--- ceph-10.2.8.orig/debian/ceph-base.dirs
+++ ceph-10.2.8/debian/ceph-base.dirs
@@ -0,0 +1,4 @@
+var/lib/ceph/tmp
+var/lib/ceph/bootstrap-osd
+var/lib/ceph/bootstrap-mds
+var/lib/ceph/bootstrap-rgw
--- ceph-10.2.8.orig/debian/ceph-base.docs
+++ ceph-10.2.8/debian/ceph-base.docs
@@ -0,0 +1 @@
+README
--- ceph-10.2.8.orig/debian/ceph-base.install
+++ ceph-10.2.8/debian/ceph-base.install
@@ -0,0 +1,23 @@
+etc/bash_completion.d/ceph
+usr/sbin/ceph-create-keys
+usr/bin/ceph-detect-init
+usr/bin/ceph-debugpack
+usr/bin/ceph-run
+usr/bin/crushtool
+usr/bin/monmaptool
+usr/bin/osdmaptool
+usr/lib/ceph/ceph_common.sh
+usr/lib/ceph/erasure-code/*
+usr/lib/rados-classes/*
+usr/share/doc/ceph/sample.ceph.conf
+usr/share/doc/ceph/sample.fetch_config
+usr/share/man/man8/ceph-debugpack.8
+usr/share/man/man8/ceph-deploy.8
+usr/share/man/man8/ceph-run.8
+usr/share/man/man8/crushtool.8
+usr/share/man/man8/monmaptool.8
+usr/share/man/man8/osdmaptool.8
+usr/lib/python*/dist-packages/ceph_detect_init*
+usr/share/man/man8/ceph-detect-init.8
+usr/share/man/man8/ceph-create-keys.8
+usr/bin/ceph-client-debug
--- ceph-10.2.8.orig/debian/ceph-base.lintian-overrides
+++ ceph-10.2.8/debian/ceph-base.lintian-overrides
@@ -0,0 +1,6 @@
+#
+# the rados classes should NOT be stripped.
+#
+ceph: unstripped-binary-or-object ./usr/lib/rados-classes/libcls_rbd.so.1.0.0
+ceph: unstripped-binary-or-object ./usr/lib/rados-classes/libcls_rgw.so.1.0.0
+
--- ceph-10.2.8.orig/debian/ceph-base.postinst
+++ ceph-10.2.8/debian/ceph-base.postinst
@@ -0,0 +1,61 @@
+#!/bin/sh
+# vim: set noet ts=8:
+# postinst script for ceph
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#
+# 	postinst configure <most-recently-configured-version>
+# 	old-postinst abort-upgrade <new-version>
+# 	conflictor's-postinst abort-remove in-favour <package> <new-version>
+# 	postinst abort-remove
+# 	deconfigured's-postinst abort-deconfigure in-favour <failed-install-package> <version> [<removing conflicting-package> <version>]
+#
+# The current action is to simply remove the mistakenly-added
+# /etc/init/ceph.conf file; this could be done in any of these cases,
+# although technically it will leave the system in a different state
+# than the original install that included that file.  So instead we
+# only remove on "configure", since that's the only time we know we're
+# successful in installing a newer package than the erroneous version.
+
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+[ -f "/etc/default/ceph" ] && . /etc/default/ceph
+[ -z "$SERVER_USER" ] && SERVER_USER=ceph
+[ -z "$SERVER_GROUP" ] && SERVER_GROUP=ceph
+
+case "$1" in
+    configure)
+	rm -f /etc/init/ceph.conf
+	[ -x /sbin/start ] && start ceph-all || :
+
+        # adjust file and directory permissions
+	for DIR in /var/lib/ceph/* ; do
+	    if ! dpkg-statoverride --list $DIR >/dev/null
+	    then
+		chown $SERVER_USER:$SERVER_GROUP $DIR
+	    fi
+	done
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+	:
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- ceph-10.2.8.orig/debian/ceph-base.prerm
+++ ceph-10.2.8/debian/ceph-base.prerm
@@ -0,0 +1,23 @@
+#!/bin/sh
+# vim: set noet ts=8:
+
+set -e
+
+case "$1" in
+    remove)
+	[ -x /sbin/stop ] && stop ceph-all || true
+	invoke-rc.d ceph stop || {
+	    RESULT=$?
+	    if [ $RESULT != 100 ]; then
+		exit $RESULT
+	    fi
+	}
+	;;
+
+    *)
+	;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- ceph-10.2.8.orig/debian/ceph-common.dirs
+++ ceph-10.2.8/debian/ceph-common.dirs
@@ -0,0 +1,3 @@
+etc/ceph
+var/log/ceph
+var/lib/ceph
--- ceph-10.2.8.orig/debian/ceph-common.install
+++ ceph-10.2.8/debian/ceph-common.install
@@ -0,0 +1,37 @@
+etc/bash_completion.d/rados
+etc/bash_completion.d/rbd
+usr/bin/ceph
+usr/bin/ceph-authtool
+usr/bin/ceph-conf
+usr/bin/ceph-dencoder
+usr/bin/ceph-rbdnamer
+usr/bin/ceph-syn
+usr/bin/ceph-crush-location
+usr/bin/cephfs-data-scan
+usr/bin/cephfs-journal-tool
+usr/bin/cephfs-table-tool
+usr/bin/rados
+usr/bin/rbd
+usr/bin/rbdmap
+usr/bin/rbd-replay*
+usr/bin/ceph-post-file
+usr/bin/ceph-brag
+usr/share/man/man8/ceph-authtool.8
+usr/share/man/man8/ceph-conf.8
+usr/share/man/man8/ceph-dencoder.8
+usr/share/man/man8/ceph-rbdnamer.8
+usr/share/man/man8/ceph-syn.8
+usr/share/man/man8/ceph-post-file.8
+usr/share/man/man8/ceph.8
+usr/share/man/man8/rados.8
+usr/share/man/man8/rbd.8
+usr/share/man/man8/rbdmap.8
+usr/share/man/man8/rbd-replay*.8
+usr/share/ceph/known_hosts_drop.ceph.com
+usr/share/ceph/id_rsa_drop.ceph.com
+usr/share/ceph/id_rsa_drop.ceph.com.pub
+etc/ceph/rbdmap
+etc/init.d/rbdmap
+lib/udev/rules.d/50-rbd.rules
+usr/lib/python*/dist-packages/ceph_argparse.py*
+usr/lib/python*/dist-packages/ceph_daemon.py*
--- ceph-10.2.8.orig/debian/ceph-common.postinst
+++ ceph-10.2.8/debian/ceph-common.postinst
@@ -0,0 +1,107 @@
+#!/bin/sh
+# vim: set noet ts=8:
+# postinst script for ceph-mds
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#
+# 	postinst configure <most-recently-configured-version>
+# 	old-postinst abort-upgrade <new-version>
+# 	conflictor's-postinst abort-remove in-favour <package> <new-version>
+# 	postinst abort-remove
+# 	deconfigured's-postinst abort-deconfigure in-favour <failed-install-package> <version> [<removing conflicting-package> <version>]
+#
+
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+# Let the admin override these distro-specified defaults.  This is NOT
+# recommended!
+[ -f "/etc/default/ceph" ] && . /etc/default/ceph
+
+[ -z "$SERVER_HOME" ] && SERVER_HOME=/var/lib/ceph
+[ -z "$SERVER_USER" ] && SERVER_USER=ceph
+[ -z "$SERVER_NAME" ] && SERVER_NAME="Ceph storage service"
+[ -z "$SERVER_GROUP" ] && SERVER_GROUP=ceph
+[ -z "$SERVER_UID" ] && SERVER_UID=64045  # alloc by Debian base-passwd maintainer
+[ -z "$SERVER_GID" ] && SERVER_GID=$SERVER_UID
+
+
+# Groups that the user will be added to, if undefined, then none.
+[ -z "$SERVER_ADDGROUP" ] && SERVER_ADDGROUP=
+
+case "$1" in
+    configure)
+       # create user to avoid running server as root
+       # 1. create group if not existing
+       if ! getent group | grep -q "^$SERVER_GROUP:" ; then
+          echo -n "Adding group $SERVER_GROUP.."
+          addgroup --quiet --system --gid $SERVER_GID \
+	      $SERVER_GROUP 2>/dev/null ||true
+          echo "..done"
+       fi
+       # 2. create user if not existing
+       if ! getent passwd | grep -q "^$SERVER_USER:"; then
+         echo -n "Adding system user $SERVER_USER.."
+         adduser --quiet \
+                 --system \
+                 --no-create-home \
+                 --disabled-password \
+	         --uid $SERVER_UID \
+	         --gid $SERVER_GID \
+                 $SERVER_USER 2>/dev/null || true
+         echo "..done"
+       fi
+       # 3. adjust passwd entry
+       echo -n "Setting system user $SERVER_USER properties.."
+       usermod -c "$SERVER_NAME" \
+               -d $SERVER_HOME   \
+               -g $SERVER_GROUP  \
+               $SERVER_USER
+       echo "..done"
+
+       # 5. adjust file and directory permissions
+       if ! dpkg-statoverride --list $SERVER_HOME >/dev/null
+       then
+           chown $SERVER_USER:$SERVER_GROUP $SERVER_HOME
+           chmod u=rwx,g=rx,o= $SERVER_HOME
+       fi
+       if ! dpkg-statoverride --list /var/log/ceph >/dev/null
+       then
+           chown -R $SERVER_USER:$SERVER_GROUP /var/log/ceph
+	   # members of group ceph can log here, but cannot remove
+	   # others' files.  non-members cannot read any logs.
+           chmod u=rwx,g=rwxs,o=t /var/log/ceph
+       fi
+
+       # 6. fix /var/run/ceph
+       if [ -d /var/run/ceph ]; then
+	   echo -n "Fixing /var/run/ceph ownership.."
+	   chown $SERVER_USER:$SERVER_GROUP /var/run/ceph
+	   echo "..done"
+       fi
+
+       # create /run/ceph.  fail softly if systemd isn't present or
+       # something.
+       [ -x /bin/systemd-tmpfiles ] && systemd-tmpfiles --create || true
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+	:
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- ceph-10.2.8.orig/debian/ceph-common.postrm
+++ ceph-10.2.8/debian/ceph-common.postrm
@@ -0,0 +1,47 @@
+#!/bin/sh
+# postrm script for ceph-common
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    remove)
+    ;;
+
+    purge)
+	rm -rf /var/log/ceph 
+	rm -rf /etc/ceph
+    ;;
+
+    upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- ceph-10.2.8.orig/debian/ceph-fs-common.install
+++ ceph-10.2.8/debian/ceph-fs-common.install
@@ -0,0 +1,4 @@
+usr/sbin/mount.ceph sbin
+usr/bin/cephfs
+usr/share/man/man8/cephfs.8
+usr/share/man/man8/mount.ceph.8
--- ceph-10.2.8.orig/debian/ceph-fuse.install
+++ ceph-10.2.8/debian/ceph-fuse.install
@@ -0,0 +1,3 @@
+usr/sbin/mount.fuse.ceph sbin
+usr/bin/ceph-fuse
+usr/share/man/man8/ceph-fuse.8
--- ceph-10.2.8.orig/debian/ceph-mds.dirs
+++ ceph-10.2.8/debian/ceph-mds.dirs
@@ -0,0 +1 @@
+var/lib/ceph/mds
--- ceph-10.2.8.orig/debian/ceph-mds.install
+++ ceph-10.2.8/debian/ceph-mds.install
@@ -0,0 +1,2 @@
+usr/bin/ceph-mds
+usr/share/man/man8/ceph-mds.8
--- ceph-10.2.8.orig/debian/ceph-mds.postinst
+++ ceph-10.2.8/debian/ceph-mds.postinst
@@ -0,0 +1,51 @@
+#!/bin/sh
+# vim: set noet ts=8:
+# postinst script for ceph-mds
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#
+# 	postinst configure <most-recently-configured-version>
+# 	old-postinst abort-upgrade <new-version>
+# 	conflictor's-postinst abort-remove in-favour <package> <new-version>
+# 	postinst abort-remove
+# 	deconfigured's-postinst abort-deconfigure in-favour <failed-install-package> <version> [<removing conflicting-package> <version>]
+#
+
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+[ -f "/etc/default/ceph" ] && . /etc/default/ceph
+[ -z "$SERVER_USER" ] && SERVER_USER=ceph
+[ -z "$SERVER_GROUP" ] && SERVER_GROUP=ceph
+
+case "$1" in
+    configure)
+	[ -x /sbin/start ] && start ceph-mds-all || :
+
+	if ! dpkg-statoverride --list /var/lib/ceph/mds >/dev/null
+	then
+            chown $SERVER_USER:$SERVER_GROUP /var/lib/ceph/mds
+	fi
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+	:
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- ceph-10.2.8.orig/debian/ceph-mds.prerm
+++ ceph-10.2.8/debian/ceph-mds.prerm
@@ -0,0 +1,23 @@
+#!/bin/sh
+# vim: set noet ts=8:
+
+set -e
+
+case "$1" in
+    remove)
+	[ -x /sbin/stop ] && stop ceph-mds-all || :
+	invoke-rc.d ceph stop mds || {
+	    RESULT=$?
+	    if [ $RESULT != 100 ]; then
+		exit $RESULT
+	    fi
+	}
+	;;
+
+    *)
+	;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- ceph-10.2.8.orig/debian/ceph-mon.dirs
+++ ceph-10.2.8/debian/ceph-mon.dirs
@@ -0,0 +1 @@
+var/lib/ceph/mon
--- ceph-10.2.8.orig/debian/ceph-mon.install
+++ ceph-10.2.8/debian/ceph-mon.install
@@ -0,0 +1,5 @@
+usr/bin/ceph-mon
+usr/bin/ceph-rest-api
+usr/share/man/man8/ceph-mon.8
+usr/share/man/man8/ceph-rest-api.8
+usr/lib/python*/dist-packages/ceph_rest_api.py*
--- ceph-10.2.8.orig/debian/ceph-mon.postinst
+++ ceph-10.2.8/debian/ceph-mon.postinst
@@ -0,0 +1,45 @@
+# vim: set noet ts=8:
+# postinst script for ceph-mon
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#
+# 	postinst configure <most-recently-configured-version>
+# 	old-postinst abort-upgrade <new-version>
+# 	conflictor's-postinst abort-remove in-favour <package> <new-version>
+# 	postinst abort-remove
+# 	deconfigured's-postinst abort-deconfigure in-favour <failed-install-package> <version> [<removing conflicting-package> <version>]
+#
+
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+[ -f "/etc/default/ceph" ] && . /etc/default/ceph
+[ -z "$SERVER_USER" ] && SERVER_USER=ceph
+[ -z "$SERVER_GROUP" ] && SERVER_GROUP=ceph
+
+case "$1" in
+    configure)
+	[ -x /sbin/start ] && start ceph-mon-all || :
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+	:
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- ceph-10.2.8.orig/debian/ceph-mon.prerm
+++ ceph-10.2.8/debian/ceph-mon.prerm
@@ -0,0 +1,23 @@
+#!/bin/sh
+# vim: set noet ts=8:
+
+set -e
+
+case "$1" in
+    remove)
+	[ -x /sbin/stop ] && stop ceph-mon-all || true
+	invoke-rc.d ceph stop mon || {
+	    RESULT=$?
+	    if [ $RESULT != 100 ]; then
+		exit $RESULT
+	    fi
+	}
+	;;
+
+    *)
+	;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- ceph-10.2.8.orig/debian/ceph-osd.dirs
+++ ceph-10.2.8/debian/ceph-osd.dirs
@@ -0,0 +1 @@
+var/lib/ceph/osd
--- ceph-10.2.8.orig/debian/ceph-osd.install
+++ ceph-10.2.8/debian/ceph-osd.install
@@ -0,0 +1,14 @@
+lib/udev/rules.d/95-ceph-osd.rules
+lib/udev/rules.d/60-ceph-by-parttypeuuid.rules
+usr/sbin/ceph-disk
+usr/sbin/ceph-disk-udev
+usr/bin/ceph-clsinfo
+usr/bin/ceph-objectstore-tool
+usr/bin/ceph-bluefs-tool
+usr/bin/ceph_objectstore_bench
+usr/bin/ceph-osd
+usr/lib/ceph/ceph-osd-prestart.sh
+usr/share/man/man8/ceph-clsinfo.8
+usr/share/man/man8/ceph-disk.8
+usr/share/man/man8/ceph-osd.8
+usr/lib/python*/dist-packages/ceph_disk*
--- ceph-10.2.8.orig/debian/ceph-osd.postinst
+++ ceph-10.2.8/debian/ceph-osd.postinst
@@ -0,0 +1,45 @@
+# vim: set noet ts=8:
+# postinst script for ceph-osd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#
+# 	postinst configure <most-recently-configured-version>
+# 	old-postinst abort-upgrade <new-version>
+# 	conflictor's-postinst abort-remove in-favour <package> <new-version>
+# 	postinst abort-remove
+# 	deconfigured's-postinst abort-deconfigure in-favour <failed-install-package> <version> [<removing conflicting-package> <version>]
+#
+
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+[ -f "/etc/default/ceph" ] && . /etc/default/ceph
+[ -z "$SERVER_USER" ] && SERVER_USER=ceph
+[ -z "$SERVER_GROUP" ] && SERVER_GROUP=ceph
+
+case "$1" in
+    configure)
+	[ -x /sbin/start ] && start ceph-osd-all || :
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+	:
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- ceph-10.2.8.orig/debian/ceph-osd.prerm
+++ ceph-10.2.8/debian/ceph-osd.prerm
@@ -0,0 +1,23 @@
+#!/bin/sh
+# vim: set noet ts=8:
+
+set -e
+
+case "$1" in
+    remove)
+	[ -x /sbin/stop ] && stop ceph-osd-all || true
+	invoke-rc.d ceph stop osd || {
+	    RESULT=$?
+	    if [ $RESULT != 100 ]; then
+		exit $RESULT
+	    fi
+	}
+	;;
+
+    *)
+	;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- ceph-10.2.8.orig/debian/ceph-resource-agents.install
+++ ceph-10.2.8/debian/ceph-resource-agents.install
@@ -0,0 +1 @@
+usr/lib/ocf/resource.d/ceph/*
--- ceph-10.2.8.orig/debian/ceph-test.install
+++ ceph-10.2.8/debian/ceph-test.install
@@ -0,0 +1,30 @@
+usr/bin/ceph-coverage
+usr/bin/ceph_bench_log
+usr/bin/ceph_kvstorebench
+usr/bin/ceph_multi_stress_watch
+usr/bin/ceph_erasure_code
+usr/bin/ceph_erasure_code_benchmark
+usr/bin/ceph_omapbench
+usr/bin/ceph_perf_objectstore
+usr/bin/ceph_perf_local
+usr/bin/ceph_perf_msgr_client
+usr/bin/ceph_perf_msgr_server
+usr/bin/ceph_psim
+usr/bin/ceph_radosacl
+usr/bin/ceph_rgw_jsonparser
+usr/bin/ceph_rgw_multiparser
+usr/bin/ceph_scratchtool
+usr/bin/ceph_scratchtoolpp
+usr/bin/ceph_smalliobench
+usr/bin/ceph_smalliobenchdumb
+usr/bin/ceph_smalliobenchfs
+usr/bin/ceph_smalliobenchrbd
+usr/bin/ceph_test_*
+usr/bin/ceph_tpbench
+usr/bin/ceph_xattr_bench
+usr/bin/ceph-monstore-tool
+usr/bin/ceph-osdomap-tool
+usr/bin/ceph-kvstore-tool
+usr/bin/librgw_file*
+usr/share/java/libcephfs-test.jar
+usr/lib/ceph/ceph-monstore-update-crush.sh
--- ceph-10.2.8.orig/debian/changelog
+++ ceph-10.2.8/debian/changelog
@@ -0,0 +1,715 @@
+ceph (10.2.8-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Ceph Release Team <ceph-maintainers@ceph.com>  Thu, 06 Jul 2017 14:56:18 +0000
+
+ceph (10.2.7-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Ceph Release Team <ceph-maintainers@ceph.com>  Mon, 10 Apr 2017 11:43:44 +0000
+
+ceph (10.2.6-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Ceph Release Team <ceph-maintainers@ceph.com>  Tue, 07 Mar 2017 13:29:39 +0000
+
+ceph (10.2.5-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Fri, 09 Dec 2016 20:08:23 +0000
+
+ceph (10.2.4-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Mon, 05 Dec 2016 22:15:20 +0000
+
+ceph (10.2.3-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 20 Sep 2016 22:04:22 +0000
+
+ceph (10.2.2-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 14 Jun 2016 11:43:23 +0000
+
+ceph (10.2.1-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Fri, 13 May 2016 17:50:33 +0000
+
+ceph (10.2.1-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Thu, 12 May 2016 21:48:00 +0000
+
+ceph (10.2.0-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Wed, 20 Apr 2016 11:29:47 +0000
+
+ceph (10.1.2-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 12 Apr 2016 17:42:55 +0000
+
+ceph (10.1.1-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Wed, 06 Apr 2016 00:45:18 +0000
+
+ceph (10.1.0-1) stable; urgency=medium
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Thu, 24 Mar 2016 10:53:47 +0000
+
+ceph (10.0.5) stable; urgency=low
+
+  * New upstream release (just fixing changelog)
+
+ -- Sage Weil <sage@newdream.net>  Fri, 11 Mar 2016 12:04:26 -0500
+
+ceph (10.0.4) stable; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 03 Mar 2016 13:34:18 -0500
+
+ceph (10.0.3) stable; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 08 Feb 2016 17:10:25 -0500
+
+ceph (10.0.2-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Wed, 13 Jan 2016 16:22:26 +0000
+
+ceph (10.0.1-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Mon, 14 Dec 2015 23:48:54 +0000
+
+ceph (10.0.0-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Mon, 16 Nov 2015 21:41:53 +0000
+
+ceph (9.2.0-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Jenkins Build Slave User <jenkins-build@jenkins-slave-wheezy.localdomain>  Tue, 03 Nov 2015 16:58:32 +0000
+
+ceph (9.1.0-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 13 Oct 2015 05:56:36 -0700
+
+ceph (9.0.3-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Fri, 21 Aug 2015 12:46:31 -0700
+
+ceph (9.0.2-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 14 Jul 2015 13:10:31 -0700
+
+ceph (9.0.1-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Fri, 05 Jun 2015 10:59:02 -0700
+
+ceph (9.0.0-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Mon, 04 May 2015 12:32:58 -0700
+
+ceph (0.94-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 07 Apr 2015 10:05:40 -0700
+
+ceph (0.93-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Fri, 27 Feb 2015 09:52:53 -0800
+
+ceph (0.92-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Mon, 02 Feb 2015 10:35:27 -0800
+
+ceph (0.91-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 13 Jan 2015 12:10:22 -0800
+
+ceph (0.90-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Fri, 19 Dec 2014 06:56:22 -0800
+
+ceph (0.89-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Wed, 03 Dec 2014 08:18:33 -0800
+
+ceph (0.88-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <adeza@redhat.com>  Tue, 11 Nov 2014 09:33:12 -0800
+
+ceph (0.87-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Wed, 29 Oct 2014 11:03:55 -0700
+
+ceph (0.86-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Tue, 07 Oct 2014 06:20:21 -0700
+
+ceph (0.85-1) stable; urgency=low
+
+  * Development release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Mon, 08 Sep 2014 06:31:31 -0700
+
+ceph (0.84-1) stable; urgency=low
+
+  * Development release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Mon, 18 Aug 2014 09:02:20 -0700
+
+ceph (0.83-1) stable; urgency=low
+
+  * Development release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Tue, 29 Jul 2014 13:42:53 -0700
+
+ceph (0.82-1) stable; urgency=low
+
+  * Development release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Wed, 25 Jun 2014 16:47:51 +0000
+
+ceph (0.81-1) stable; urgency=low
+
+  * Development release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Mon, 02 Jun 2014 18:37:27 +0000
+
+ceph (0.80-1) stable; urgency=low
+
+  * New upsream release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Tue, 06 May 2014 14:03:27 +0000
+
+ceph (0.80-rc1-1) stable; urgency=low
+
+  * New upsream release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Tue, 22 Apr 2014 21:21:44 +0000
+
+ceph (0.79-1) stable; urgency=low
+
+  * New upsream release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Mon, 07 Apr 2014 16:48:36 +0000
+
+ceph (0.78-1) stable; urgency=low
+
+  * New upsream release
+
+ -- Alfredo Deza <alfredo.deza@inktank.com>  Fri, 21 Mar 2014 22:05:12 +0000
+
+ceph (0.77-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Ken Dreyer <ken.dreyer@inktank.com>  Wed, 19 Feb 2014 22:54:06 +0000
+
+ceph (0.76-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Ken Dreyer <kdreyer@jenkins.front.sepia.ceph.com>  Mon, 03 Feb 2014 18:14:59 +0000
+
+ceph (0.75-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Ken Dreyer <kdreyer@jenkins.front.sepia.ceph.com>  Mon, 13 Jan 2014 21:05:07 +0000
+
+ceph (0.74-1) stable; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <glowell@jenkins.front.sepia.ceph.com>  Mon, 30 Dec 2013 21:02:35 +0000
+
+ceph (0.73-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 10 Dec 2013 04:55:06 +0000
+
+ceph (0.72-1) stable; urgency=low
+
+  * New upstream release
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Thu, 07 Nov 2013 20:25:18 +0000
+
+ceph (0.72-rc1-1) stable; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Wed, 30 Oct 2013 00:44:25 +0000
+
+ceph (0.71-1) stable; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Thu, 17 Oct 2013 09:19:02 +0000
+
+ceph (0.70-1) stable; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Fri, 04 Oct 2013 20:11:51 +0000
+
+ceph (0.69-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Wed, 18 Sep 2013 01:39:47 +0000
+
+ceph (0.68-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 03 Sep 2013 16:10:11 -0700
+
+ceph (0.67-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 13 Aug 2013 10:44:30 -0700
+
+ceph (0.67-rc3-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 30 Jul 2013 14:37:40 -0700
+
+ceph (0.67-rc2-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Wed, 24 Jul 2013 16:18:33 -0700
+
+ceph (0.67-rc1-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 22 Jul 2013 11:57:01 -0700
+
+ceph (0.66-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 08 Jul 2013 15:44:45 -0700
+
+ceph (0.65-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 25 Jun 2013 09:19:14 -0700
+
+ceph (0.64-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Wed, 12 Jun 2013 09:53:54 -0700
+
+ceph (0.63-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 28 May 2013 13:57:53 -0700
+
+ceph (0.62) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 14 May 2013 09:08:21 -0700
+
+ceph (0.61-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 06 May 2013 13:18:43 -0700
+
+ceph (0.60-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 01 Apr 2013 12:22:30 -0700
+
+ceph (0.59-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 19 Mar 2013 22:26:37 -0700
+
+ceph (0.58-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 04 Mar 2013 15:17:58 -0800
+
+ceph (0.57-1) quantal; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 19 Feb 2013 10:06:39 -0800
+
+ceph (0.56-1) quantal; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 31 Dec 2012 17:08:45 -0800
+
+ceph (0.55.1-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Wed, 12 Dec 2012 16:24:13 -0800
+
+ceph (0.55-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Mon, 03 Dec 2012 19:08:14 -0800
+
+ceph (0.54-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 13 Nov 2012 13:17:19 -0800
+
+ceph (0.53-1) precise; urgency=low
+
+  * New upstream release 
+
+ -- Gary Lowell <gary.lowell@inktank.com>  Tue, 16 Oct 2012 17:40:46 +0000
+
+ceph (0.52-1) precise; urgency=low
+
+  * New upstream release
+
+ -- Ubuntu <gary.lowell@inktank.com>  Thu, 27 Sep 2012 16:16:52 +0000
+
+ceph (0.51-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Sat, 25 Aug 2012 15:58:23 -0700
+
+ceph (0.50-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 13 Aug 2012 09:44:40 -0700
+
+ceph (0.49-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 20 Jul 2012 23:26:43 -0700
+
+ceph (0.48argonaut-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Sat, 30 Jun 2012 14:49:30 -0700
+
+ceph (0.47.3-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Wed, 20 Jun 2012 10:57:03 -0700
+
+ceph (0.47.2-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Wed, 23 May 2012 09:00:43 -0700
+
+ceph (0.47.1-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 21 May 2012 14:28:30 -0700
+
+ceph (0.47-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Sun, 20 May 2012 15:16:03 -0700
+
+ceph (0.46-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Sun, 29 Apr 2012 21:21:01 -0700
+
+ceph (0.45-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Tue, 10 Apr 2012 10:41:57 -0700
+
+ceph (0.44.2-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 05 Apr 2012 14:54:17 -0700
+
+ceph (0.44.1-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Tue, 27 Mar 2012 13:02:00 -0700
+
+ceph (0.44-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Sun, 18 Mar 2012 12:03:38 -0700
+
+ceph (0.43-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 02 Mar 2012 08:53:10 -0800
+
+ceph (0.42.2-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 24 Feb 2012 12:59:38 -0800
+
+ceph (0.42.1-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 23 Feb 2012 18:46:23 -0800
+
+ceph (0.42-1) experimental; urgency=low
+
+  * New upstream relese 
+
+ -- Sage Weil <sage@newdream.net>  Sun, 19 Feb 2012 15:30:20 -0800
+
+ceph (0.41-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 27 Jan 2012 10:42:11 -0800
+
+ceph (0.40-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 13 Jan 2012 08:36:02 -0800
+
+ceph (0.39-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 02 Dec 2011 09:01:20 -0800
+
+ceph (0.38-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 10 Nov 2011 15:06:44 -0800
+
+ceph (0.37-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 17 Oct 2011 08:35:42 -0700
+
+ceph (0.36-1) experimental; urgency=low
+
+  * New upstream release
+
+ -- Sage Weil <sage@newdream.net>  Fri, 30 Sep 2011 09:29:29 -0700
+
+ceph (0.35-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Wed, 21 Sep 2011 09:36:03 -0700
+
+ceph (0.34-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 26 Aug 2011 21:48:35 -0700
+
+ceph (0.33-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 15 Aug 2011 16:42:07 -0700
+
+ceph (0.32-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 29 Jul 2011 21:42:08 -0700
+
+ceph (0.30-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 27 Jun 2011 20:06:06 -0700
+
+ceph (0.29.1-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 16 Jun 2011 13:10:47 -0700
+
+ceph (0.29-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 06 Jun 2011 09:59:25 -0700
+
+ceph (0.28.2-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Sat, 28 May 2011 09:14:17 -0700
+
+ceph (0.28.1-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 23 May 2011 21:11:30 -0700
+
+ceph (0.28-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Tue, 17 May 2011 18:03:11 -0700
+
+ceph (0.27.1-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 05 May 2011 13:42:06 -0700
+
+ceph (0.27-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 22 Apr 2011 16:51:49 -0700
+
+ceph (0.26-1) experimental; urgency=low
+
+  * New upstream release.
+  * Make Ceph Linux only and build on all Linux archs (closes: #614890),
+    but only build-depend google-perftools on x86 and x64 archs only.
+  * Correct section of libcrush1, librados1, librbd1 and libceph1 to libs.
+  * Make Ceph cross buildable (closes: #618939), thanks to Hector Oron.
+  * Disable libatomic-ops on ARMv4t (armel) archs to prevent FTBFS
+    (closes: #615235), thanks go to Hector Oron again.
+  * Rename librados1{,-dbg,-dev} packages to librados2{,-dbg,-dev} ones;
+    conflict with and replace the former ones.
+
+ -- Laszlo Boszormenyi (GCS) <gcs@debian.hu>  Fri, 01 Apr 2011 16:28:11 +0100
+
+ceph (0.25.2-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Sun, 20 Mar 2011 21:07:38 -0700
+
+ceph (0.25.1-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 14 Mar 2011 14:43:47 -0700
+
+ceph (0.25-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 04 Mar 2011 14:39:54 -0800
+
+ceph (0.24.3-1) experimental; urgency=low
+
+  * New upstream release 
+
+ -- Sage Weil <sage@newdream.net>  Thu, 10 Feb 2011 09:14:00 -0800
+
+ceph (0.24.2-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Mon, 24 Jan 2011 11:02:24 -0800
+
+ceph (0.24.1-1) experimental; urgency=low
+
+  * New upstream release. 
+
+ -- Sage Weil <sage@newdream.net>  Fri, 07 Jan 2011 16:49:48 -0800
+
+ceph (0.24-1) experimental; urgency=low
+
+  * New upstream release.
+
+ -- Laszlo Boszormenyi (GCS) <gcs@debian.hu>  Wed, 01 Dec 2010 09:26:25 -0800
+
+ceph (0.23.1-1) experimental; urgency=low
+
+  * Initial release (Closes: #506040)
+
+ -- Sage Weil <sage@newdream.net>  Sun, 21 Nov 2010 15:22:21 -0800
--- ceph-10.2.8.orig/debian/compat
+++ ceph-10.2.8/debian/compat
@@ -0,0 +1 @@
+6
--- ceph-10.2.8.orig/debian/control
+++ ceph-10.2.8/debian/control
@@ -0,0 +1,716 @@
+Source: ceph
+Section: admin
+Priority: optional
+Homepage: http://ceph.com/
+Vcs-Git: git://github.com/ceph/ceph.git
+Vcs-Browser: https://github.com/ceph/ceph
+Maintainer: Ceph Maintainers <ceph-maintainers@lists.ceph.com>
+Uploaders: Ken Dreyer <kdreyer@redhat.com>,
+           Alfredo Deza <adeza@redhat.com>
+Build-Depends: autoconf,
+               automake,
+               autotools-dev,
+               btrfs-tools,
+	       cmake,
+               cpio,
+	       cryptsetup-bin | cryptsetup,
+               cython,
+               debhelper (>= 6.0.7~),
+	       dh-systemd,
+               default-jdk,
+               git,
+	       gdisk,
+               javahelper,
+               junit4,
+               libaio-dev,
+               libatomic-ops-dev,
+               libbabeltrace-ctf-dev,
+               libbabeltrace-dev,
+               libblkid-dev (>= 2.17),
+               libboost-dev (>= 1.42),
+               libboost-program-options-dev (>= 1.42),
+               libboost-system-dev (>= 1.42),
+               libboost-thread-dev (>= 1.42),
+	       libboost-regex-dev,
+	       libboost-random-dev,
+               libboost-iostreams-dev (>= 1.42),
+               libcurl4-gnutls-dev,
+               libexpat1-dev,
+               libfcgi-dev,
+               libfuse-dev,
+               libgoogle-perftools-dev [i386 amd64 arm64],
+               libkeyutils-dev,
+               libleveldb-dev,
+               libnss3-dev,
+               libsnappy-dev,
+               libldap2-dev,
+               libssl-dev,
+               liblttng-ust-dev,
+               libtool,
+               libudev-dev,
+               libxml2-dev,
+	       lsb-release,
+               parted,
+               pkg-config,
+               python (>= 2.6.6-3~),
+               python-argparse | libpython2.7-stdlib,
+               python-dev,
+               python-nose,
+	       python-setuptools,
+               python-sphinx,
+               virtualenv | python-virtualenv,
+               sdparm | hdparm,
+               uuid-runtime,
+               valgrind,
+               xfslibs-dev,
+               xfsprogs,
+               xmlstarlet,
+               yasm [amd64],
+               zlib1g-dev
+Standards-Version: 3.9.3
+
+Package: ceph
+Architecture: linux-any
+Depends: ceph-mon (= ${binary:Version}),
+         ceph-osd (= ${binary:Version})
+Recommends: ceph-mds (= ${binary:Version})
+Description: distributed storage and file system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+
+Package: ceph-base
+Architecture: linux-any
+Depends: binutils,
+         ceph-common (= ${binary:Version}),
+         cryptsetup-bin | cryptsetup,
+         debianutils,
+         findutils,
+         gdisk,
+         grep,
+         logrotate,
+         python,
+         python-argparse | libpython2.7-stdlib,
+         python-pkg-resources,
+         sdparm | hdparm,
+         psmisc,
+         xfsprogs,
+         ${misc:Depends},
+         ${shlibs:Depends}
+Recommends: btrfs-tools,
+            ceph-mds (= ${binary:Version}),
+            librados2 (= ${binary:Version}),
+            libradosstriper1 (= ${binary:Version}),
+            librbd1 (= ${binary:Version}),
+            ntp | time-daemon
+Replaces: ceph-common (<< 0.78-500), python-ceph (<< 0.92-1223),
+	  ceph-test (<< 0.94-1322), ceph (<< 10)
+Breaks: python-ceph (<< 0.92-1223), ceph-test (<< 0.94-1322), 
+        ceph (<< 10)
+X-Python-Version: >= 2.6
+Description: common ceph daemon libraries and management tools
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the libraries and management tools that are common among
+ the three Ceph server daemons (ceph-mon, ceph-osd, ceph-mds). These tools are
+ necessary for creating, running, and administering a Ceph storage cluster.
+
+Package: ceph-mds
+Architecture: linux-any
+Depends: ceph-base (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
+Recommends: ceph-fs-common (= ${binary:Version}),
+            ceph-fuse (= ${binary:Version}),
+            libcephfs1 (= ${binary:Version})
+Replaces: ceph (<< 0.93-417)
+Breaks: ceph (<< 0.93-417)
+Description: metadata server for the ceph distributed file system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the metadata server daemon, which is used to
+ create a distributed file system on top of the ceph storage cluster.
+
+Package: ceph-mds-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: ceph-mds (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for ceph-mds
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the debugging symbols for ceph-mds.
+
+Package: ceph-mon
+Architecture: linux-any
+Depends: ceph-base (= ${binary:Version}),
+         python-flask,
+         ${misc:Depends},
+         ${shlibs:Depends}
+Recommends: ceph-common
+Replaces: ceph (<< 10)
+Breaks: ceph (<< 10)
+Description: monitor server for the ceph storage system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the cluster monitor daemon for the Ceph storage
+ system. One or more instances of ceph-mon form a Paxos part-time parliament
+ cluster that provides extremely reliable and durable storage of cluster
+ membership, configuration, and state.
+
+Package: ceph-mon-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: ceph-mon (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for ceph-mon
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the debugging symbols for ceph-mon.
+
+Package: ceph-osd
+Architecture: linux-any
+Depends: ceph-base (= ${binary:Version}),
+         parted,
+         ${misc:Depends},
+         ${shlibs:Depends}
+Recommends: ceph-common (= ${binary:Version})
+Replaces: ceph (<< 10)
+Breaks: ceph (<< 10)
+Description: OSD server for the ceph storage system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the Object Storage Daemon for the Ceph storage system.
+ It is responsible for storing objects on a local file system
+ and providing access to them over the network.
+
+Package: ceph-osd-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: ceph-osd (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for ceph-osd
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the debugging symbols for ceph-osd.
+
+Package: ceph-fuse
+Architecture: linux-any
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Recommends: fuse
+Description: FUSE-based client for the Ceph distributed file system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ FUSE-based client that allows one to mount a Ceph file system without
+ root privileges.
+ .
+ Because the FUSE-based client has certain inherent performance
+ limitations, it is recommended that the native Linux kernel client
+ be used if possible.  If it is not practical to load a kernel module
+ (insufficient privileges, older kernel, etc.), then the FUSE client will
+ do.
+
+Package: ceph-fuse-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: ceph-fuse (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for ceph-fuse
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ FUSE-based client that allows one to mount a Ceph file system without
+ root privileges.
+ .
+ This package contains the debugging symbols for ceph-fuse.
+
+Package: rbd-fuse
+Architecture: linux-any
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Recommends: fuse
+Description: FUSE-based rbd client for the Ceph distributed file system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ FUSE-based client that allows one to map Ceph rbd images as files.
+ .
+ FUSE base client that allows one to map Ceph rbd images as files.
+
+Package: rbd-fuse-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: rbd-fuse (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for rbd-fuse
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ FUSE-based client that allows one to map Ceph rbd images as files.
+ .
+ This package contains the debugging symbols for rbd-fuse.
+
+Package: rbd-mirror
+Architecture: linux-any
+Depends: ceph-common (= ${binary:Version}),
+         librados2 (= ${binary:Version}),
+         ${misc:Depends}, ${shlibs:Depends}
+Description: Ceph daemon for mirroring RBD images
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ daemon for mirroring RBD images between Ceph clusters, streaming
+ changes asynchronously.
+
+Package: rbd-mirror-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: rbd-mirror (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for rbd-mirror
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ daemon for mirroring RBD images between Ceph clusters, streaming
+ changes asynchronously.
+ .
+ This package contains the debugging symbols for rbd-mirror.
+
+Package: rbd-nbd
+Architecture: linux-any
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Description: NBD-based rbd client for the Ceph distributed file system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ NBD-based client that allows one to map Ceph rbd images as local
+ block device.
+ .
+ NBD base client that allows one to map Ceph rbd images as local
+ block device.
+
+Package: rbd-nbd-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: rbd-nbd (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for rbd-nbd
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ NBD-based client that allows one to map Ceph rbd images as local
+ block device.
+ .
+ This package contains the debugging symbols for rbd-nbd.
+
+Package: ceph-common
+Architecture: linux-any
+Depends: librbd1 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends},
+         python-rados (= ${binary:Version}),
+         python-cephfs (= ${binary:Version}),
+         python-rbd (= ${binary:Version}),
+	 python-requests
+Conflicts: ceph-client-tools
+Replaces: ceph-client-tools,
+	  ceph (<< 10),
+	  ceph-test (<< 9.0.3-1646),
+	  python-ceph (<< 0.92-1223),
+	  librbd1 (<< 0.92-1238)
+Breaks: ceph (<< 10),
+	ceph-test (<< 9.0.3-1646),
+	python-ceph (<< 0.92-1223),
+	librbd1 (<< 0.92-1238)
+Suggests: ceph-base (= ${binary:Version}), ceph-mds (= ${binary:Version})
+Description: common utilities to mount and interact with a ceph storage cluster
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a collection
+ of common tools that allow one to interact with and administer a Ceph cluster.
+
+Package: ceph-common-dbg
+Architecture: linux-any
+Depends: ceph-common (= ${binary:Version}), ${misc:Depends}
+Conflicts: ceph-client-tools-dbg
+Replaces: ceph-client-tools-dbg,
+	  ceph-test-dbg (<< 9.0.3-1646)
+Breaks: ceph-test-dbg (<< 9.0.3-1646)
+Section: debug
+Priority: extra
+Description: debugging symbols for ceph-common
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a collection
+ of common tools that allow one to interact with and administer a Ceph cluster.
+ .
+ This package contains the debugging symbols for ceph-common.
+
+Package: ceph-fs-common
+Architecture: linux-any
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Conflicts: ceph-client-tools
+Suggests: ceph-mds (= ${binary:Version})
+Description: common utilities to mount and interact with a ceph file system
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a collection
+ of common tools, including the mount utility, that allows one to mount the
+ Ceph file system with the kernel client.
+
+Package: ceph-fs-common-dbg
+Architecture: linux-any
+Depends: ceph-fs-common (= ${binary:Version}), ${misc:Depends}
+Conflicts: ceph-client-tools-dbg
+Replaces: ceph-client-tools-dbg
+Section: debug
+Priority: extra
+Description: debugging symbols for ceph-fs-common
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a collection
+ of common tools, including the mount utility, that allows one to mount the
+ Ceph file system with the kernel client.
+ .
+ This package contains the debugging symbols for ceph-fs-common.
+
+Package: ceph-resource-agents
+Architecture: linux-any
+Recommends: pacemaker
+Priority: extra
+Depends: ceph (= ${binary:Version}), resource-agents, ${misc:Depends}
+Description: OCF-compliant resource agents for Ceph
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains the resource agents (RAs) which integrate
+ Ceph with OCF-compliant cluster resource managers,
+ such as Pacemaker.
+
+Package: librados2
+Conflicts: librados, librados1
+Replaces: librados, librados1
+Architecture: linux-any
+Section: libs
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Description: RADOS distributed object store client library
+ RADOS is a reliable, autonomic distributed object storage cluster
+ developed as part of the Ceph distributed storage system.  This is a
+ shared library allowing applications to access the distributed object
+ store using a simple file-like interface.
+
+Package: librados2-dbg
+Conflicts: librados1-dbg
+Replaces: librados1-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: librados2 (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for librados
+ RADOS is a reliable, autonomic distributed object storage cluster
+ developed as part of the Ceph distributed storage system.  This is a
+ shared library allowing applications to access the distributed object
+ store using a simple file-like interface.
+ .
+ This package contains debugging symbols for librados.
+
+Package: librados-dev
+Architecture: linux-any
+Section: libdevel
+Depends: librados2 (= ${binary:Version}), ${misc:Depends}
+Conflicts: librados1-dev, librados2-dev
+Replaces: librados1-dev, librados2-dev
+Description: RADOS distributed object store client library (development files)
+ RADOS is a reliable, autonomic distributed object storage cluster
+ developed as part of the Ceph distributed storage system.  This is a
+ shared library allowing applications to access the distributed object
+ store using a simple file-like interface.
+ .
+ This package contains development files needed for building applications that
+ link against librados.
+
+Package: libradosstriper1
+Architecture: linux-any
+Section: libs
+Depends: librados2 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
+Description: RADOS striping interface
+ Striping interface built on top of the rados library, allowing
+ to stripe bigger objects onto several standard rados objects using
+ an interface very similar to the rados one.
+
+Package: libradosstriper1-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: libradosstriper1 (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for libradosstriper
+ libradosstriper is a striping interface built on top of the rados
+ library, allowing to stripe bigger objects onto several standard
+ rados objects using an interface very similar to the rados one.
+ .
+ This package contains debugging symbols for libradosstriper.
+
+Package: libradosstriper-dev
+Architecture: linux-any
+Section: libdevel
+Depends: libradosstriper1 (= ${binary:Version}), ${misc:Depends}
+Description: RADOS striping interface (development files)
+ libradosstriper is a striping interface built on top of the rados
+ library, allowing to stripe bigger objects onto several standard
+ rados objects using an interface very similar to the rados one.
+ .
+ This package contains development files needed for building applications that
+ link against libradosstriper.
+
+Package: librbd1
+Architecture: linux-any
+Section: libs
+Depends: librados2 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
+Description: RADOS block device client library
+ RBD is a block device striped across multiple distributed objects
+ in RADOS, a reliable, autonomic distributed object storage cluster
+ developed as part of the Ceph distributed storage system.  This is a
+ shared library allowing applications to manage these block devices.
+
+Package: librbd1-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: librbd1 (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for librbd1
+ RBD is a block device striped across multiple distributed objects
+ in RADOS, a reliable, autonomic distributed object storage cluster
+ developed as part of the Ceph distributed storage system.  This is a
+ shared library allowing applications to manage these block devices.
+ .
+ This package contains debugging symbols for librbd1.
+
+Package: librbd-dev
+Architecture: linux-any
+Section: libdevel
+Depends: librados-dev (= ${binary:Version}),
+         librbd1 (= ${binary:Version}), ${misc:Depends}
+Conflicts: librbd1-dev
+Replaces: librbd1-dev
+Description: RADOS block device client library (development files)
+ RBD is a block device striped across multiple distributed objects
+ in RADOS, a reliable, autonomic distributed object storage cluster
+ developed as part of the Ceph distributed storage system.  This is a
+ shared library allowing applications to manage these block devices.
+ .
+ This package contains development files needed for building applications that
+ link against librbd1.
+
+Package: libcephfs1
+Conflicts: libceph, libceph1, libcephfs
+Replaces: libceph, libceph1, libcephfs
+Architecture: linux-any
+Section: libs
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Description: Ceph distributed file system client library
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ shared library allowing applications to access a Ceph distributed
+ file system via a POSIX-like interface.
+
+Package: libcephfs1-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: libcephfs1 (= ${binary:Version}), ${misc:Depends}
+Conflicts: libceph1-dbg
+Replaces: libceph1-dbg
+Description: debugging symbols for libcephfs1
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ shared library allowing applications to access a Ceph distributed
+ file system via a POSIX-like interface.
+ .
+ This package contains debugging symbols for libcephfs1.
+
+Package: libcephfs-dev
+Architecture: linux-any
+Section: libdevel
+Depends: libcephfs1 (= ${binary:Version}), ${misc:Depends}
+Conflicts: libceph-dev, libceph1-dev, libcephfs1-dev
+Replaces: libceph-dev, libceph1-dev, libcephfs1-dev
+Description: Ceph distributed file system client library (development files)
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.  This is a
+ shared library allowing applications to access a Ceph distributed
+ file system via a POSIX-like interface.
+ .
+ This package contains development files needed for building applications that
+ link against libcephfs.
+
+Package: librgw2
+Architecture: linux-any
+Section: libs
+Depends: librados2 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
+Description: RADOS Gateway client library
+ RADOS is a distributed object store used by the Ceph distributed
+ storage system.  This package provides a REST gateway to the
+ object store that aims to implement a superset of Amazon's S3
+ service.
+ .
+ This package contains the library interface and headers only.
+
+Package: librgw2-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: librgw2 (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for librbd1
+ RADOS is a distributed object store used by the Ceph distributed
+ storage system.  This package provides a REST gateway to the
+ object store that aims to implement a superset of Amazon's S3
+ service.
+ .
+ This package contains debugging symbols for librgw2.
+
+Package: librgw-dev
+Architecture: linux-any
+Section: libdevel
+Depends: librados-dev (= ${binary:Version}),
+         librgw2 (= ${binary:Version}), ${misc:Depends}
+Description: RADOS client library (development files)
+ RADOS is a distributed object store used by the Ceph distributed
+ storage system.  This package provides a REST gateway to the
+ object store that aims to implement a superset of Amazon's S3
+ service.
+ .
+ This package contains development files needed for building applications
+ that link against librgw2.
+
+Package: radosgw
+Architecture: linux-any
+Depends: ceph-common (= ${binary:Version}),
+         mime-support,
+         python-flask,
+         librgw2 (= ${binary:Version}),
+         ${misc:Depends},
+         ${shlibs:Depends}
+Recommends: ntp | time-daemon
+Description: REST gateway for RADOS distributed object store
+ RADOS is a distributed object store used by the Ceph distributed
+ storage system.  This package provides a REST gateway to the
+ object store that aims to implement a superset of Amazon's S3
+ service as well as the OpenStack Object Storage ("Swift") API.
+ .
+ This package contains the proxy daemon and related tools only.
+
+Package: radosgw-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: radosgw (= ${binary:Version}), ${misc:Depends}
+Description: debugging symbols for radosgw
+ RADOS is a distributed object store used by the Ceph distributed
+ storage system.  This package provides a REST gateway to the
+ object store that aims to implement a superset of Amazon's S3
+ service as well as the OpenStack Object Storage ("Swift") API.
+ .
+ This package contains debugging symbols for radosgw.
+
+Package: ceph-test
+Architecture: linux-any
+Depends: ceph-common, curl, xml2, xmlstarlet, ${misc:Depends}, ${shlibs:Depends}
+Description: Ceph test and benchmarking tools
+ This package contains tools for testing and benchmarking Ceph.
+
+Package: ceph-test-dbg
+Architecture: linux-any
+Section: debug
+Priority: extra
+Depends: ceph-test (= ${binary:Version}), ceph-common (= ${binary:Version}),
+         curl, xml2,
+         ${misc:Depends}, ${shlibs:Depends}
+Description: Ceph test and benchmarking tools
+ .
+ This package contains the debugging symbols for ceph-test.
+
+Package: python-ceph
+Architecture: linux-any
+Section: python
+Depends: python-rados (= ${binary:Version}),
+         python-rbd (= ${binary:Version}),
+         python-cephfs (= ${binary:Version})
+X-Python-Version: >= 2.6
+Description: Meta-package for python libraries for the Ceph libraries
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package is a metapackage for all python bindings.
+
+Package: python-rados
+Architecture: linux-any
+Section: python
+Depends: librados2 (= ${binary:Version}), ${misc:Depends}, ${python:Depends}
+Replaces: python-ceph (<< 0.92-1223)
+Breaks: python-ceph (<< 0.92-1223)
+X-Python-Version: >= 2.6
+Description: Python libraries for the Ceph librados library
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains Python libraries for interacting with Ceph's
+ RADOS object storage.
+
+Package: python-rbd
+Architecture: linux-any
+Section: python
+Depends: librbd1 (>= ${binary:Version}), ${misc:Depends}, ${python:Depends}
+Replaces: python-ceph (<< 0.92-1223)
+Breaks: python-ceph (<< 0.92-1223)
+X-Python-Version: >= 2.6
+Description: Python libraries for the Ceph librbd library
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains Python libraries for interacting with Ceph's
+ RBD block device library.
+
+Package: python-cephfs
+Architecture: linux-any
+Section: python
+Depends: libcephfs1 (= ${binary:Version}), ${misc:Depends}, ${python:Depends}
+Replaces: python-ceph (<< 0.92-1223)
+Breaks: python-ceph (<< 0.92-1223)
+X-Python-Version: >= 2.6
+Description: Python libraries for the Ceph libcephfs library
+ Ceph is a massively scalable, open-source, distributed
+ storage system that runs on commodity hardware and delivers object,
+ block and file system storage.
+ .
+ This package contains Python libraries for interacting with Ceph's
+ CephFS file system client library.
+
+Package: libcephfs-java
+Section: java
+Architecture: all
+Depends: libcephfs-jni (= ${binary:Version}), ${java:Depends}, ${misc:Depends}
+Description: Java libraries for the Ceph File System
+
+Package: libcephfs-jni
+Architecture: linux-any
+Section: libs
+Depends: libcephfs1 (= ${binary:Version}), ${java:Depends},
+         ${misc:Depends}, ${shlibs:Depends}
+Description: Java Native Interface library for CephFS Java bindings
--- ceph-10.2.8.orig/debian/copyright
+++ ceph-10.2.8/debian/copyright
@@ -0,0 +1,147 @@
+Format-Specification: http://anonscm.debian.org/viewvc/dep/web/deps/dep5/copyright-format.xml?revision=279&view=markup
+Name: ceph
+Maintainer: Sage Weil <sage@newdream.net>
+Source: http://ceph.com/
+
+Files: *
+Copyright: (c) 2004-2010 by Sage Weil <sage@newdream.net>
+License: LGPL2.1 (see COPYING-LGPL2.1)
+
+Files: doc/*
+Copyright: (c) 2010-2012 New Dream Network and contributors
+License: Creative Commons Attribution-ShareAlike (CC BY-SA)
+
+Files: src/mount/canonicalize.c
+Copyright: Copyright (C) 1993 Rick Sladkey <jrs@world.std.com>
+License: LGPL2 or later (see COPYING-GPL2)
+
+Files: src/os/btrfs_ioctl.h
+Copyright: Copyright (C) 2007 Oracle.  All rights reserved.
+License: GPL2 (see COPYING-GPL2)
+
+Files: src/include/ceph_hash.cc
+Copyright: None
+License: Public domain
+
+Files: src/common/bloom_filter.hpp
+Copyright: Copyright (C) 2000 Arash Partow
+License: Boost Software License, Version 1.0
+
+Files: m4/acx_pthread.m4
+Copyright: Steven G. Johnson <stevenj@alum.mit.edu>
+License: GPLWithACException
+
+Files: src/common/crc32c_intel*:
+Copyright:
+    Copyright 2012-2013 Intel Corporation All Rights Reserved.
+License: BSD 3-clause
+
+Files: src/common/sctp_crc32.c: 
+Copyright:
+    Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
+    Copyright (c) 2004-2006 Intel Corporation - All Rights Reserved
+License:
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions are met:
+ 
+  a) Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+ 
+  b) Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the distribution.
+ 
+  c) Neither the name of Cisco Systems, Inc. nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+ 
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+Files: src/json_spirit
+Copyright:
+	Copyright John W. Wilkinson 2007 - 2011
+License:
+  The MIT License
+
+  Copyright (c) 2007 - 2010 John W. Wilkinson
+
+  Permission is hereby granted, free of charge, to any person
+  obtaining a copy of this software and associated documentation
+  files (the "Software"), to deal in the Software without
+  restriction, including without limitation the rights to use,
+  copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the
+  Software is furnished to do so, subject to the following
+  conditions:
+
+  The above copyright notice and this permission notice shall be
+  included in all copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+  OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+  NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+  FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+  OTHER DEALINGS IN THE SOFTWARE.
+
+
+
+Files: src/test/common/Throttle.cc src/test/filestore/chain_xattr.cc
+Copyright: Copyright (C) 2013 Cloudwatt <libre.licensing@cloudwatt.com>
+License: LGPL2 or later
+
+Files: src/osd/ErasureCodePluginJerasure/*.{c,h}
+Copyright: Copyright (c) 2011, James S. Plank <plank@cs.utk.edu>
+License:
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions
+  are met:
+  
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+  
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+  
+   - Neither the name of the University of Tennessee nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
+  WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+Packaging:
+    Copyright (C) 2004-2009 by Sage Weil <sage@newdream.net>
+    Copyright (C) 2010 Canonical, Ltd.
+    Licensed under LGPL-2.1
+
+Files: src/test/perf_local.cc
+Copyright:
+  (c) 2011-2014 Stanford University
+  (c) 2011 Facebook
+License:
+  The MIT License
--- ceph-10.2.8.orig/debian/libcephfs-dev.install
+++ ceph-10.2.8/debian/libcephfs-dev.install
@@ -0,0 +1,4 @@
+usr/include/cephfs/libcephfs.h
+usr/lib/libcephfs.a
+usr/lib/libcephfs.la
+usr/lib/libcephfs.so
--- ceph-10.2.8.orig/debian/libcephfs-java.jlibs
+++ ceph-10.2.8/debian/libcephfs-java.jlibs
@@ -0,0 +1 @@
+src/java/libcephfs.jar
--- ceph-10.2.8.orig/debian/libcephfs-jni.install
+++ ceph-10.2.8/debian/libcephfs-jni.install
@@ -0,0 +1 @@
+usr/lib/libcephfs_jni.so* usr/lib/jni
--- ceph-10.2.8.orig/debian/libcephfs1.install
+++ ceph-10.2.8/debian/libcephfs1.install
@@ -0,0 +1,2 @@
+
+usr/lib/libcephfs.so.*
--- ceph-10.2.8.orig/debian/librados-dev.install
+++ ceph-10.2.8/debian/librados-dev.install
@@ -0,0 +1,14 @@
+usr/bin/librados-config
+usr/include/rados/buffer.h
+usr/include/rados/buffer_fwd.h
+usr/include/rados/crc32c.h
+usr/include/rados/librados.h
+usr/include/rados/librados.hpp
+usr/include/rados/page.h
+usr/include/rados/rados_types.h
+usr/include/rados/rados_types.hpp
+usr/include/rados/memory.h
+usr/lib/librados.a
+usr/lib/librados.la
+usr/lib/librados.so
+usr/share/man/man8/librados-config.8
--- ceph-10.2.8.orig/debian/librados2.install
+++ ceph-10.2.8/debian/librados2.install
@@ -0,0 +1,2 @@
+usr/lib/librados.so.*
+usr/lib/librados_tp.so.*
--- ceph-10.2.8.orig/debian/libradosstriper-dev.install
+++ ceph-10.2.8/debian/libradosstriper-dev.install
@@ -0,0 +1,5 @@
+usr/include/radosstriper/libradosstriper.h
+usr/include/radosstriper/libradosstriper.hpp
+usr/lib/libradosstriper.a
+usr/lib/libradosstriper.la
+usr/lib/libradosstriper.so
--- ceph-10.2.8.orig/debian/libradosstriper1.install
+++ ceph-10.2.8/debian/libradosstriper1.install
@@ -0,0 +1,2 @@
+
+usr/lib/libradosstriper.so.*
--- ceph-10.2.8.orig/debian/librbd-dev.install
+++ ceph-10.2.8/debian/librbd-dev.install
@@ -0,0 +1,6 @@
+usr/include/rbd/features.h
+usr/include/rbd/librbd.h
+usr/include/rbd/librbd.hpp
+usr/lib/librbd.a
+usr/lib/librbd.la
+usr/lib/librbd.so
--- ceph-10.2.8.orig/debian/librbd1.install
+++ ceph-10.2.8/debian/librbd1.install
@@ -0,0 +1,2 @@
+usr/lib/librbd.so.*
+usr/lib/librbd_tp.so.*
--- ceph-10.2.8.orig/debian/librgw-dev.install
+++ ceph-10.2.8/debian/librgw-dev.install
@@ -0,0 +1,5 @@
+usr/include/rados/librgw.h
+usr/include/rados/rgw_file.h
+usr/lib/librgw.a
+usr/lib/librgw.la
+usr/lib/librgw.so
--- ceph-10.2.8.orig/debian/librgw2.install
+++ ceph-10.2.8/debian/librgw2.install
@@ -0,0 +1 @@
+usr/lib/librgw.so.*
--- ceph-10.2.8.orig/debian/python-cephfs.install
+++ ceph-10.2.8/debian/python-cephfs.install
@@ -0,0 +1,3 @@
+usr/lib/python*/dist-packages/ceph_volume_client.py*
+usr/lib/python*/dist-packages/cephfs.so
+usr/lib/python*/dist-packages/cephfs-*.egg-info
--- ceph-10.2.8.orig/debian/python-rados.install
+++ ceph-10.2.8/debian/python-rados.install
@@ -0,0 +1,2 @@
+usr/lib/python*/dist-packages/rados.so
+usr/lib/python*/dist-packages/rados-*.egg-info
--- ceph-10.2.8.orig/debian/python-rbd.install
+++ ceph-10.2.8/debian/python-rbd.install
@@ -0,0 +1,2 @@
+usr/lib/python*/dist-packages/rbd.so
+usr/lib/python*/dist-packages/rbd-*.egg-info
--- ceph-10.2.8.orig/debian/radosgw.dirs
+++ ceph-10.2.8/debian/radosgw.dirs
@@ -0,0 +1 @@
+var/lib/ceph/radosgw
--- ceph-10.2.8.orig/debian/radosgw.install
+++ ceph-10.2.8/debian/radosgw.install
@@ -0,0 +1,7 @@
+etc/bash_completion.d/radosgw-admin
+usr/bin/radosgw
+usr/bin/radosgw-admin
+usr/bin/radosgw-token
+usr/bin/radosgw-object-expirer
+usr/share/man/man8/radosgw-admin.8
+usr/share/man/man8/radosgw.8
--- ceph-10.2.8.orig/debian/radosgw.postinst
+++ ceph-10.2.8/debian/radosgw.postinst
@@ -0,0 +1,57 @@
+#!/bin/sh
+# vim: set noet ts=8:
+# postinst script for radosgw
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#
+# 	postinst configure <most-recently-configured-version>
+# 	old-postinst abort-upgrade <new-version>
+# 	conflictor's-postinst abort-remove in-favour <package> <new-version>
+# 	postinst abort-remove
+# 	deconfigured's-postinst abort-deconfigure in-favour <failed-install-package> <version> [<removing conflicting-package> <version>]
+#
+# The current action is to simply remove the mistakenly-added
+# /etc/init/ceph.conf file; this could be done in any of these cases,
+# although technically it will leave the system in a different state
+# than the original install that included that file.  So instead we
+# only remove on "configure", since that's the only time we know we're
+# successful in installing a newer package than the erroneous version.
+
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+[ -f "/etc/default/ceph" ] && . /etc/default/ceph
+[ -z "$SERVER_USER" ] && SERVER_USER=ceph
+[ -z "$SERVER_GROUP" ] && SERVER_GROUP=ceph
+
+case "$1" in
+    configure)
+	[ -x /sbin/start ] && start radosgw-all || :
+
+	if ! dpkg-statoverride --list /var/lib/ceph/radosgw >/dev/null
+	then
+            chown $SERVER_USER:$SERVER_GROUP /var/lib/ceph/radosgw
+	fi
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+	:
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- ceph-10.2.8.orig/debian/radosgw.prerm
+++ ceph-10.2.8/debian/radosgw.prerm
@@ -0,0 +1,23 @@
+#!/bin/sh
+# vim: set noet ts=8:
+
+set -e
+
+case "$1" in
+    remove)
+	[ -x /sbin/stop ] && stop radosgw-all || true
+	invoke-rc.d radosgw stop || {
+	    RESULT=$?
+	    if [ $RESULT != 100 ]; then
+		exit $RESULT
+	    fi
+	}
+	;;
+
+    *)
+	;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- ceph-10.2.8.orig/debian/rbd-fuse.install
+++ ceph-10.2.8/debian/rbd-fuse.install
@@ -0,0 +1,2 @@
+usr/bin/rbd-fuse
+usr/share/man/man8/rbd-fuse.8
--- ceph-10.2.8.orig/debian/rbd-mirror.install
+++ ceph-10.2.8/debian/rbd-mirror.install
@@ -0,0 +1,2 @@
+usr/bin/rbd-mirror
+usr/share/man/man8/rbd-mirror.8
--- ceph-10.2.8.orig/debian/rbd-nbd.install
+++ ceph-10.2.8/debian/rbd-nbd.install
@@ -0,0 +1,2 @@
+usr/bin/rbd-nbd
+usr/share/man/man8/rbd-nbd.8
--- ceph-10.2.8.orig/debian/rules
+++ ceph-10.2.8/debian/rules
@@ -0,0 +1,214 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+export DH_VERBOSE=1
+export DESTDIR=$(CURDIR)/debian/tmp
+
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+  NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+  MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+export DEB_HOST_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+# Recommended snippet for Autoconf 2.52 or later
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+  confflags += --build $(DEB_HOST_GNU_TYPE)
+else
+  confflags += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
+endif
+
+export DEB_HOST_ARCH      ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+
+extraopts += --with-ocf --with-nss
+extraopts += --with-debug
+extraopts += --enable-cephfs-java
+
+# rocksdb is not packaged by anyone.  build it if we can.
+extraopts += --with-librocksdb-static=check
+
+ifeq ($(DEB_HOST_ARCH), armel)
+  # armel supports ARMv4t or above instructions sets.
+  # libatomic-ops is only usable with Ceph for ARMv6 or above.
+  extraopts += --without-libatomic-ops
+endif
+
+configure: configure-stamp
+configure-stamp:
+	dh_testdir
+	./autogen.sh
+	./configure --prefix=/usr --localstatedir=/var \
+	  --sysconfdir=/etc  --libexecdir=/usr/lib $(extraopts) $(confflags) \
+	  $(CEPH_EXTRA_CONFIGURE_ARGS)
+	touch $@
+
+build-arch: build
+build-indep: build
+
+build: build-stamp
+build-stamp: configure-stamp  
+	dh_testdir
+
+	$(MAKE)
+
+	cp src/init-ceph debian/ceph-base.ceph.init
+	cp src/init-radosgw debian/radosgw.init
+	cp src/logrotate.conf debian/ceph.logrotate
+
+	touch $@
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp configure-stamp
+
+	[ ! -f Makefile ] || $(MAKE) distclean
+	rm -f aclocal.m4 compile config.sub config.guess depcomp install-sh \
+	  ltmain.sh missing
+	rm -f configure Makefile.in man/Makefile.in src/Makefile.in
+	rm -f src/acconfig.h.in
+	rm -f debian/ceph-base.ceph.init debian/radosgw.init debian/ceph.logrotate debian/radosgw.logrotate
+
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k 
+	dh_installdirs
+
+	$(MAKE) DESTDIR=$(DESTDIR) install
+	sed -i "/dependency_libs/ s/'.*'/''/" `find . -name '*.la'`
+	install -D -m 644 udev/50-rbd.rules $(DESTDIR)/lib/udev/rules.d/50-rbd.rules
+	install -D -m 644 udev/95-ceph-osd.rules $(DESTDIR)/lib/udev/rules.d/95-ceph-osd.rules
+	install -D -m 644 udev/60-ceph-by-parttypeuuid.rules $(DESTDIR)/lib/udev/rules.d/60-ceph-by-parttypeuuid.rules
+	install -D -m 644 src/etc-rbdmap $(DESTDIR)/etc/ceph/rbdmap
+	install -D -m 755 src/init-rbdmap $(DESTDIR)/etc/init.d/rbdmap
+
+# Add here commands to install the package into debian/testpack.
+# Build architecture-independent files here.
+binary-indep: build install
+	dh_testdir
+	dh_testroot
+	jh_installlibs -v -i
+	dh_installchangelogs -i
+	dh_installdocs -i --all ChangeLog
+	dh_installexamples -i
+	dh_install -i --sourcedir=$(DESTDIR) --list-missing
+	dh_installman -i
+	dh_lintian -i
+	dh_link -i
+	dh_compress -i
+	dh_fixperms -i
+	dh_python2 -i
+	dh_installdeb -i
+	dh_gencontrol -i
+	dh_md5sums -i
+	dh_builddeb -i
+
+# We have nothing to do by default.
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs -a
+	dh_installdocs -a --all ChangeLog
+	dh_installexamples -a
+	dh_install -a --sourcedir=$(DESTDIR) --list-missing
+	install -d -m0755 debian/ceph-base/etc/logrotate.d
+	install -m0644 debian/ceph.logrotate debian/ceph-base/etc/logrotate.d
+
+	# dh_installinit is only set up to handle one upstart script
+	# per package, so do this ourselves
+	install -d -m0755 debian/ceph-base/etc/init
+	install -m0644 src/upstart/ceph-all.conf debian/ceph-base/etc/init
+	install -m0644 src/upstart/ceph-create-keys.conf debian/ceph-base/etc/init
+	install -d -m0755 debian/ceph-osd/etc/init
+	install -m0644 src/upstart/ceph-osd*.conf debian/ceph-osd/etc/init
+	install -m0644 src/upstart/ceph-disk.conf debian/ceph-osd/etc/init
+	install -d -m0755 debian/ceph-mon/etc/init
+	install -m0644 src/upstart/ceph-mon*.conf debian/ceph-mon/etc/init
+	install -d -m0755 debian/ceph-common/etc/init
+	install -m0644 src/upstart/rbdmap.conf debian/ceph-common/etc/init
+	install -d -m0755 debian/ceph-mds/etc/init
+	install -m0644 src/upstart/ceph-mds*.conf debian/ceph-mds/etc/init
+	install -d -m0755 debian/radosgw/etc/init
+	install -m0644 src/upstart/radosgw*.conf debian/radosgw/etc/init
+	install -d -m0755 debian/rbd-mirror/etc/init
+	install -m0644 src/upstart/ceph-rbd-mirror*.conf debian/rbd-mirror/etc/init
+	# install the systemd stuff manually since we have funny service names
+	install -d -m0755 debian/ceph-common/lib/systemd/system
+	install -m0644 systemd/ceph.target debian/ceph-common/lib/systemd/system
+	install -d -m0755 debian/ceph-common/etc/default
+	install -m0644 etc/default/ceph debian/ceph-common/etc/default/
+	install -d -m0755 debian/ceph-common/usr/lib/tmpfiles.d
+	install -m 0644 -D systemd/ceph.tmpfiles.d debian/ceph-common/usr/lib/tmpfiles.d/ceph.conf
+
+	install -d -m0755 debian/ceph-base/lib/systemd/system
+	install -d -m0755 debian/ceph-mon/lib/systemd/system
+	install -d -m0755 debian/ceph-osd/lib/systemd/system
+	install -m0644 systemd/ceph-mon@.service debian/ceph-mon/lib/systemd/system
+	install -m0644 systemd/ceph-create-keys@.service debian/ceph-base/lib/systemd/system
+	install -m0644 systemd/ceph-osd@.service debian/ceph-osd/lib/systemd/system
+	install -m0644 systemd/ceph-disk@.service debian/ceph-osd/lib/systemd/system
+	install -m0644 systemd/rbdmap.service debian/ceph-common/lib/systemd/system
+	sed -i s./etc/sysconfig/./etc/default/.g debian/ceph-mon/lib/systemd/system/ceph-mon@.service
+	sed -i s./etc/sysconfig/./etc/default/.g debian/ceph-base/lib/systemd/system/ceph-create-keys@.service
+	sed -i s./etc/sysconfig/./etc/default/.g debian/ceph-osd/lib/systemd/system/ceph-osd@.service
+	sed -i s./etc/sysconfig/./etc/default/.g debian/ceph-osd/lib/systemd/system/ceph-disk@.service
+	install -m0644 systemd/ceph-mon.target debian/ceph-mon/lib/systemd/system
+	install -m0644 systemd/ceph-osd.target debian/ceph-osd/lib/systemd/system
+
+	install -d -m0755 debian/ceph-mds/lib/systemd/system
+	install -m0644 systemd/ceph-mds@.service debian/ceph-mds/lib/systemd/system
+	sed -i s./etc/sysconfig/./etc/default/.g debian/ceph-mds/lib/systemd/system/ceph-mds@.service
+	install -m0644 systemd/ceph-mds.target debian/ceph-mds/lib/systemd/system
+
+	install -d -m0755 debian/radosgw/lib/systemd/system
+	install -m0644 systemd/ceph-radosgw@.service debian/radosgw/lib/systemd/system
+	sed -i s./etc/sysconfig/./etc/default/.g debian/radosgw/lib/systemd/system/ceph-radosgw@.service
+	install -m0644 systemd/ceph-radosgw.target debian/radosgw/lib/systemd/system
+
+	install -d -m0755 debian/rbd-mirror/lib/systemd/system
+	install -m0644 systemd/ceph-rbd-mirror@.service debian/rbd-mirror/lib/systemd/system
+	sed -i s./etc/sysconfig/./etc/default/.g debian/rbd-mirror/lib/systemd/system/ceph-rbd-mirror@.service
+	install -m0644 systemd/ceph-rbd-mirror.target debian/rbd-mirror/lib/systemd/system
+
+	dh_systemd_enable
+	dh_installinit -p ceph-base --name ceph --no-start
+	dh_installinit -p radosgw --no-start
+	dh_systemd_start --no-restart-on-upgrade
+
+	dh_installman -a
+	dh_lintian -a
+	dh_link -a
+
+	dh_strip -pceph-mds --dbg-package=ceph-mds-dbg
+	dh_strip -pceph-mon --dbg-package=ceph-mon-dbg
+	dh_strip -pceph-osd --dbg-package=ceph-osd-dbg
+	dh_strip -pceph-fuse --dbg-package=ceph-fuse-dbg
+	dh_strip -prbd-fuse --dbg-package=rbd-fuse-dbg
+	dh_strip -prbd-mirror --dbg-package=rbd-mirror-dbg
+	dh_strip -prbd-nbd --dbg-package=rbd-nbd-dbg
+	dh_strip -pceph-common --dbg-package=ceph-common-dbg
+	dh_strip -pceph-fs-common --dbg-package=ceph-fs-common-dbg
+	dh_strip -plibrados2 --dbg-package=librados2-dbg
+	dh_strip -plibradosstriper1 --dbg-package=libradosstriper1-dbg
+	dh_strip -plibrbd1 --dbg-package=librbd1-dbg
+	dh_strip -plibcephfs1 --dbg-package=libcephfs1-dbg
+	dh_strip -plibrgw2 --dbg-package=librgw2-dbg
+	dh_strip -pradosgw --dbg-package=radosgw-dbg
+	dh_strip -pceph-test --dbg-package=ceph-test-dbg
+
+	dh_compress -a
+	dh_fixperms -a
+	dh_makeshlibs -a
+	dh_python2 -a
+	dh_installdeb -a
+	dh_shlibdeps -a
+	dh_gencontrol -a
+	dh_md5sums -a
+	dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- ceph-10.2.8.orig/debian/source/format
+++ ceph-10.2.8/debian/source/format
@@ -0,0 +1 @@
+1.0
--- ceph-10.2.8.orig/debian/watch
+++ ceph-10.2.8/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://ceph.com/download/ceph-(\d.*)\.tar\.gz
