_________ SWAT MAGAZINE ISSUE EIGHTEEN: JUNE 1999 __________ / \___________________________________________/ \ / .Hex-palm (Another Napalm mixture). \ / By -=The Firestarter=- \ ----------------------------------------------------------------------- Once again me and a few other team members have been constructing more highly flamable fuels and gels, "So what is it this time?" I hear you cry, well quite simply another Napalm mixture. Ok for this one you will need: 1 part motor oil 10 parts Petrol 3 parts Hexemethalene blocks shit loads of polystyrene (depends on how you think you want the mixture) 1) Mix your oil and petrol, make sure that it is well mixed before you head onto the next stage. 2) Add about half of your polystyrene, Mix it in well. 3) Crush up your Hexemethalene blocks into a fine powder and mix this in with your Naplam mixture. 4) Add the rest of your polystyrene. 5) Mix well. That's in, quite simple. So what makes this better than normal napalm? The Hexemethalene in the naplam help to keep it alight, normally the Hexy blocks take ages to light, but as a fine powder it burns fairly rapidly, giving off a fizzing sound. At first it will burn more violently than usual, this gives off more heat, once a lot of the hexy has burned away it will continue to burn at a normal rate but with a slightly more violent nature (although it's hard to tell the difference). That's just about it really, it helps to cause fires faster than normal naplam, and it burns for longer (by a few minutes). Anyway have fun with this. Note: You can try and substitute firelighters for Hexemethalene blocks but this might not be as effective. Fun uses: Well this was made by us for one reason (and on the spure of the moment), to cause bean cans to explode faster than usual. Ok as lame as it sounds, if you stick a bean can in a large pile of this stuff and light it (maybe down a street or somewhere like that), then the aftermath is always good for a few laughs. HAVE PHUN