#! /usr/bin/atf-sh
#	$NetBSD: net_common.sh,v 1.32 2019/07/18 04:22:22 ozaki-r Exp $
#
# Copyright (c) 2016 Internet Initiative Japan Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

#
# Common utility functions for tests/net
#

HIJACKING="env LD_PRELOAD=/usr/lib/librumphijack.so \
    RUMPHIJACK=path=/rump,socket=all:nolocal,sysctl=yes"
ONEDAYISH="(23h5[0-9]m|1d0h0m)[0-9]+s ?"

extract_new_packets()
{
	local bus=$1
	local old=./.__old

	if [ ! -f $old ]; then
		old=/dev/null
	fi

	shmif_dumpbus -p - $bus 2>/dev/null |
	    tcpdump -n -e -r - 2>/dev/null > ./.__new
	diff -u $old ./.__new | grep '^+' | cut -d '+' -f 2   > ./.__diff
	mv -f ./.__new ./.__old
	cat ./.__diff
}

check_route()
{
	local target=$1
	local gw=$2
	local flags=${3:-\.\+}
	local ifname=${4:-\.\+}

	target=$(echo $target | sed 's/\./\\./g')
	if [ "$gw" = "" ]; then
		gw=".+"
	else
		gw=$(echo $gw | sed 's/\./\\./g')
	fi

	atf_check -s exit:0 -e ignore \
	    -o match:"^$target +$gw +$flags +- +- +.+ +$ifname" \
	    rump.netstat -rn
}

check_route_flags()
{

	check_route "$1" "" "$2" ""
}

check_route_gw()
{

	check_route "$1" "$2" "" ""
}

check_route_no_entry()
{
	local target=$(echo "$1" | sed 's/\./\\./g')

	atf_check -s exit:0 -e ignore -o not-match:"^$target" rump.netstat -rn
}

get_linklocal_addr()
{

	RUMP_SERVER=${1} rump.ifconfig ${2} inet6 |
	    awk "/fe80/ {sub(/%$2/, \"\"); sub(/\\/[0-9]*/, \"\"); print \$2;}"

	return 0
}

get_macaddr()
{

	RUMP_SERVER=${1} rump.ifconfig ${2} | awk '/address/ {print $2;}'
}

HTTPD_PID=./.__httpd.pid
start_httpd()
{
	local sock=$1
	local ip=$2
	local backup=$RUMP_SERVER

	export RUMP_SERVER=$sock

	# start httpd in daemon mode
	atf_check -s exit:0 env LD_PRELOAD=/usr/lib/librumphijack.so \
	    /usr/libexec/httpd -P $HTTPD_PID -i $ip -b -s $(pwd)

	export RUMP_SERVER=$backup

	sleep 3
}

stop_httpd()
{

	if [ -f $HTTPD_PID ]; then
		kill -9 $(cat $HTTPD_PID)
		rm -f $HTTPD_PID
		sleep 1
	fi
}

NC_PID=./.__nc.pid
start_nc_server()
{
	local sock=$1
	local port=$2
	local outfile=$3
	local proto=${4:-ipv4}
	local backup=$RUMP_SERVER
	local opts=

	export RUMP_SERVER=$sock

	if [ $proto = ipv4 ]; then
		opts="-l -4"
	else
		opts="-l -6"
	fi

	env LD_PRELOAD=/usr/lib/librumphijack.so nc $opts $port > $outfile &
	echo $! > $NC_PID

	if [ $proto = ipv4 ]; then
		$DEBUG && rump.netstat -a -f inet
	else
		$DEBUG && rump.netstat -a -f inet6
	fi

	export RUMP_SERVER=$backup

	sleep 1
}

stop_nc_server()
{

	if [ -f $NC_PID ]; then
		kill -9 $(cat $NC_PID)
		rm -f $NC_PID
		sleep 1
	fi
}

BASIC_LIBS="-lrumpnet -lrumpnet_net -lrumpnet_netinet -lrumpnet_shmif"
FS_LIBS="$BASIC_LIBS -lrumpdev -lrumpvfs -lrumpfs_ffs"
CRYPTO_LIBS="$BASIC_LIBS -lrumpdev -lrumpdev_opencrypto \
    -lrumpkern_z -lrumpkern_crypto"
NPF_LIBS="$BASIC_LIBS -lrumpdev -lrumpvfs -lrumpdev_bpf -lrumpnet_npf"
CRYPTO_NPF_LIBS="$CRYPTO_LIBS -lrumpvfs -lrumpdev_bpf -lrumpnet_npf"

# We cannot keep variables between test phases, so need to store in files
_rump_server_socks=./.__socks
_rump_server_ifaces=./.__ifaces
_rump_server_buses=./.__buses

DEBUG_SYSCTL_ENTRIES="net.inet.arp.debug net.inet6.icmp6.nd6_debug \
    net.inet.ipsec.debug"

IPSEC_KEY_DEBUG=${IPSEC_KEY_DEBUG:-false}

_rump_server_start_common()
{
	local sock=$1
	local backup=$RUMP_SERVER

	shift 1

	atf_check -s exit:0 rump_server "$@" "$sock"

	if $DEBUG; then
		# Enable debugging features in the kernel
		export RUMP_SERVER=$sock
		for ent in $DEBUG_SYSCTL_ENTRIES; do
			if rump.sysctl -q $ent; then
				atf_check -s exit:0 rump.sysctl -q -w $ent=1
			fi
		done
		export RUMP_SERVER=$backup
	fi
	if $IPSEC_KEY_DEBUG; then
		# Enable debugging features in the kernel
		export RUMP_SERVER=$sock
		if rump.sysctl -q net.key.debug; then
			atf_check -s exit:0 \
			    rump.sysctl -q -w net.key.debug=0xffff
		fi
		export RUMP_SERVER=$backup
	fi

	echo $sock >> $_rump_server_socks
	$DEBUG && cat $_rump_server_socks
}

rump_server_start()
{
	local sock=$1
	local lib=
	local libs="$BASIC_LIBS"

	shift 1

	for lib
	do
		libs="$libs -lrumpnet_$lib"
	done

	_rump_server_start_common $sock $libs

	return 0
}

rump_server_fs_start()
{
	local sock=$1
	local lib=
	local libs="$FS_LIBS"

	shift 1

	for lib
	do
		libs="$libs -lrumpnet_$lib"
	done

	_rump_server_start_common $sock $libs

	return 0
}

rump_server_crypto_start()
{
	local sock=$1
	local lib=
	local libs="$CRYPTO_LIBS"

	shift 1

	for lib
	do
		libs="$libs -lrumpnet_$lib"
	done

	_rump_server_start_common $sock $libs

	return 0
}

rump_server_npf_start()
{
	local sock=$1
	local lib=
	local libs="$NPF_LIBS"

	shift 1

	for lib
	do
		libs="$libs -lrumpnet_$lib"
	done

	_rump_server_start_common $sock $libs

	return 0
}

rump_server_crypto_npf_start()
{
	local sock=$1
	local lib=
	local libs="$CRYPTO_NPF_LIBS"

	shift 1

	for lib
	do
		libs="$libs -lrumpnet_$lib"
	done

	_rump_server_start_common $sock $libs

	return 0
}

rump_server_add_iface()
{
	local sock=$1
	local ifname=$2
	local bus=$3
	local backup=$RUMP_SERVER

	export RUMP_SERVER=$sock
	atf_check -s exit:0 rump.ifconfig $ifname create
	atf_check -s exit:0 rump.ifconfig $ifname linkstr $bus
	export RUMP_SERVER=$backup

	echo $sock $ifname >> $_rump_server_ifaces
	$DEBUG && cat $_rump_server_ifaces

	echo $bus >> $_rump_server_buses
	cat $_rump_server_buses |sort -u >./.__tmp
	mv -f ./.__tmp $_rump_server_buses
	$DEBUG && cat $_rump_server_buses

	return 0
}

rump_server_destroy_ifaces()
{
	local backup=$RUMP_SERVER
	local output=ignore

	$DEBUG && cat $_rump_server_ifaces

	# Try to dump states before destroying interfaces
	for sock in $(cat $_rump_server_socks); do
		export RUMP_SERVER=$sock
		if $DEBUG; then
			output=save:/dev/stdout
		fi
		atf_check -s exit:0 -o $output rump.ifconfig
		atf_check -s exit:0 -o $output rump.netstat -nr
		# XXX still need hijacking
		atf_check -s exit:0 -o $output $HIJACKING rump.netstat -nai
		atf_check -s exit:0 -o $output rump.arp -na
		atf_check -s exit:0 -o $output rump.ndp -na
		atf_check -s exit:0 -o $output $HIJACKING ifmcstat
	done

	# XXX using pipe doesn't work. See PR bin/51667
	#cat $_rump_server_ifaces | while read sock ifname; do
	while read sock ifname; do
		export RUMP_SERVER=$sock
		if rump.ifconfig -l |grep -q $ifname; then
			atf_check -s exit:0 rump.ifconfig $ifname destroy
		fi
		atf_check -s exit:0 -o ignore rump.ifconfig
	done < $_rump_server_ifaces
	export RUMP_SERVER=$backup

	return 0
}

rump_server_halt_servers()
{
	local backup=$RUMP_SERVER

	$DEBUG && cat $_rump_server_socks
	for sock in $(cat $_rump_server_socks); do
		env RUMP_SERVER=$sock rump.halt
	done
	export RUMP_SERVER=$backup

	return 0
}

extract_rump_server_core()
{

	if [ -f rump_server.core ]; then
		gdb -ex bt /usr/bin/rump_server rump_server.core
		# Extract kernel logs including a panic message
		strings rump_server.core |grep -E '^\[.+\] '
	fi
}

dump_kernel_stats()
{
	local sock=$1

	echo "### Dumping $sock"
	export RUMP_SERVER=$sock
	rump.ifconfig -av
	rump.netstat -nr
	# XXX still need hijacking
	$HIJACKING rump.netstat -nai
	rump.arp -na
	rump.ndp -na
	$HIJACKING ifmcstat
	$HIJACKING dmesg
}

rump_server_dump_servers()
{
	local backup=$RUMP_SERVER

	$DEBUG && cat $_rump_server_socks
	for sock in $(cat $_rump_server_socks); do
		dump_kernel_stats $sock
	done
	export RUMP_SERVER=$backup

	extract_rump_server_core
	return 0
}

rump_server_dump_buses()
{

	if [ ! -f $_rump_server_buses ]; then
		return 0
	fi

	$DEBUG && cat $_rump_server_buses
	for bus in $(cat $_rump_server_buses); do
		echo "### Dumping $bus"
		shmif_dumpbus -p - $bus 2>/dev/null| tcpdump -n -e -r -
	done
	return 0
}

cleanup()
{

	rump_server_halt_servers
}

dump()
{

	rump_server_dump_servers
	rump_server_dump_buses
}

skip_if_qemu()
{
	if sysctl machdep.cpu_brand 2>/dev/null | grep QEMU >/dev/null 2>&1
	then
	    atf_skip "unreliable under qemu, skip until PR kern/43997 fixed"
	fi
}

test_create_destroy_common()
{
	local sock=$1
	local ifname=$2
	local test_address=${3:-false}
	local ipv4="10.0.0.1/24"
	local ipv6="fc00::1"

	export RUMP_SERVER=$sock

	atf_check -s exit:0 rump.ifconfig $ifname create
	atf_check -s exit:0 rump.ifconfig $ifname destroy

	atf_check -s exit:0 rump.ifconfig $ifname create
	atf_check -s exit:0 rump.ifconfig $ifname up
	atf_check -s exit:0 rump.ifconfig $ifname down
	atf_check -s exit:0 rump.ifconfig $ifname destroy

	# Destroy while UP
	atf_check -s exit:0 rump.ifconfig $ifname create
	atf_check -s exit:0 rump.ifconfig $ifname up
	atf_check -s exit:0 rump.ifconfig $ifname destroy

	if ! $test_address; then
		return
	fi

	# With an IPv4 address
	atf_check -s exit:0 rump.ifconfig $ifname create
	atf_check -s exit:0 rump.ifconfig $ifname inet $ipv4
	atf_check -s exit:0 rump.ifconfig $ifname up
	atf_check -s exit:0 rump.ifconfig $ifname destroy

	# With an IPv6 address
	atf_check -s exit:0 rump.ifconfig $ifname create
	atf_check -s exit:0 rump.ifconfig $ifname inet6 $ipv6
	atf_check -s exit:0 rump.ifconfig $ifname up
	atf_check -s exit:0 rump.ifconfig $ifname destroy

	unset RUMP_SERVER
}
#	$NetBSD: t_vlan.sh,v 1.15.2.1 2019/11/13 12:50:30 martin Exp $
#
# Copyright (c) 2016 Internet Initiative Japan Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

BUS=bus
SOCK_LOCAL=unix://commsock1
SOCK_REMOTE=unix://commsock2
IP_LOCAL0=10.0.0.1
IP_LOCAL1=10.0.1.1
IP_REMOTE0=10.0.0.2
IP_REMOTE1=10.0.1.2
IP_MCADDR0=224.0.0.10
IP6_LOCAL0=fc00::1
IP6_LOCAL1=fc00:1::1
IP6_REMOTE0=fc00::2
IP6_REMOTE1=fc00:1::2
IP6_MCADDR0=ff11::10
ETH_IP_MCADDR0=01:00:5e:00:00:0a
ETH_IP6_MCADDR0=33:33:00:00:00:10

DEBUG=${DEBUG:-false}

vlan_create_destroy_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"

	export RUMP_SERVER=${SOCK_LOCAL}

	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 destroy

	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 up
	$atf_ifconfig vlan0 down
	$atf_ifconfig vlan0 destroy

	$atf_ifconfig shmif0 create
	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 1 vlanif shmif0
	$atf_ifconfig vlan0 up
	$atf_ifconfig vlan0 destroy

	# more than one vlan interface with a same parent interface
	$atf_ifconfig shmif1 create
	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan1 create
	$atf_ifconfig vlan1 vlan 11 vlanif shmif0

	# more than one interface with another parent interface
	$atf_ifconfig vlan2 create
	$atf_ifconfig vlan2 vlan 12 vlanif shmif1
	$atf_ifconfig vlan3 create
	$atf_ifconfig vlan3 vlan 13 vlanif shmif1
	$atf_ifconfig shmif0 destroy
	atf_check -s exit:0 -o not-match:'shmif0' rump.ifconfig vlan0
	atf_check -s exit:0 -o not-match:'shmif0' rump.ifconfig vlan1
	atf_check -s exit:0 -o match:'shmif1' rump.ifconfig vlan2
	atf_check -s exit:0 -o match:'shmif1' rump.ifconfig vlan3
	$atf_ifconfig vlan0 destroy
	$atf_ifconfig vlan1 destroy
	$atf_ifconfig vlan2 destroy
	$atf_ifconfig vlan3 destroy

}

atf_test_case vlan_create_destroy cleanup
vlan_create_destroy_head()
{

	atf_set "descr" "tests of creation and deletion of vlan interface"
	atf_set "require.progs" "rump_server"
}

vlan_create_destroy_body()
{
	rump_server_start $SOCK_LOCAL vlan

	vlan_create_destroy_body_common
}


vlan_create_destroy_cleanup()
{

	$DEBUG && dump
	cleanup
}

atf_test_case vlan_create_destroy6 cleanup
vlan_create_destroy6_head()
{

	atf_set "descr" "tests of creation and deletion of vlan interface with IPv6"
	atf_set "require.progs" "rump_server"
}

vlan_create_destroy6_body()
{

	rump_server_start $SOCK_LOCAL vlan netinet6

	vlan_create_destroy_body_common
}

vlan_create_destroy6_cleanup()
{

	$DEBUG && dump
	cleanup
}

vlan_basic_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"
	local outfile=./out
	local af=inet
	local prefix=24
	local local0=$IP_LOCAL0
	local remote0=$IP_REMOTE0
	local ping_cmd="rump.ping -n -w 1 -c 1"

	if [ x"$1" = x"inet6" ]; then
		af="inet6"
		prefix=64
		local0=$IP6_LOCAL0
		remote0=$IP6_REMOTE0
		ping_cmd="rump.ping6 -n -c 1"
	fi

	rump_server_add_iface $SOCK_LOCAL shmif0 $BUS
	rump_server_add_iface $SOCK_REMOTE shmif0 $BUS

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig shmif0 up
	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig shmif0 up

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $local0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig -w 10

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $remote0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig -w 10

	extract_new_packets $BUS > $outfile

	export RUMP_SERVER=$SOCK_LOCAL
	atf_check -s exit:0 -o ignore $ping_cmd $remote0

	extract_new_packets $BUS > $outfile
	atf_check -s exit:0 -o match:'vlan 10' cat $outfile

	$atf_ifconfig vlan0 -vlanif
	$atf_ifconfig vlan0 vlan 20 vlanif shmif0
	$atf_ifconfig vlan0 $af $local0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig -w 10

	extract_new_packets $BUS > $outfile
	atf_check -s not-exit:0 -o ignore $ping_cmd $remote0

	extract_new_packets $BUS > $outfile
	atf_check -s exit:0 -o match:'vlan 20' cat $outfile

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig vlan0 -vlanif
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $local0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig -w 10

	atf_check -s exit:0 -o ignore rump.ifconfig -z vlan0
	atf_check -s exit:0 -o ignore $ping_cmd $remote0
	rump.ifconfig -v vlan0 > $outfile

	atf_check -s exit:0 -o not-match:' 0 packets' cat $outfile
	atf_check -s exit:0 -o not-match:' 0 bytes' cat $outfile
}

atf_test_case vlan_basic cleanup
vlan_basic_head()
{

	atf_set "descr" "tests of communications over vlan interfaces"
	atf_set "require.progs" "rump_server"
}

vlan_basic_body()
{
	rump_server_start $SOCK_LOCAL vlan
	rump_server_start $SOCK_REMOTE vlan

	vlan_basic_body_common inet

}

vlan_basic_cleanup()
{

	$DEBUG && dump
	cleanup
}

atf_test_case vlan_basic6 cleanup
vlan_basic6_head()
{

	atf_set "descr" "tests of communications over vlan interfaces using IPv6"
	atf_set "require.progs" "rump_server"
}

vlan_basic6_body()
{
	rump_server_start $SOCK_LOCAL vlan netinet6
	rump_server_start $SOCK_REMOTE vlan netinet6

	vlan_basic_body_common inet6
}

vlan_basic6_cleanup()
{

	$DEBUG && dump
	cleanup
}

vlan_auto_follow_mtu_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"
	local outfile=./out
	local af=inet
	local prefix=24
	local local0=$IP_LOCAL0
	local remote0=$IP_REMOTE0
	local ping_cmd="rump.ping -D -n -w 1 -c 1"
	local mtu=1500
	local vlan_mtu=`expr $mtu - 4`
	# ipv4 header=20bytes, icmp header=8bytes
	local padding=`expr $vlan_mtu - 20 - 8`
	local over_padding=`expr $vlan_mtu - 20 - 8 + 1`
	local nonfrag_msg="$local0 > $remote0: ICMP echo request"
	# unused for ipv4
	local frag_msg=""

	if [ x"$1" = x"inet6" ]; then
		af="inet6"
		prefix=64
		local0=$IP6_LOCAL0
		remote0=$IP6_REMOTE0
		# ipv6 header=40bytes, icmpv6 header=8bytes
		padding=`expr $vlan_mtu - 40 - 8`
		over_padding=`expr $vlan_mtu - 40 - 8 + 1`
		ping_cmd="rump.ping6 -mm -n -c 1 -i 1"
		nonfrag_msg="$local0 > $remote0: ICMP6, echo request"
		frag_msg="$local0 > $remote0: frag .* ICMP6, echo request"
	fi

	rump_server_add_iface $SOCK_LOCAL shmif0 $BUS
	rump_server_add_iface $SOCK_REMOTE shmif0 $BUS

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig shmif0 up
	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig shmif0 up

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig vlan0 create

	# since upper bound of shmif's mtu is 1500,
	# so we lower vlan's mtu instead of raising shmif's.
	# to do this, we change the interface's parameter
	# such as ND_IFINFO(ifp)->maxmtu that is changed by SIOCSIFMTU.

	# $atf_config shmif0 mtu 1600
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 mtu 1400
	$atf_ifconfig vlan0 -vlanif shmif0

	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $local0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig -w 10

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $remote0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig -w 10

	extract_new_packets $BUS > $outfile
	export RUMP_SERVER=$SOCK_LOCAL

	atf_check -s exit:0 -o ignore $ping_cmd -s $padding $remote0
	extract_new_packets $BUS > $outfile
	atf_check -s exit:0 -o match:"$nonfrag_msg" cat $outfile

	if [ x"$1" = x"inet6" ]; then
		atf_check -s exit:0 -o ignore $ping_cmd -s $over_padding $remote0
		extract_new_packets $BUS > $outfile
		atf_check -s exit:0 -o match:"$frag_msg" cat $outfile
	else
		atf_check -s not-exit:0 -o ignore -e match:"Message too long" \
				$ping_cmd -s $over_padding $remote0
	fi
}

atf_test_case vlan_auto_follow_mtu cleanup
vlan_auto_follow_mtu_head()
{

	atf_set "descr" "tests of setting vlan mtu using IPv4"
	atf_set "require.progs" "rump_server"
}

vlan_auto_follow_mtu_body()
{
	rump_server_start $SOCK_LOCAL vlan
	rump_server_start $SOCK_REMOTE vlan

	vlan_auto_follow_mtu_body_common inet
}

vlan_auto_follow_mtu_cleanup()
{

	$DEBUG && dump
	cleanup
}

atf_test_case vlan_auto_follow_mtu6 cleanup
vlan_auto_follow_mtu6_head()
{

	atf_set "descr" "tests of setting vlan mtu using IPv6"
	atf_set "require.progs" "rump_server"
}

vlan_auto_follow_mtu6_body()
{
	rump_server_start $SOCK_LOCAL vlan netinet6
	rump_server_start $SOCK_REMOTE vlan netinet6

	vlan_auto_follow_mtu_body_common inet6
}

vlan_auto_follow_mtu6_cleanup()
{

	$DEBUG && dump
	cleanup
}

vlanid_config_and_ping()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"
	local vlanid=$1
	shift

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig vlan0 vlan $vlanid vlanif shmif0
	$atf_ifconfig vlan0 $IP_LOCAL0/24
	$atf_ifconfig vlan0 up

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 vlan $vlanid vlanif shmif0
	$atf_ifconfig vlan0 $IP_REMOTE0/24
	$atf_ifconfig vlan0 up

	export RUMP_SERVER=$SOCK_LOCAL
	atf_check -s exit:0 -o ignore rump.ping -n -w 1 -c 1 $IP_REMOTE0
	$atf_ifconfig vlan0 -vlanif

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 -vlanif
}

vlanid_config_and_ping6()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"
	local vlanid=$1
	shift

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig vlan0 vlan $vlanid vlanif shmif0
	$atf_ifconfig vlan0 inet6 $IP6_LOCAL0/64
	$atf_ifconfig vlan0 up

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 vlan $vlanid vlanif shmif0
	$atf_ifconfig vlan0 inet6 $IP6_REMOTE0/64
	$atf_ifconfig vlan0 up

	export RUMP_SERVER=$SOCK_LOCAL
	atf_check -s exit:0 -o ignore rump.ping6 -n -c 1 $IP6_REMOTE0
	$atf_ifconfig vlan0 -vlanif

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 -vlanif
}

vlan_vlanid_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"
	local af=inet
	local prefix=24
	local sysctl_param="net.inet.ip.dad_count=0"
	local ping_cmd="rump.ping -n -w 1 -c 1"
	local config_and_ping=vlanid_config_and_ping
	local local0=$IP_LOCAL0
	local local1=$IP_LOCAL1
	local remote0=$IP_REMOTE0
	local remote1=$IP_REMOTE1

	if [ x"$1" = x"inet6" ]; then
		af=inet6
		prefix=64
		sysctl_param="net.inet6.ip6.dad_count=0"
		ping_cmd="rump.ping6 -n -c 1"
		config_and_ping=vlanid_config_and_ping6
		local0=$IP6_LOCAL0
		local1=$IP6_LOCAL1
		remote0=$IP6_REMOTE0
		remote1=$IP6_REMOTE1
	fi

	rump_server_add_iface $SOCK_LOCAL shmif0 $BUS
	rump_server_add_iface $SOCK_REMOTE shmif0 $BUS

	export RUMP_SERVER=$SOCK_LOCAL
	atf_check -s exit:0 -o ignore rump.sysctl -w $sysctl_param
	$atf_ifconfig shmif0 up
	$atf_ifconfig vlan0 create

	export RUMP_SERVER=$SOCK_REMOTE
	atf_check -s exit:0 -o ignore rump.sysctl -w $sysctl_param
	$atf_ifconfig shmif0 up
	$atf_ifconfig vlan0 create

	export RUMP_SERVER=$SOCK_LOCAL
	atf_check -s not-exit:0 -e match:"^usage: rump.ifconfig" \
	    rump.ifconfig vlan0 vlan -1 vlanif shmif0

	# $config_and_ping 0 # reserved vlan id
	$config_and_ping 1
	$config_and_ping 4094
	# $config_and_ping 4095 #reserved vlan id

	if [ "${RANDOM:-0}" != "${RANDOM:-0}" ]
	then
		for TAG in $(( ${RANDOM:-0} % 4092 + 2 )) \
			   $(( ${RANDOM:-0} % 4092 + 2 )) \
			   $(( ${RANDOM:-0} % 4092 + 2 ))
		do
			$config_and_ping "${TAG}"
		done
	fi

	export RUMP_SERVER=$SOCK_LOCAL
	for TAG in 0 4095 4096 $((4096*4 + 1)) 65536 65537 $((65536 + 4095))
	do
		atf_check -s not-exit:0 -e not-empty \
		    rump.ifconfig vlan0 vlan "${TAG}" vlanif shmif0
	done

	$atf_ifconfig vlan0 vlan 1 vlanif shmif0
	atf_check -s not-exit:0 -e match:"SIOCSETVLAN: Device busy" \
	    rump.ifconfig vlan0 vlan 2 vlanif shmif0

	atf_check -s not-exit:0 -e match:"SIOCSETVLAN: Device busy" \
	    rump.ifconfig vlan0 vlan 1 vlanif shmif1

	$atf_ifconfig vlan0 -vlanif
	atf_check -s not-exit:0 -e match:"Invalid argument" \
	    rump.ifconfig vlan0 $af $local0/$prefix

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $local0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig vlan1 create
	$atf_ifconfig vlan1 vlan 11 vlanif shmif0
	$atf_ifconfig vlan1 $af $local1/$prefix
	$atf_ifconfig vlan1 up

	export RUMP_SERVER=$SOCK_REMOTE
	$atf_ifconfig vlan0 -vlanif
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $remote0/$prefix
	$atf_ifconfig vlan0 up
	$atf_ifconfig vlan1 create
	$atf_ifconfig vlan1 vlan 11 vlanif shmif0
	$atf_ifconfig vlan1 $af $remote1/$prefix
	$atf_ifconfig vlan1 up

	export RUMP_SERVER=$SOCK_LOCAL
	atf_check -s exit:0 -o ignore $ping_cmd $remote0
	atf_check -s exit:0 -o ignore $ping_cmd $remote1
}

atf_test_case vlan_vlanid cleanup
vlan_vlanid_head()
{

	atf_set "descr" "tests of configuration for vlan id"
	atf_set "require.progs" "rump_server"
}

vlan_vlanid_body()
{
	rump_server_start $SOCK_LOCAL vlan
	rump_server_start $SOCK_REMOTE vlan

	vlan_vlanid_body_common inet
}

vlan_vlanid_cleanup()
{

	$DEBUG && dump
	cleanup
}

atf_test_case vlan_vlanid6 cleanup
vlan_vlanid6_head()
{

	atf_set "descr" "tests of configuration for vlan id using IPv6"
	atf_set "require.progs" "rump_server"
}


vlan_vlanid6_body()
{
	rump_server_start $SOCK_LOCAL vlan netinet6
	rump_server_start $SOCK_REMOTE vlan netinet6

	vlan_vlanid_body_common inet6
}

vlan_vlanid6_cleanup()
{

	$DEBUG && dump
	cleanup
}

vlan_configs_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"

	export RUMP_SERVER=${SOCK_LOCAL}

	$atf_ifconfig shmif0 create
	$atf_ifconfig shmif1 create
	# unset U/L bit to detect a bug fixed by if_vlan.c:r1.132
	$atf_ifconfig shmif0 link b0:a0:75:00:01:00 active
	$atf_ifconfig shmif1 link b0:a0:75:00:01:01 active
	$atf_ifconfig vlan0 create

	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 -vlanif

	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 -vlanif shmif0

	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	atf_check -s exit:0 rump.ifconfig vlan0 -vlanif shmif1
	atf_check -s exit:0 rump.ifconfig vlan0 -vlanif shmif2

	$atf_ifconfig vlan0 -vlanif

	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	atf_check -s exit:0 -e match:'Invalid argument' \
	    rump.ifconfig vlan0 mtu 1497
	$atf_ifconfig vlan0 mtu 1496
	$atf_ifconfig vlan0 mtu 42
	atf_check -s exit:0 -e match:'Invalid argument' \
	    rump.ifconfig vlan0 mtu 41
	$atf_ifconfig vlan0 -vlanif

	$atf_ifconfig vlan1 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	atf_check -s not-exit:0 -e match:'File exists' \
	    rump.ifconfig vlan1 vlan 10 vlanif shmif0
	$atf_ifconfig vlan1 vlan 10 vlanif shmif1

	$atf_ifconfig vlan1 -vlanif shmif1
	$atf_ifconfig vlan1 vlan 10 vlanif shmif1

	$atf_ifconfig vlan0 -vlanif shmif0
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
}

atf_test_case vlan_configs cleanup
vlan_configs_head()
{
	atf_set "descr" "tests of configuration except vlan id"
	atf_set "require.progs" "rump_server"
}

vlan_configs_body()
{

	rump_server_start $SOCK_LOCAL vlan

	vlan_configs_body_common

}

vlan_configs_cleanup()
{

	$DEBUG && dump
	cleanup
}

atf_test_case vlan_configs6 cleanup
vlan_configs6_head()
{
	atf_set "descr" "tests of configuration except vlan id using IPv6"
	atf_set "require.progs" "rump_server"
}

vlan_configs6_body()
{
	rump_server_start $SOCK_LOCAL vlan netinet6

	vlan_configs_body_common
}

vlan_configs6_cleanup()
{
	$DEBUG && dump
	cleanup
}

vlan_bridge_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"

	rump_server_add_iface $SOCK_LOCAL shmif0 $BUS

	export RUMP_SERVER=$SOCK_LOCAL
	$atf_ifconfig shmif0 up

	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 up
	$DEBUG && rump.ifconfig vlan0

	$atf_ifconfig bridge0 create
	# Adjust to the MTU of a vlan on a shmif
	$atf_ifconfig bridge0 mtu 1496
	$atf_ifconfig bridge0 up
	# Test brconfig add
	atf_check -s exit:0 $HIJACKING brconfig bridge0 add vlan0
	$DEBUG && brconfig bridge0
	# Test brconfig delete
	atf_check -s exit:0 $HIJACKING brconfig bridge0 delete vlan0

	atf_check -s exit:0 $HIJACKING brconfig bridge0 add vlan0
	# Test vlan destruction with bridge
	$atf_ifconfig vlan0 destroy

	rump_server_destroy_ifaces
}

atf_test_case vlan_bridge cleanup
vlan_bridge_head()
{

	atf_set "descr" "tests of vlan interfaces with bridges (IPv4)"
	atf_set "require.progs" "rump_server"
}

vlan_bridge_body()
{

	rump_server_start $SOCK_LOCAL vlan bridge
	vlan_bridge_body_common
}

vlan_bridge_cleanup()
{

	$DEBUG && dump
	cleanup
}

atf_test_case vlan_bridge6 cleanup
vlan_bridge6_head()
{

	atf_set "descr" "tests of vlan interfaces with bridges (IPv6)"
	atf_set "require.progs" "rump_server"
}

vlan_bridge6_body()
{

	rump_server_start $SOCK_LOCAL vlan netinet6 bridge
	vlan_bridge_body_common
}

vlan_bridge6_cleanup()
{

	$DEBUG && dump
	cleanup
}

vlan_multicast_body_common()
{
	local atf_ifconfig="atf_check -s exit:0 rump.ifconfig"
	local af="inet"
	local local0=$IP_LOCAL0
	local local1=$IP_LOCAL1
	local mcaddr=$IP_MCADDR0
	local eth_mcaddr=$ETH_IP_MCADDR0
	local prefix=24
	local siocXmulti="$(atf_get_srcdir)/siocXmulti"
	local atf_siocXmulti="atf_check -s exit:0 $HIJACKING $siocXmulti"

	if [ x"$1" =  x"inet6" ]; then
		af="inet6"
		prefix=64
		local0=$IP6_LOCAL0
		local1=$IP6_LOCAL1
		mcaddr=$IP6_MCADDR0
		eth_mcaddr=$ETH_IP6_MCADDR0
	fi

	export RUMP_SERVER=$SOCK_LOCAL

	$atf_ifconfig shmif0 create
	$atf_ifconfig shmif0 linkstr net0 up
	$atf_ifconfig vlan0 create
	$atf_ifconfig vlan0 vlan 10 vlanif shmif0
	$atf_ifconfig vlan0 $af $local0/$prefix up
	$atf_ifconfig vlan1 create
	$atf_ifconfig vlan1 vlan 11 vlanif shmif0
	$atf_ifconfig vlan1 $af $local1/$prefix up
	$atf_ifconfig -w 10

	# check the initial state
	atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat

	# add a multicast address
	$atf_siocXmulti add vlan0 $mcaddr
	atf_check -s exit:0 -o match:"$eth_mcaddr" $HIJACKING ifmcstat

	# delete the address
	$atf_siocXmulti del vlan0 $mcaddr
	atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat

	# delete a non-existing address
	atf_check -s not-exit:0 -e match:"Invalid argument" \
	    $HIJACKING $siocXmulti del vlan0 $mcaddr

	# add an address to different interfaces
	$atf_siocXmulti add vlan0 $mcaddr
	$atf_siocXmulti add vlan1 $mcaddr
	atf_check -s exit:0 -o match:"${eth_mcaddr}: 2" $HIJACKING ifmcstat
	$atf_siocXmulti del vlan0 $mcaddr

	# delete the address with invalid interface
	atf_check -s not-exit:0 -e match:"Invalid argument" \
	    $HIJACKING $siocXmulti del vlan0 $mcaddr

	$atf_siocXmulti del vlan1 $mcaddr

	# add and delete a same address more than once
	$atf_siocXmulti add vlan0 $mcaddr
	$atf_siocXmulti add vlan0 $mcaddr
	$atf_siocXmulti add vlan0 $mcaddr
	atf_check -s exit:0 -o match:"${eth_mcaddr}: 3" $HIJACKING ifmcstat
	$atf_siocXmulti del vlan0 $mcaddr
	$atf_siocXmulti del vlan0 $mcaddr
	$atf_siocXmulti del vlan0 $mcaddr
	atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat

	# delete all address added to parent device when remove
	# the config of parent interface
	$atf_siocXmulti add vlan0 $mcaddr
	$atf_siocXmulti add vlan0 $mcaddr
	$atf_siocXmulti add vlan0 $mcaddr
	$atf_ifconfig vlan0 -vlanif shmif0
	atf_check -s exit:0 -o not-match:"$eth_mcaddr" $HIJACKING ifmcstat
}

atf_test_case vlan_multicast cleanup
vlan_multicast_head()
{
	atf_set "descr" "tests of multicast address adding and deleting"
	atf_set "require.progs" "rump_server"
}

vlan_multicast_body()
{
	rump_server_start $SOCK_LOCAL vlan

	vlan_multicast_body_common inet
}

vlan_multicast_cleanup()
{
	$DEBUG && dump
	cleanup
}

atf_test_case vlan_multicast6 cleanup
vlan_multicast6_head()
{
	atf_set "descr" "tests of multicast address adding and deleting with IPv6"
	atf_set "require.progs" "rump_server"
}

vlan_multicast6_body()
{
	rump_server_start $SOCK_LOCAL vlan netinet6

	vlan_multicast_body_common inet6
}

vlan_multicast6_cleanup()
{
	$DEBUG && dump
	cleanup
}

atf_init_test_cases()
{

	atf_add_test_case vlan_create_destroy
	atf_add_test_case vlan_basic
	atf_add_test_case vlan_auto_follow_mtu
	atf_add_test_case vlan_vlanid
	atf_add_test_case vlan_configs
	atf_add_test_case vlan_bridge
	atf_add_test_case vlan_multicast

	atf_add_test_case vlan_create_destroy6
	atf_add_test_case vlan_basic6
	atf_add_test_case vlan_auto_follow_mtu6
	atf_add_test_case vlan_vlanid6
	atf_add_test_case vlan_configs6
	atf_add_test_case vlan_bridge6
	atf_add_test_case vlan_multicast6
}
