduler sorted job priorities in the wrong order * The scheduler did not automatically restart notifiers that exited or crashed * IPv6 support did not work on NetBSD * The EPM packaging file did not work * The scheduler used up the CPU if BrowseRemoteProtocols was empty * Custom page sizes did not work * The SNMP backend could crash on some systems when SNMP logging was enabled * Browsing could produce some funny printer names when ServerName was set to an IP address * Fixed the log message for BrowseRelay * Fixes to allow CUPS to compile on MirBSD * The scheduler incorrectly set the FINAL_CONTENT_TYPE environment variable * The pdftops filter incorrectly embedded a "produced by" comment, causing PDF printing not to work on some operating systems * Sending raw jobs from a client system could cause the client's scheduler to eventually crash * The scheduler now checks that the notifier exists prior to accepting a new subscription request. * The scheduler now reports the supported notify-recipient schemes based on the contents of the ServerBin/notifier directory. * Event notifications did not include the notify-sequence-number or other required attributes * Allow/Deny addresses of the form "11.22.33.*" did not work on Linux * cupsGetPPD() did not work if the scheduler was only listening on a domain socket * The scheduler could crash advertising a class * The scheduler could crash if the default printer was deleted * Added a new default CUPS raster format (v3) which does not compress the raster stream in order to provide the same cupsRasterReadPixels() and cupsRasterWritePixels() performance as CUPS 1.1.x. * The cupsaddsmb man page listed the wrong files for the CUPS driver. * Some configure --with options did not work * "Allow @IF(name)" didn't work if "name" wasn't the first network interface * The lpstat command did not use the correct character set when reporting the date and time * The cupsaddsmb command and web interface did not update the Windows PPD files properly, resulting in corrupt PPD files for the Windows client to use * The cupsd.conf man page didn't describe the Listen domain socket syntax * The scheduler no longer tries to support more than FD_SETSIZE file descriptors. * CDSA (encryption) support fixes for MacOS X. * The lppasswd program needs to be setuid to root to create and update the /etc/cups/passwd.md5 file * 32/64-bit library installation was broken * The USB backend now reports a "no such device" error when using the old filename-based USB URIs instead of the "success" error. * Increased the HTTP and IPP read timeouts to 10 seconds, as 1 second was too short on congested networks * The SNMP backend now uses the device description over the printer-make-and-model attribute when the attribute contains a generic name * Fixed another file descriptor leak when printing raw files * Raw queues were not shared via LDAP * The pstops filter didn't always embed PageSetup commands from the PPD file * "make install" didn't work if you disabled all of the localizations. * The scheduler didn't always choose the least costly filter. * Fixed parsing of IPv6 addresses in Allow, Deny, BrowseAllow, BrowseDeny, and BrowseRelay directives * Printers that were shared via LDAP did not get added to the LDAP server properly * LDAP browsing would crash the scheduler if a required value was missing * Special cases for the "localhost" hostname did not work, causing printing to not work when the /etc/hosts file did not contain a localhost entry * Updated the Spanish translation * Reverse-order page output was broken when N-up or landscape orientations were used * The parallel, serial, socket, and USB backends needed print data before they would report back-channel data, causing problems with several new drivers - fixed randomly crash when testing many PPD files (bugzilla#193354) - moved 3.0 from BETA to STABLE - do not use deprecated libpng function png_read_destroy - reinjected lost --datadir into configure - upgrade to version 1.2.1: a major release after long (>1y) development with new functions, many enhancements, bugfixes and new bugs - removed Required-Start: in rccupsrenice; real fix for (bugzilla#172708) - Only activate cupsrenice on initial install; [#172708]. - fixed pswrite.patch (bugzilla#169068) - fixed the usb naming for special HP printers (bugzilla#163833) - converted neededforbuild to BuildRequires - Move cups-config to the libs sub package. Then we do not bother anyone as cups-libs is required by cups-devel and cups; [#142004]. - Use -fstack-protector. - moved cups-config into main package (bugzilla#142004) - fixed %files for /etc/cups/printcap (bugzilla#140308) - fixed various xpdf security issues (bugzilla#137156) CVE-2005-3624, CVE-2005-3625, CVE-2005-3626, CVE-2005-3627, CVE-2005-3628, CVE-2005-3193 - fixed xpdf overflow CVE-2005-3193 (bugzilla#137156) - fixed the info of last printer in printcap file (bugzilla#132152) - added global lpoptions file (bugzilla#118982) - fixed $ppid test in rccupsrenice (bugzilla#119822) - fixed short description in rccupsrenice (bugzilla#121873) - changed filtering of mozilla-ps (bugzilla#130623) - fixed segfault in cupstestppd (bugzilla#116468) - fixed rccupsrenice: can handle mutliple pids in $ppid now (bugzilla#115863) - fixed rccupsrenice: link points to correct script - fixed rccupsrenice: requires changed to cupsd (bugzilla#115261) - fixed length of stftime array in lpstat (bugzilla#105732) - rccupsrenice checks if cupsd is running before processing (bugzilla#114650) - coolo wants a speedup of system boot: rccups: cupsd gets now a lower ionice value if booting in level 5 and rccupsrenice (new introduced) brings those io values back, later when system is up and running - removed backends pipe and novell; now in cups-backends - further changes for PIE - renamed latest patches to my naming schema - build with -fPI[CE] (not -fpi[ce]) to avoid GOT overflows in certain packages (e.g. scribus) on s390* - build as PIE - Bugzilla #41006 "Charset detection in CUPS": add missing includes and fix charset and language detection. - removed permissions file from package (bugzilla#66305) - changed permission of xinetd.d file - fixed SUSE version in testpage (bugzilla#78075) - gcc4.0 compilation fixes (thx to mls) - fixed problem in lppasswd file generation (bugzilla#64370) - fixed problem in library with authorization - cupstestppd checks now PageSize more properly - fixed lpstat segfault issue (bugzilla#66328) - added "hplip" to rccups (bugzilla#65378) - introduced norootforbuild - update to version 1.1.23 and adaption of patches - added xpdf buffer overflow fix; CAN-2005-0064 (bugzilla#49840) - Use : in permissions file. - added additional xpdf buffer overflow patches (missing in this version) - updated novell backend (bugzilla#41773) - updated pipe backend (bugzilla#33659) - updated to cups-1.1.22 - adapted spec file, patches, etc. - Include common-* PAM config files in cups configuration - added creation of group ntadmin in %pre (bugzilla#45719) - cupstestppd fails on some doubtful Sharp PPDs (bugzilla#45648) - removed ed from neededforbuild list - fix for umlaut names when download of queue ppds (bugzilla#44975) - cups-1.1.21 is now released - cupsomatic removed (will be replaced by foomatic-rip/foomatic-filters) - more useable messages in preauth patch - ignores now short living childs in ppds.dat generation case - fixed security problem in cupsomatic, CAN-2004-0801 (bugzilla#44233) - first try for cups-1.1.21rc2 - renumbered patches - adapted old SuSE patches to this version - removed /var/adm/notify -- ancient and no longer needed - added test for /.buildenv to make users happy (bugzilla#43503) - removed needless "rm -rf $RPM_BUILD_ROOT" in %install - added -fno-strict-aliasing compile option (*sic*) - added missing mime handling of pswrite (bugzilla#33862) - removed x-devel-packages from neededforbuild - fixed segfault in library (bugzilla#38381) - tested and works fine - fixed image links in web interface (bugzilla#36403) - fixed cupstestppd (bugzilla#36688) - cupstestppd failed if PPD file has default for non-existance names (STR#476) - patch for CPU excess if CGI is sending faster than client receiving (STR#595) - faster scan of ppd files (bugzilla#33222) - patch for broken HTTP authentication cache (STR#517) - redirect administration tasks to primary server (STR#491) - added pswrite filter script to produce PostScript1 output - beautified filter ogonki "mktemp -q /tmp/dvitops.XXXXXX" -> ogonki.XXXXXX - removed cups-1.1.19-no_dvi.patch, fixed cups-mime.patch instead - added PS1 and PS2 PPD files (bugzilla#34938) - backport of signed char usage for weird platforms (STR#518) - cups-lpd mini-daemon rejects jobs if queue behing is rejecting (STR#515) - fix for too fast CGI data delivery (STR#484) - backport of fixes in CVS repository for scheduler and library, with many fixes, like crash on remote reject, close client on errors, propper http flushing, etc. -- first print tests work fine. - many backports of fixes in CVS repository - upgrade of pdftops to version 2.03 - memory overwrite fixed in rastertoepson - fixed md5sum revealing problem (bugzilla#32862) - fixed naming of some usb printers - activated incidentally removed usermode patch (bugzilla#34438) - added "printbill" to rccups - Add pam-devel to neededforbuild - fixed permission of directory interfaces (bugzilla#33337) - added new option "-p" to generate ppds.dat only and exit (bugzilla#33222) - added openslp support - upgraded to 1.1.20 (final) - changed LC_MESSAGES -> LC_CTYPE (= fixed bugzilla#26006) - update to 1.1.20rc2 - authentication method for /admin changed (bugzilla#31158) - fixed PPDs defaults: Letter -> A4 (bugzilla#30662) - Set sticky bit for /var/spool/cups/tmp - changed rcfile, as suggested in bugzilla#28444 - fixed typo in configuration for preauth security patch - fix for the SLP browsing patch (missing/wrong initialize of variables) - fix for boolean options in filters (CUPS STR#249) - fix for check of written bytes in 4 backends (CUPS STR#253) - fix for segfault when browsing and SLP is set on (CUPS STR#259) - fix for restart problem of processed jobs (CUPS STR#226) - fix for LPD port number in URI (CUPS STR#249) - fix for Landscape PDF offset rotation position (CUPS STR#243) - generated /etc/cups/printcap and link /etc/printcap due to UserMode (bugzilla#29671) - fixed %_libdir problem in xinetd.d/cups-lpd (bugzilla#29877) - last fix of bugzilla#29418 didn't work in reality. on specfile again. - "-y" for fillup_and_insserv - DOCDIR removed to fix bugzilla#29418 - specfile: daemon has now security patches -> start it on boot per default - specfile: restart of daemon on package update - Set explicit correct permissions of /etc/cups contents, else cups will do it. - changed attributes for files (bugzilla#28736) - fix for locale destroying (bugzilla#29218) - made restrictrions in cupsd.conf to take preauthorization effect - cupsd runs now as lp:lp (as suggested in bugzilla#28444) - added preauthorization patch from okir - seems to work - thx - fixed USB backend to report manufacturer and model, if description string is missing (cups STR#174) - fixed problem with some embedded Type1C fonts (cups STR#177) - fixed problem when reading files and using the POSIX locale (cups STR#159) - added official patch for cupstestppd problem (bugzilla#27950) - fixed problem with "keepalive on" (bugzilla#28154) - fixed encode options to honor "yes" and "on" as values too - fixed metadata in sysconfig file (bugzilla#28861) - fixed cupstestppd (bugzilla#27950) - don't strip explicitly, but let the brp scripts handle it - fixed ogonkify (bugzilla#28307) - fixed 64bit problem in printers.cgi (bugzilla#24786) - removed dvi printing support due to missing packages (bugzilla#27032) - splitted out foomatic-filters package, which is cups independed (except Coolo's faulty checking) - fixed mandir problem under non-i386 architecture - remove smb backand from file list and init script; it's now part of the samba-client package - added ptal to Should-Start in rccups (bugzilla#27159) - Add missing directories to filelist - 1.1.19 is released -> updated - remove unpackaged files from buildroot - updated to 1.1.19rc3 - removed unnecessary patches - removed README.SuSE (bugzilla#26479) - added patch for cgi-interface: hostname is now mapped to localhost - updated PrintAnalyzer script - fixed "endless attempts to print" problem (bugzilla#25152) - installs now correct pam file (bugzilla#23277) - fixed location of foomatic-rip filters -> /usr/bin - added link for foomatic-rip - updated foomatic-rip (to latest, fixed version) - fixed typo for manpage installation of foomatic-rip - fixed file list of cups and cups-client (foomatic-rip is part of cups and therefore the corresponding package should contain the manpage too) - updated cupsomatic to linuxprinting.org (hopefully fixed accounting problem) - fix for add printer with KDE util (from CVS head) - fixed again filelist :) - fixed documenation path (buzgzilla#24083) - fixed PPD file parsing (from CVS head) - tested daemon - fix filelist (file listed twice) - updated foomatic-gswrapper - added new foomatic-rip: filter, config file and manpage - updated backends novell and pipe - renamed sysconfig metadata: sysconfig.cups -> cups.sysconfig - renamed permissions file: permissions.cups -> cups.permissions - fixed problem in lpoptions (no more loops! :) - Add sysconfig metadata [#22629] - Use pam_unix2.so instead of pam_unix.so - fixed "Error message when starting cups daemon" problem (bugzilla#22472) - removed unnecessary DocumentRoot setting cupsd.conf - changed replacement of distribution in testprint.ps - rccups: moved hotplug from required start to should-start (bugzilla#23054) - added /usr/bin/cupstestppd (bugzilla#23143) - created xinetd.d file for cups-lpd - added usb patch (for epson printers) - added herrno patch in IPP protocol - added two backends (pipe + novell), written by jsrain@suse.cz - welcome back foomatic filter (makes more sense to have it here) - updated to 1.1.18, adapted testpage.diff for new version - fixed test for link problem in rccups - removed foomatic filter. with next suse release will be in pkg cups-drivers - updated to version 1.1.17, removed lib64 patch (now already in source tree) - updated %files for all cups subpackages. (Now new cups files are included too :-) - removed debuging option in spec file. - updated to version 1.1.16, removed or adapted SuSE patches - added prereq for groupadd (#19300) - fix postinstall - changed %post: removed "insserv" to make yast2 and security happy - changed cupsd.conf for 127.0.0.2 access (bugzilla#18764) - added directory /usr/share/cups/drivers for cupsaddsmb/samba - fixed foomatic and foomatic-gswrapper (bugzilla#18425) - gave %files sections a %deffattr and gave special files and dirs a required %attr permissions of lp.sys (bugzilla#18126) - fixed hardcoded path CUPS_SERVERBIN (fixes ghostscript on lib64 archs) - Correct PreReq - cups-devel now requires exact matching version of cups-libs - added /var/log/cups to cups-libs (bugzilla#17617) - add %run_ldconfig - fix for author patch: crashed on reload signal (tested for stability) - using now fillup to generate sysconfig file - replaced delayed exit patch by CUPS authors one - again rccups: rc.config only parsed, if present (for backward compatibility) - updated rccups to satisfy new SuSE requirements - added delayed exit of cupsd patch (for processing many PPD files) - adapted the pam file for SuSE (according to Thorstens proposal) - upgraded to version 1.1.15 and adapted all the old patches - moved %{_sysconfdir}/cups to libs (as suggested by jsmeix) - added symbolic link /usr/bin/lpc (bugzilla #16652) - changed umask in rccups (bugzilla #16567) - Running cupsd if no printer is configured makes no sense. Do not activate cupsd after installation in %post. - fixed g++/cups-config problems in other cups subpackages - added 'cups-config' to devel - fixed linker problem (rpath) under x86_64 - therefore old x86_64 fix is no longer necessary: removed. - added %ifarch x86_64 to avoid linking problems in specfile. - updated to 1.1.14 - removed unnecessary patches - adapted testpage.ps patch to new file - fixed permission problem with lppasswd - fixed %files section (now includes all %dirs too) - don't call autoreconf, we can't use autoheader and automake here - fixed too restrictive IPP security fix - fixed documentation path (#13889) - reorganized online documentation. old structure might confuse people (#13849) - completed the IPP security fix again (hopefully the last time) - completed the IPP security fix - updated perl scripts cupsomatic, and foomatic-gswrapper - made patch cups-cs-utf8.dif again. got build problems with last version. - Added iso-8859-2 patch for czech utf-8 locale. Thanks to Petr Blahos . - added IPP security fix - log tcp-wrappers based connection refusals to cups' own logfiles instead of syslog. - changed neededforbuild to - added support for tcp-wrappers (cups-1.1.12-libwrap-addition.dif) token for /etc/hosts.{allow,deny} is "cupsd". - Fix gcc version check. - cups-client does not provide print_daemon anymore. print_daemon is required by aps but cups-client does not satisfy aps regarding this. - START_CUPS variable removed - up to 1.1.12 - fixes specfile - add standard postscript PPD - set DefaultPage{Size,Region} to A4 in ppd files - now reqiures ghostscript_any - add /etc/permissions.d/cups-client (#4094) - personalize test page - move old font directory if existing and send mail - up to 1.1.11 - remove ghostscript-fonts-std from neededforbuild, this is only a runtime requirement - work around cups' broken tmp file handling (#10142) - move client.conf to libs package - activate cat8 man pages - add README.SuSE - update lphelp - split into cups-client and cups(-server) package - add %ghosty smb printer backend support - re-add ogonky for non-latin1 charsets (#9864) - add printanalyzer script in doc - removed cups.conf (now provided by susehelp) - Remove -j parameter from spec file - update to 1.1.10-1 (many fixes) - fix output for dvi's (bug #9862) - new poll_ppd_base - split out cups-libs from cups - add ssl directory - make correct links for cups libraries - use ghostscript fonts which are the same as the cups fonts and adjust dependecy for ghostscript-fonts-std - enable SSL - correct init script - new version 1.1.9 . - updated init script to new skeleton (Bug #8981). - added support for PS files created by Netscape. - Fix missing declarations. - moved foomatic-gswrapper and cupsomatic from cups-drivers to cups - patched cupsd to use /dev/urandom instead of /dev/random. This fixes bug #6703 - spec file overhaul - using RPM_BUILD_ROOT now - removed /etc/printcap from file list - removed dependency to cups-drivers - Wake up Epson Stylus USB printers before sending the print job. - Added czech translations (czech.dif). - added cups.conf for susehelp - USB printers can be now addressed using URI usb:?vendor=&prod_id= where and are USB identification numbers. (e.g. usb:/dev/usb/lp?vendor=04a9&prod_id=1052 for Canon BJC-6100) - fixed pplication/dvi -> application/dvi in conf/mime.convs - update to 1.1.6-3 (fixing several security issues) - update to 1.1.6 (fixes possible DoS attack) - added missing reqiures for cups-drivers - update to version 1.1.5 - cups configuration changed - Browsing now Off by default - added DVI filter - fixed spec - fixed startscript - added rc.config fillup and SuSEconfig script to automatically set browse address if demanded - split into system and development package - documentation root changed - update to version 1.1.4 - small changes in spec file - make post-script succeed unconditionally - update to version 1.1.3 - restart daemon if already started - added two little tools (poll_ppd_base, lphelp) - added a few compatibility links - turned automatic generation of printcap on - turned implicit classes off since they are buggy - fixed directory structure - added links to lpd and rclpd - added Conflicts line - initial package