###
### Sun Aug 7 13:27:33 EDT 2005:
### /usr/pkg/bin/bmake bulk-package for openobex-1.0.1nb1
### Current pkg count: 1 installed packages: digest-20050323
###
BULK> Full rebuild in progress...
BULK> Cleaning package openobex-1.0.1nb1 and pre-requisite packages
===> Cleaning for openobex-1.0.1nb1
===> Cleaning for gmake-3.80nb4
===> Cleaning for gettext-lib-0.11.5nb4
===> Cleaning for libiconv-1.9.2nb1
===> Cleaning for libtool-base-1.5.18nb3
===> Cleaning for pkg_install-info-4.5nb3
BULK> Removing installed packages which are not needed to build openobex-1.0.1nb1
BULK> Keeping BULK_PREREQ: digest-20050323 (pkgtools/digest)
BULK> Installing packages which are required to build openobex-1.0.1nb1.
BULK> /usr/pkg/sbin/pkg_add -K /var/db/pkg /packages/SunOS-5.8/sparc/All/gmake-3.80nb4.tgz
===========================================================================
Installing files needed by libiconv-1.9.2nb1:
/usr/pkg/lib/charset.alias
[/usr/pkg/share/examples/libiconv/charset.alias]
===========================================================================
BULK> Required package gettext-lib-0.11.5nb4 (devel/gettext-lib) is already installed
BULK> Required package libiconv-1.9.2nb1 (converters/libiconv) is already installed
BULK> /usr/pkg/sbin/pkg_add -K /var/db/pkg /packages/SunOS-5.8/sparc/All/libtool-base-1.5.18nb3.tgz
BULK> Required package pkg_install-info-4.5nb3 (pkgtools/pkg_install-info) is already installed
BULK> Required package digest-20050323 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (openobex-1.0.1nb1)
===> Checking for vulnerabilities in openobex-1.0.1nb1
=> Checksum SHA1 OK for openobex-1.0.1.tar.gz.
=> Checksum RMD160 OK for openobex-1.0.1.tar.gz.
work -> /pkgobj/comms/openobex/work
===> Extracting for openobex-1.0.1nb1
===> Required installed package libtool-base>=1.5.18nb1: libtool-base-1.5.18nb3 found
===> Required installed package gmake>=3.78: gmake-3.80nb4 found
===> Patching for openobex-1.0.1nb1
===> Overriding tools for openobex-1.0.1nb1
===> Creating toolchain wrappers for openobex-1.0.1nb1
===> Configuring for openobex-1.0.1nb1
creating cache ./config.cache
checking host system type... sparc-sun-solaris2
checking target system type... sparc-sun-solaris2
checking build system type... sparc-sun-solaris2
checking host system type... sparc-sun-solaris2
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... cc
checking whether the C compiler (cc -O -Wl,-R/usr/pkg/lib) works... yes
checking whether the C compiler (cc -O -Wl,-R/usr/pkg/lib) is a cross-compiler... no
checking whether we are using GNU C... no
checking whether cc accepts -g... yes
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking for Cygwin environment... no
checking for mingw32 environment... no
checking how to run the C preprocessor... cc -E
checking for non-GNU ld... /pkgobj/comms/openobex/work/.wrapper/bin/ld
checking if the linker (/pkgobj/comms/openobex/work/.wrapper/bin/ld) is GNU ld... no
checking for /pkgobj/comms/openobex/work/.wrapper/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/ccs/bin/nm -p
checking for a sed that does not truncate output... /usr/pkg/bin/nbsed
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for object suffix... o
checking for executable suffix... no
checking command to parse /usr/ccs/bin/nm -p output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -KPIC
checking if cc PIC flag -KPIC works... yes
checking if cc static flag -Bstatic works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking whether the linker (/pkgobj/comms/openobex/work/.wrapper/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking dynamic linker characteristics... solaris2 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
checking for IrDA support... no
checking for Bluetooth support... no
updating cache ./config.cache
creating ./config.status
creating Makefile
creating m4macros/Makefile
creating src/Makefile
creating doc/Makefile
creating openobex-config
creating config.h
===> Building for openobex-1.0.1nb1
cd . \
&& CONFIG_FILES=Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating Makefile
cd . && autoheader
WARNING: `autoheader' is missing on your system. You should only need it if
you modified `acconfig.h' or `configure.in'. You might want
to install the `Autoconf' and `GNU m4' packages. Grab them
from any GNU archive site.
cd . \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
/bin/ksh ./config.status
creating config.h
config.h is unchanged
/usr/pkg/bin/gmake all-recursive
gmake[1]: Entering directory `/pkgobj/comms/openobex/work/openobex-1.0.1'
Making all in m4macros
gmake[2]: Entering directory `/pkgobj/comms/openobex/work/openobex-1.0.1/m4macros'
cd .. \
&& CONFIG_FILES=m4macros/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating m4macros/Makefile
gmake[2]: Leaving directory `/pkgobj/comms/openobex/work/openobex-1.0.1/m4macros'
gmake[2]: Entering directory `/pkgobj/comms/openobex/work/openobex-1.0.1/m4macros'
gmake[2]: Nothing to be done for `all'.
gmake[2]: Leaving directory `/pkgobj/comms/openobex/work/openobex-1.0.1/m4macros'
Making all in src
gmake[2]: Entering directory `/pkgobj/comms/openobex/work/openobex-1.0.1/src'
cd .. \
&& CONFIG_FILES=src/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating src/Makefile
gmake[2]: Leaving directory `/pkgobj/comms/openobex/work/openobex-1.0.1/src'
gmake[2]: Entering directory `/pkgobj/comms/openobex/work/openobex-1.0.1/src'
/bin/ksh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -I../src -O2 -c obex.c
mkdir .libs
cc -DHAVE_CONFIG_H -I. -I.. -I../src -O2 -c obex.c -KPIC -DPIC -o .libs/obex.o
"obex_const.h", line 33: cannot find include file:
"netbuf.h", line 40: cannot find include file:
"obex.c", line 106: warning: implicit function declaration: malloc
"obex.c", line 106: warning: improper pointer/integer combination: op "="
"obex.c", line 155: warning: implicit function declaration: free
"obex.c", line 258: warning: argument mismatch
"obex.c", line 296: warning: argument mismatch
"obex.c", line 330: warning: argument mismatch
"obex.c", line 344: warning: improper pointer/integer combination: op "="
"obex.c", line 416: warning: argument mismatch
"obex.c", line 430: warning: argument mismatch
"obex.c", line 449: warning: argument mismatch
"obex.c", line 466: warning: argument mismatch
"obex.c", line 508: warning: argument mismatch
"obex.c", line 511: warning: argument mismatch
"obex.c", line 775: warning: argument mismatch
"obex.c", line 802: warning: argument mismatch
"obex.c", line 807: warning: argument #1 is incompatible with prototype:
prototype: pointer to const char : "/usr/include/iso/string_iso.h", line 70
argument : pointer to const unsigned char
"obex.c", line 829: warning: argument mismatch
"obex.c", line 843: warning: argument mismatch
"obex.c", line 892: warning: argument mismatch
"obex.c", line 911: warning: argument mismatch
"obex.c", line 914: warning: argument mismatch
"obex.c", line 936: warning: argument mismatch
"obex.c", line 958: warning: argument mismatch
"obex.c", line 961: warning: argument mismatch
"obex.c", line 987: warning: argument mismatch
"obex.c", line 1010: warning: argument mismatch
"obex.c", line 1013: warning: argument mismatch
"obex.c", line 1040: warning: argument mismatch
"obex.c", line 1043: warning: argument mismatch
cc: acomp failed for obex.c
gmake[2]: *** [obex.lo] Error 1
gmake[2]: Leaving directory `/pkgobj/comms/openobex/work/openobex-1.0.1/src'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/pkgobj/comms/openobex/work/openobex-1.0.1'
gmake: *** [all-recursive-am] Error 2
*** Error code 2
Stop.
bmake: stopped in /usr/pkgsrc/comms/openobex
===>
===> There was an error during the ``build'' phase.
===> Please investigate the following for more information:
===> * log of the build
===> * /pkgobj/comms/openobex/work/.work.log
===>
*** Error code 1
Stop.
bmake: stopped in /usr/pkgsrc/comms/openobex
Please view the work log for openobex-1.0.1nb1
BULK> openobex-1.0.1nb1 was marked as broken: -rw-r--r-- 1 root other 9029 Aug 7 13:28 .broken.html /usr/pkg/bin/bmake deinstall ===> Deinstalling for openobex BULK> Marking all packages which depend upon openobex-1.0.1nb1 as broken: BULK> marking package that requires openobex-1.0.1nb1 as broken: obexftp-0.10.3nb1 (comms/obexftp) BULK> Build for openobex-1.0.1nb1 was not successful, aborting.