
-- SECTION 1: Top Level Definitions

S5-CHASSIS-MIB DEFINITIONS ::= BEGIN

IMPORTS
        OBJECT-TYPE, MODULE-IDENTITY,
	Integer32, Counter32, Gauge32,
        TimeTicks, IpAddress
		FROM SNMPv2-SMI
	DisplayString
		FROM SNMPv2-TC
	s5Chassis
		FROM S5-ROOT-MIB
	AttId, LocChan
		FROM S5-TCS-MIB;

s5ChasMib MODULE-IDENTITY
       LAST-UPDATED    "200505110000Z"
       ORGANIZATION    "Nortel Networks"
       CONTACT-INFO    "Nortel Networks"
       DESCRIPTION
           "5000 Chassis MIB

           Copyright 1995-2004 Nortel Networks, Inc.
           All rights reserved.
           This Nortel Networks SNMP Management Information Base Specification
           (Specification) embodies Nortel Networks' confidential and
           proprietary intellectual property. Nortel Networks retains all
           title and ownership in the Specification, including any
           revisions.

           This Specification is supplied 'AS IS', and Nortel Networks makes
           no warranty, either express or implied, as to the use,
           operation, condition, or performance of the Specification."

     REVISION "200505110000Z" -- May 11, 2005
     DESCRIPTION "Version 140:  Fix support for USB flash dongles."

     REVISION "200505050000Z" -- May 5, 2005
     DESCRIPTION "Version 139:  Fleshed out support for USB flash dongles."

     REVISION "200410290000Z" -- October 29, 2004
     DESCRIPTION "Version 138:  Added baystack15 rpsu type."

     REVISION "200407200000Z" -- July 20, 2004
     DESCRIPTION "Version 137:  Added version info."

     ::= { s5Chassis 10 }


-- Chassis Groups


s5ChasGen       OBJECT IDENTIFIER ::= { s5Chassis 1 }
s5ChasGrp       OBJECT IDENTIFIER ::= { s5Chassis 2 }
s5ChasCom       OBJECT IDENTIFIER ::= { s5Chassis 3 }
s5ChasBrd       OBJECT IDENTIFIER ::= { s5Chassis 4 }
s5ChasStore     OBJECT IDENTIFIER ::= { s5Chassis 5 }
s5ChasSm        OBJECT IDENTIFIER ::= { s5Chassis 6 }
s5ChasTmpSnr    OBJECT IDENTIFIER ::= { s5Chassis 7 }
s5ChasUtil      OBJECT IDENTIFIER ::= { s5Chassis 8 }
s5ChasPs        OBJECT IDENTIFIER ::= { s5Chassis 9 }

-- SECTION 2: MIB Objects


-- General Chassis Information


s5ChasType OBJECT-TYPE
	SYNTAX	OBJECT IDENTIFIER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The chassis type. This is 'what kind of
		box' is being managed. The values are
		defined under s5ChasTypeVal in the
		Registration MIB."
	::= { s5ChasGen 1 }

s5ChasDescr OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..64))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"A description of the chassis.
		The value is a zero length string
		if no information is available."
	::= { s5ChasGen 2 }

s5ChasLocation OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..64))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The physical location of the chassis
		(e.g., 'fourth floor wiring closet in
		building A'). The value is a zero
		length string if no information
		is available.  Note: this object is
		different from sysLocation in MIB-II.
		However, an agent may use this value for
		sysLocation if none is configured in the
		the agent."
	::= { s5ChasGen 3 }

s5ChasContact OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..64))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The textual identification of the
		contact person for the chassis, together
		with information on how to contact
		this person. The value is a zero length
		string if no information is available.
		Note: this object is different from sysContact
		in MIB-II. However, an agent may use this value
		for sysContact if none is configured in the
		agent."
	::= { s5ChasGen 4 }

s5ChasVer OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The version of the chassis in the form
		'major.minor.maintenance[letters]'. If the
		version is unknown or not available then
		the value should be a zero length string."
	::= { s5ChasGen 5 }

s5ChasSerNum OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The serial number of the chassis. If the
		serial number is unknown or unavailable then
		the value should be a zero length string."
	::= { s5ChasGen 6 }

s5ChasGblPhysChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of physical changes (i.e.,
		an addition or removal of a component or
		sub-component) that have been detected in the
		chassis since cold/warm start of the agent."
	::= { s5ChasGen 7 }

s5ChasGblPhysLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime when the last
		physical change (i.e., addition or
		removal of a module or sub-module) was
		detected in the chassis. If none have
		been detected since cold/warm start of
		the agent, then the value is zero."
	::= { s5ChasGen 8 }

s5ChasGblAttChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of attachment changes
		across all boards in the chassis that have
		been detected since cold/warm start of
		the agent."
	::= { s5ChasGen 9 }

s5ChasGblAttLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime when the last
		attachment change on any board in the chassis
		was detected. If none have been detected
		since cold/warm start of the agent, then the
		value is zero."
	::= { s5ChasGen 10 }

s5ChasGblConfChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of configuration changes
		(other than attachment changes, or physical
		additions or removals) across all boards in
		the chassis that have been detected since
		cold/warm start of the agent."
	::= { s5ChasGen 11 }

s5ChasGblConfLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime when the last
		configuration change (other than attachment
		changes, or physical additions or removals)
		on any board in the chassis was detected.
		If none have been detected since cold/warm
		start of the agent, then the value is zero."
	::= { s5ChasGen 12 }

-- Chassis Group Table


s5ChasGrpTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5ChasGrpEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table that contains information about
		each group that can contain chassis
		components."
	::= { s5ChasGrp 1 }

s5ChasGrpEntry OBJECT-TYPE
	SYNTAX	S5ChasGrpEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the group table.
		Rows can not be created or deleted via
		SNMP requests. The number of entries
		is determined by the physical construction
		of the chassis."
	INDEX	{ s5ChasGrpIndx }
	::= { s5ChasGrpTable 1 }

S5ChasGrpEntry ::= SEQUENCE {
	s5ChasGrpIndx         Integer32,
	s5ChasGrpType         OBJECT IDENTIFIER,
	s5ChasGrpDescr        DisplayString,
	s5ChasGrpMaxEnts      Integer32,
	s5ChasGrpNumEnts      Integer32,
	s5ChasGrpPhysChngs    Counter32,
	s5ChasGrpPhysLstChng  TimeTicks,
	s5ChasGrpEncodeFactor Integer32
	}

s5ChasGrpIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the group."
	::= { s5ChasGrpEntry 1 }

s5ChasGrpType OBJECT-TYPE
	SYNTAX	OBJECT IDENTIFIER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The type of the group. The group type
		determines the types of items that can
		be plugged into the positions in the
		group. The groups are defined under
		s5ChasGrpTypeVal in the Registration MIB."
	::= { s5ChasGrpEntry 2 }

s5ChasGrpDescr OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The description of the group. If not
		available, the value is a zero length
		string."
	::= { s5ChasGrpEntry 3 }

s5ChasGrpMaxEnts OBJECT-TYPE
	SYNTAX	Integer32 (-1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The maximum number of entries
		in the group. If not available, a
		value of -1 is returned."
	::= { s5ChasGrpEntry 4 }

s5ChasGrpNumEnts OBJECT-TYPE
	SYNTAX	Integer32 (-1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The current number of entries
		in the group. If not available,
		a value of -1 is returned."
	::= { s5ChasGrpEntry 5 }

s5ChasGrpPhysChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of physical changes (i.e.,
		an addition or removal of a component or
		sub-component) that have been detected in
		the group since cold/warm start of the agent."
	::= { s5ChasGrpEntry 6 }

s5ChasGrpPhysLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime that the last
		physical change (i.e., addition or
		removal of a module or sub-module) was
		detected in the group. If none have been
		detected since cold/warm start of the
		agent, then the value is zero."
	::= { s5ChasGrpEntry 7 }

s5ChasGrpEncodeFactor OBJECT-TYPE
	SYNTAX	Integer32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The multiplication factor used in encoding
		the component index of a component in the group.
		The component index for any group should be
		determined in conjunction with this object for
		that group.  A value of 1 indicates 'no encoding'.

		Stackable platforms:
		  The component index is encoded using the
		  following formula:
		    Component Index =
		       (Unit# * s5ChasGrpEncodeFactor) + Module#

		  Where:  Unit# is obtained from s5ChasComIndx
		          for the Unit Group, and Module# is the
		          module number in a unit starting from 1
		          and increases in a left-to-right and
		          bottom-to-top fashion.
      
		NonStackable platforms:
		  These NMMs like 5310, 5510 will always return a
		  value of 1 for this object.  Encoding/decoding
		  should not be performed in this case."
		::= { s5ChasGrpEntry 8 }

-- Component (and sub-component) Table


s5ChasComTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5ChasComEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table that contains information
		about each chassis level component
		and sub-component."
	::= { s5ChasCom 1 }

s5ChasComEntry OBJECT-TYPE
	SYNTAX	S5ChasComEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the component/sub-component
		table. Rows can not be created or
		deleted via SNMP requests. Entries are
		created and deleted when components or
		sub-components are inserted or removed
		from the chassis."
	INDEX	{ s5ChasComGrpIndx,
		  s5ChasComIndx,
		  s5ChasComSubIndx }
	::= { s5ChasComTable 1 }

S5ChasComEntry ::= SEQUENCE {
	s5ChasComGrpIndx         Integer32,
	s5ChasComIndx            Integer32,
	s5ChasComSubIndx         Integer32,

	s5ChasComType            OBJECT IDENTIFIER,
	s5ChasComDescr           DisplayString,
	s5ChasComVer             DisplayString,
	s5ChasComSerNum          DisplayString,
	s5ChasComLstChng         TimeTicks,

	s5ChasComAdminState      INTEGER,
	s5ChasComOperState       INTEGER,

	s5ChasComMaxSubs         Integer32,
	s5ChasComNumSubs         Integer32,

	s5ChasComRelPos          Integer32,
	s5ChasComLocation        DisplayString,
	s5ChasComGroupMap        Integer32,

        s5ChasComBaseNumPorts    Integer32,
        s5ChasComTotalNumPorts   Integer32,

        s5ChasComIpAddress       IpAddress
	}

s5ChasComGrpIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the chassis level group which
		contains this component."
	::= { s5ChasComEntry 1 }

s5ChasComIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the component in the group.
		For example, for modules in the 'board'
		group, this is the slot number."
	::= { s5ChasComEntry 2 }

s5ChasComSubIndx OBJECT-TYPE
	SYNTAX	Integer32 (0..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"If this table entry (i.e. table row)
		describes a component, then the value is
		zero. Otherwise, this table entry describes
		a sub-component and this is the index of
		the sub-component."
	::= { s5ChasComEntry 3 }

s5ChasComType OBJECT-TYPE
	SYNTAX	OBJECT IDENTIFIER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The type of component/sub-component. The
		values are defined under s5ChasComTypeVal
		in the Registration MIB."
	::= { s5ChasComEntry 4 }

s5ChasComDescr OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..64))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"A description of the component/sub-component.
		If not available, the value is a zero length
		string."
	::= { s5ChasComEntry 5 }

s5ChasComVer OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The version number of the component/sub-component.
		If not available, the value is a zero length
		string."
	::= { s5ChasComEntry 6 }

s5ChasComSerNum OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The serial number of the component/sub-component.
		If not available, the value is a zero length
		string."
	::= { s5ChasComEntry 7 }

s5ChasComLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime when it was
		detected that the component/sub-component
		was added to the chassis. If this has not
		occurred since the cold/warm start of the
		agent, then the value is zero."
	::= { s5ChasComEntry 8 }

s5ChasComAdminState OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		notAvail(2),
		disable(3),
		enable(4),
		reset(5),
		test(6)
		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The desired state of the component/sub-component.
		The values that are read-only are:
		  other(1)......currently in some other state
		  notAvail(2)...actual value is not available

		The possible values that can be read and
		written are:
		  disable(3)...disable operation
		  enable(4)....enable operation
		  reset(5).....reset component
		  test(6)......start self test of component, with
		                 the result to be normal(5),
		                 warning(8), nonFatalErr(9),
		                 or fatalErr(10) in object
		                 s5ChasComOperState
		The allowable (and meaningful) values
		are determined by the component type."
	::= { s5ChasComEntry 9 }

s5ChasComOperState OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		notAvail(2),
		removed(3),
		disabled(4),
		normal(5),
		resetInProg(6),
		testing(7),
		warning(8),
		nonFatalErr(9),
                fatalErr(10),
		notConfig(11),
		obsoleted(12)
		}
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The current operational state of the
		component. The possible values are:
		  other(1).........some other state
		  notAvail(2)......state not available
		  removed(3).......component removed
		  disabled(4)......operation disabled
		  normal(5)........normal operation
		  resetInProg(6)...reset in progress
		  testing(7).......doing a self test
		  warning(8).......operating at warning level
		  nonFatalErr(9)...operating at error level
		  fatalErr(10).....error stopped operation
                  notConfig(11)....module needs to be configured
		  obsoleted(12)...module is obsoleted but in the chassis
		The allowable (and meaningful) values
		are determined by the component type."
	::= { s5ChasComEntry 10 }

s5ChasComMaxSubs OBJECT-TYPE
	SYNTAX	Integer32 (-1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The potential number of sub-components
		that can be attached to the component.
		A value of zero means none. A value of -1
		indicates that no component information is
		available. The actual number of
		installed sub-components is found in
		s5ChasComNumSubs.
		If this entry is a sub-component, then
		this object has a value of zero."
	::= { s5ChasComEntry 11 }

s5ChasComNumSubs OBJECT-TYPE
	SYNTAX	Integer32 (-1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The actual number of sub-components that
		are attached to the component. A value of
		zero means none. A value of -1 indicates
		that no component information is available.
		The potential number of sub-components
		that can be installed is found in
		s5ChasComMaxSubs.
		If this entry is a sub-component, then
		this object has the value of zero."
	::= { s5ChasComEntry 12 }

s5ChasComRelPos OBJECT-TYPE
	SYNTAX	Integer32 (0..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This object describes the position of
		each component in the unit group relative
		to each other.  Components in the unit group
		are numbered in the ascending order with the
		uppermost component being numbered one.  The
		value of this object should never be greater
		than the value of s5ChasGrpMaxEnts.  If not
		available, a value of zero will be returned.

		Note:  This object is only implemented in
		       agents that support 'virtual' chassis."
	::= { s5ChasComEntry 13 }

s5ChasComLocation OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"This object provides geographic location
		information of a component in a system
		modeled as a chassis, but possibly physically
		implemented with geographically separate devices
		connected together to exchange managment information.
		Chassis' modeled in this manner are sometimes refered
		to as 'virtual chassis'.  An example value is:
		      '4th flr wiring closet in blg A'.

		Notes:  1.)  This object is applicable only to
		             components that can be found in either
		             the Board or Unit groups.  If the
		             information is unavailable (i.e., not
		             modeling a virtual chassis or component
		             is not in Board or Unit group), the value
		             is a zero length string.
		        2.)  If this object is applicable and is not
		             assigned a value via a SNMP SET PDU when
		             the row  is created, the value will default
		             to the value of the object s5ChasComSerNum."
	::= { s5ChasComEntry 14 }

s5ChasComGroupMap OBJECT-TYPE
	SYNTAX	Integer32 (0..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This object describes the group mapping of
		each component in the chassis.  For the
		components in the unit group, the value of this
		object should be the backplane number to which the
		unit is connected.  The value of this object should
		never be greater than the value of s5ChasGrpMaxEnts.
		If not available, a value of zero should be returned."
	::= { s5ChasComEntry 15 }

s5ChasComBaseNumPorts OBJECT-TYPE
	SYNTAX	Integer32 (0..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This object indicates the number of ports (of any type)
             contained in a component, not including any sub-components
             contained within the component."
	::= { s5ChasComEntry 16 }

s5ChasComTotalNumPorts OBJECT-TYPE
	SYNTAX	Integer32 (0..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This object indicates the total number of ports (of
             any type) contained in a component, including any ports
             contained in sub-components contained within the component."
	::= { s5ChasComEntry 17 }

s5ChasComIpAddress OBJECT-TYPE
	SYNTAX	IpAddress
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The IP address of a component.  For components that do not
             have an IP address/stack, this value should always be 0.0.0.0.
             Note that for a stackable system in stack mode, this will be
             the standalone IP address for individual units in the stack."
	::= { s5ChasComEntry 18 }



-- Board Table

s5ChasBrdTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5ChasBrdEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table containing information about each
		board that can be inserted into a slot.
		These include boards such as Repeater Modules
		and Network Management Modules."
	::= { s5ChasBrd 1 }

s5ChasBrdEntry OBJECT-TYPE
	SYNTAX	S5ChasBrdEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the board table. Entries can not
		be created or deleted via SNMP. Entries are
		created and deleted when boards are inserted
		or removed from slots in the chassis."
	INDEX	{ s5ChasBrdIndx }
	::= { s5ChasBrdTable 1 }

S5ChasBrdEntry ::= SEQUENCE {
	s5ChasBrdIndx        Integer32,
	s5ChasBrdLeds        OCTET STRING,
	s5ChasBrdNumAtt      Integer32,
	s5ChasBrdAttChngs    Counter32,
	s5ChasBrdAttLstChng  TimeTicks,
	s5ChasBrdStatusDsply DisplayString,
	s5ChasBrdDateCode    DisplayString,
	s5ChasBrdCfgSrc      INTEGER,
	s5ChasBrdCfgChngs    Counter32
	}

s5ChasBrdIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the board. This corresponds to
		the index of the slot containing the board."
	::= { s5ChasBrdEntry 1 }

s5ChasBrdLeds OBJECT-TYPE
	SYNTAX	OCTET STRING
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"A bit array that contains the value of the
		front panel LEDs and the annunciator. This is
		a packed bit string; each LED is encoded into
		4 bits (a nibble). The first nibble is stored
		in the high order bits of the first octet. The
		second nibble is stored in the low order bits
		the first octet, etc. However, the current
		mapping is that the first three nibbles are
		reserved, the fourth nibble has the value of
		the 'annunciator', and the 'normal' LEDs start
		with the fifth nibble. If the LED values are not
		available, a zero length string is returned. The
		following shows the meaning of each bit (bit 0 is
		the least significant bit) when it has a value
		of one:

		  bit  meaning
		  ---  -------
		   0   green light
		   1   yellow light
		   2   blinking
		   3   reserved"
	::= { s5ChasBrdEntry 2 }

s5ChasBrdNumAtt OBJECT-TYPE
	SYNTAX	Integer32 (0..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of backplane network
		attachment points on the board.
		This may vary based on the mode of the
		board for FDDI."
	::= { s5ChasBrdEntry 3 }

s5ChasBrdAttChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of attachment changes
		for the board that have been detected since
		cold/warm start of the agent or since
		the board was inserted."
	::= { s5ChasBrdEntry 4 }

s5ChasBrdAttLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime when the last
		attachment change on the board
		has detected. If none have been detected
		since cold/warm start of the agent, then
		the value is zero."
	::= { s5ChasBrdEntry 5 }

s5ChasBrdStatusDsply OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..48))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The current ASCII character display of
		the board. The length returned should
		match the length of the display.
		Boards with multiple displays should
		return the values concatenated together.
		Boards with no display hardware should
		return a zero length string."
	::= { s5ChasBrdEntry 6 }

s5ChasBrdDateCode OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..8))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The date of manufacture of the board
		in ASCII in the format: YYYYmmdd. For
		example, the value for April 13, 1993
		is 19930413. If not available, the
		value is a zero-length string."
	::= { s5ChasBrdEntry 7 }

s5ChasBrdCfgSrc OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		dfltJmpr(2),
		prmMem(3),
		brdCfg(4),
		sm(5),
		smDfltJmpr(6),
		smPrmMem(7),
		smBrdCfg(8)
		}
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The source of the configuration
		at the last board reset. The values
		are:
		  other(1)........unknown or some other value
		  dfltJmpr(2).....default jumpers
		  prmMem(3).......permanent memory on board
		  brdCfg(4).......saved configuration on board
		  sm(5)...........supervisor
		  smDfltJmpr(6)...SM and default jumpers
		  smPrmMem(7).....SM and permanent memory on board
		  smBrdCfg(8).....SM and saved configuration on board"
	::= { s5ChasBrdEntry 8 }

s5ChasBrdCfgChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of configuration
		changes for the board that have been
		detected since cold/warm start of the
		agent or since the board was inserted."
	::= { s5ChasBrdEntry 9 }

-- Attachment Point Table


s5ChasAttTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5ChasAttEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table containing information about each
		backplane attachment point on a board.
		The number of entries for a board is the
		value of s5ChasBrdNumAtt."
	::= { s5ChasBrd 2 }

s5ChasAttEntry OBJECT-TYPE
	SYNTAX	S5ChasAttEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the attachment point table.
		Entries can not be created or deleted
		via SNMP. Entries are created and deleted
		when boards are inserted or removed from
		slots in the chassis, or the number of
		attachment points is changed."
	INDEX	{ s5ChasAttBrdIndx,
		  s5ChasAttIndx }
	::= { s5ChasAttTable 1 }

S5ChasAttEntry ::= SEQUENCE {
	s5ChasAttBrdIndx               Integer32,
	s5ChasAttIndx                  Integer32,
	s5ChasAttDfltAtt               AttId,
	s5ChasAttCurAtt                AttId,
	s5ChasAttChngs                 Counter32,
	s5ChasAttLstChng               TimeTicks,
	s5ChasAttClusterConnCapability OCTET STRING
	}

s5ChasAttBrdIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the board. This corresponds to
		the index of the slot containing the board."
	::= { s5ChasAttEntry 1 }

s5ChasAttIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the attachment point on
		the board."
	::= { s5ChasAttEntry 2 }

s5ChasAttDfltAtt OBJECT-TYPE
	SYNTAX	AttId
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The default setting for the attachment
		point. An attachment point may be attached
		to a local channel, not attached to any
		backplane network, or attached to a media
		specific backplane network. (The valid choices
		depend on each specific attachment point.)
		NOTE: This value will always be valid
		and may change when the backplane divider
		switch setting is changed."
	::= { s5ChasAttEntry 3 }

s5ChasAttCurAtt OBJECT-TYPE
	SYNTAX	AttId
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The current setting for the attachment
		point. The slot position of the board,
		the setting of the backplane divider switch(es),
		and the mode setting affect which backplane
		networks are valid values. Also, some boards
		may put limitations on which backplane
		network(s) or local channel(s) may be used."
	::= { s5ChasAttEntry 4 }

s5ChasAttChngs OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The total number of attachment changes
		for the attachment point that have been
		detected since cold/warm start of the agent."
	::= { s5ChasAttEntry 5 }

s5ChasAttLstChng OBJECT-TYPE
	SYNTAX	TimeTicks
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The value of sysUpTime when the last
		attachment change for the attachment
		point was detected. If none have been
		detected since cold/warm start of the
		agent, then the value is zero."
	::= { s5ChasAttEntry 6 }

s5ChasAttClusterConnCapability OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(8))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"A bit array that contains the bit map
		representing all available backplane
		segment and local segment connections for
		the cluster.  One bit is also reserved to
		indicate if the cluster has an isolate
		capability.

		The first 31 bits of the array represent
		the backplane numbers, starting from the
		lower order bit. Bit 32 indicates whether
		the Cluster has a null connection capability.
		The bits in the fifth and sixth octets,
		starting with bits in the lower order octet,
		represent local segments that the cluster
		can connect to.

		A bit with a value of 1 means that the
		cluster is capable of  connecting to the
		corresponding backplane segment, local segment
		or null segment."
	::= { s5ChasAttEntry 7 }

-- Local Channel Table


s5ChasLocChanTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5ChasLocChanEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table containing information about each
		'dual mode' local channel on a board."
	::= { s5ChasBrd 3 }

s5ChasLocChanEntry OBJECT-TYPE
	SYNTAX	S5ChasLocChanEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the local channel table.
		Entries can not be created or deleted
		via SNMP. Entries are added or removed
		by adding or removing a board that has
		a 'dual mode' local channel from a slot
		in the chassis."
	INDEX	{ s5ChasLocChanBrdIndx,
		  s5ChasLocChanIndx }
	::= { s5ChasLocChanTable 1 }

S5ChasLocChanEntry ::= SEQUENCE {
	s5ChasLocChanBrdIndx  Integer32,
	s5ChasLocChanIndx     LocChan,
	s5ChasLocChanBkplMode INTEGER
	}

s5ChasLocChanBrdIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the board. This corresponds to
		the index of the slot containing the board."
	::= { s5ChasLocChanEntry 1 }

s5ChasLocChanIndx OBJECT-TYPE
	SYNTAX	LocChan
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the local channel."
	::= { s5ChasLocChanEntry 2 }

s5ChasLocChanBkplMode OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		connected(2),
		notConnected(3)
		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Indicates the attachment/isolation
		mode of a local channel to a backplane
		channel. The values that are read/write are:
		  connected(2)......connect local chan N to bkpl N
		  notConnected(3)...disconnect local chan N from bkpl

		The possible values that can be read are:
		  other(1)..........unknown
		  connected(2)......local chan N connected to bkpl N
		  notConnected(3)...local chan N isolated from bkpl N"
	::= { s5ChasLocChanEntry 3 }

-- Storage Area Table


s5ChasStoreTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5ChasStoreEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table listing the storage areas
		on each component/sub-component in
		the chassis. The number is determined
		by the components in the chassis
		which have manageable storage areas.
		Examples of storage areas include
		RAM(main memory), FLASH, ROM,
		EEPROM, etc. This does not include
		disk drives."
	::= { s5ChasStore 1 }

s5ChasStoreEntry OBJECT-TYPE
	SYNTAX	S5ChasStoreEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the table of storage areas.
		The entries can not be created or
		deleted via SNMP requests. Only those
		components/sub-components that have
		storage areas that are installed are
		present. Storage areas that are on
		components have a sub-component
		index value of zero. Storage areas that
		are on sub-components have a non-zero
		sub-component index value."
	INDEX	{ s5ChasStoreGrpIndx,
		  s5ChasStoreComIndx,
		  s5ChasStoreSubIndx,
		  s5ChasStoreIndx }
	::= { s5ChasStoreTable 1 }

S5ChasStoreEntry ::= SEQUENCE {
	s5ChasStoreGrpIndx  Integer32,
	s5ChasStoreComIndx  Integer32,
	s5ChasStoreSubIndx  Integer32,
	s5ChasStoreIndx     Integer32,

	s5ChasStoreType     OBJECT IDENTIFIER,
	s5ChasStoreCurSize  Integer32,
	s5ChasStoreCntntVer DisplayString,
	s5ChasStoreFilename DisplayString
	}

s5ChasStoreGrpIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the chassis level group
		which contains the component or
		sub-component containing the storage
		area."
	::= { s5ChasStoreEntry 1 }

s5ChasStoreComIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the component or
		the component which contains the
		sub-component containing the
		storage area."
	::= { s5ChasStoreEntry 2 }

s5ChasStoreSubIndx OBJECT-TYPE
	SYNTAX	Integer32 (0..32767)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"If the storage area is on a component,
		then the value zero. Otherwise, the
		storage area is on a sub-component and
		this is the index of the sub-component."
	::= { s5ChasStoreEntry 3 }

s5ChasStoreIndx OBJECT-TYPE
	SYNTAX	Integer32 (1..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index of the storage area on the
		component or sub-component."
	::= { s5ChasStoreEntry 4 }

s5ChasStoreType OBJECT-TYPE
	SYNTAX	OBJECT IDENTIFIER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The storage area type on the containing
		component/sub-component. The values
		are defined under the .0 branch of the
		value of s5ChasComType for the
		component/sub-component containing the
		storage area in the Registration MIB."
	::= { s5ChasStoreEntry 5 }

s5ChasStoreCurSize OBJECT-TYPE
	SYNTAX	Integer32 (-1..2147483647)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The current size of the storage
		area in bytes. A value of zero
		means the storage area is not installed
		or not usable. A value of -1 indicates
		that the size is unknown (or unavailable)."
	::= { s5ChasStoreEntry 6 }

s5ChasStoreCntntVer OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..255))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The version of the contents (i.e., the
		code or data) of the storage area in the
		form 'major.minor.maintenance[letters]'.
		If not known or not available, then the value
		is a zero length string. If multiple
		contents are stored in this container, the
		the value will contain multiple sub-versions,
		each separated by a semicolon (;)."
	::= { s5ChasStoreEntry 7 }

s5ChasStoreFilename OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..128))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
            "Name of the image file to be downloaded or
             uploaded when the s5AgInfoFileAction object
             is set to upload or download an image.  When the
             object is not used, the value is a zero-length
             string."
	::= { s5ChasStoreEntry 8 }

-- Supervisor Information


s5ChasSmLeds OBJECT-TYPE
	SYNTAX	OCTET STRING
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"A bit array that contains the value of the
		supervisor LEDs. (The format of these are the
		same as the format for object s5ChasBrdLeds.)
		If not available, a zero length string is
		returned."
	::= { s5ChasSm 1 }

s5ChasSmDateCode OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..8))
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The date of manufacture of the SM module
		in ASCII in the format: YYYYmmdd. For
		example, the value for April 13, 1993
		is 19930413. If not available, a zero
		length string is returned"
	::= { s5ChasSm 2 }

-- Temperature Sensor Table


s5ChasTmpSnrTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF S5ChasTmpSnrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains temperature
                sensor values."
        ::= { s5ChasTmpSnr 1 }

s5ChasTmpSnrEntry OBJECT-TYPE
        SYNTAX  S5ChasTmpSnrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A row in the s5ChasTmpSnrTable.  Rows
                in this table will exist for each existing
                row in the s5ChasComTable which represents
                a temperature sensor.  The values of the
                indices of the row in this table will be
                equal to those of the corresponding row in
                the s5ChasComTable."
        INDEX   { s5ChasTmpSnrGrpIndx,
                  s5ChasTmpSnrIndx,
                  s5ChasTmpSnrSubIndx }
        ::= { s5ChasTmpSnrTable 1 }

S5ChasTmpSnrEntry ::= SEQUENCE {
        s5ChasTmpSnrGrpIndx  Integer32,
        s5ChasTmpSnrIndx     Integer32,
        s5ChasTmpSnrSubIndx  Integer32,
        s5ChasTmpSnrValue    Gauge32,
        s5ChasTmpSnrTmpValue Integer32
        }

s5ChasTmpSnrGrpIndx OBJECT-TYPE
        SYNTAX  Integer32 (1..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The index of the chassis level group which
                contains this component, corresponds to
                s5ChasComGrpIndx."
        ::= { s5ChasTmpSnrEntry 1 }

s5ChasTmpSnrIndx OBJECT-TYPE
        SYNTAX  Integer32 (1..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The index of the component in the group.
                Corresponds to s5ChasComIndx."
        ::= { s5ChasTmpSnrEntry 2 }

s5ChasTmpSnrSubIndx OBJECT-TYPE
        SYNTAX  Integer32 (0..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "Sub-component index.  Corresponds to
                s5ChasComSubIndx."
        ::= { s5ChasTmpSnrEntry 3 }

s5ChasTmpSnrValue OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
                "The current temperature value of the temperature
                sensor.  This is measured in units of a half degree
                centigrade, e.g. a value of 121 indicates a temperature
                of 60.5 degrees C.

                This object is deprecated because it cannot represent
                temperature values below 0, as Gauge32 is an unsigned type."
        ::= { s5ChasTmpSnrEntry 4 }

s5ChasTmpSnrTmpValue OBJECT-TYPE
        SYNTAX  Integer32 (-32768..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The current temperature value of the temperature
                sensor.  This is measured in units of a half degree
                centigrade, e.g. a value of 121 indicates a temperature
                of 60.5 degrees C."
        ::= { s5ChasTmpSnrEntry 5 }




-- Chassis Utilization Table, includes CPU and Memory Utilization information


s5ChasUtilTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF S5ChasUtilEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains CPU and memory utilization
                information."
        ::= { s5ChasUtil 1 }

s5ChasUtilEntry OBJECT-TYPE
        SYNTAX  S5ChasUtilEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A row in the s5ChasUtilTable.  Rows
                in this table will exist for each existing
                row in the s5ChasComTable which represents
                any chassis component for which CPU and/or
                memory utilization values are available.
                The values of the indices of a row in this
                table will be equal to those of the
                corresponding row in the s5ChasComTable."
        INDEX   { s5ChasUtilGrpIndx,
                  s5ChasUtilIndx,
                  s5ChasUtilSubIndx }
        ::= { s5ChasUtilTable 1 }

S5ChasUtilEntry ::= SEQUENCE {
        s5ChasUtilGrpIndx               Integer32,
        s5ChasUtilIndx                  Integer32,
        s5ChasUtilSubIndx               Integer32,
        s5ChasUtilTotalCPUUsage         Gauge32,
        s5ChasUtilCPUUsageLast1Minute   Gauge32,
        s5ChasUtilCPUUsageLast10Minutes Gauge32,
        s5ChasUtilCPUUsageLast1Hour     Gauge32,
        s5ChasUtilCPUUsageLast24Hours   Gauge32,
        s5ChasUtilMemoryAvailable       Gauge32,
        s5ChasUtilMemoryMinAvailable    Gauge32,
        s5ChasUtilCPUUsageLast10Seconds Gauge32
        }

s5ChasUtilGrpIndx OBJECT-TYPE
        SYNTAX  Integer32 (1..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The index of the chassis level group which
                contains this component, corresponds to
                s5ChasComGrpIndx."
        ::= { s5ChasUtilEntry 1 }

s5ChasUtilIndx OBJECT-TYPE
        SYNTAX  Integer32 (1..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The index of the component in the group.
                Corresponds to s5ChasComIndx."
        ::= { s5ChasUtilEntry 2 }

s5ChasUtilSubIndx OBJECT-TYPE
        SYNTAX  Integer32 (0..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "Sub-component index.  Corresponds to
                s5ChasComSubIndx."
        ::= { s5ChasUtilEntry 3 }

s5ChasUtilTotalCPUUsage OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of time the CPU has been
         busy since system initialization."
    ::= {s5ChasUtilEntry 4}

s5ChasUtilCPUUsageLast1Minute OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of time the CPU has been
         busy over the last 1 minute."
    ::= {s5ChasUtilEntry 5}

s5ChasUtilCPUUsageLast10Minutes OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of time the CPU has been
         busy over the last 10 minutes."
    ::= {s5ChasUtilEntry 6}

s5ChasUtilCPUUsageLast1Hour OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of time the CPU has been
         busy over the last 1 hour."
    ::= {s5ChasUtilEntry 7}

s5ChasUtilCPUUsageLast24Hours OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of time the CPU has been
         busy over the last 24 hours."
    ::= {s5ChasUtilEntry 8}

s5ChasUtilMemoryAvailable OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of dynamic memory that
         is currently free.  This is measured as a percentage of
         the memory the was available immediately after system
         initialization."
    ::= {s5ChasUtilEntry 9}

s5ChasUtilMemoryMinAvailable OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the lowest percentage of dynamic
         memory that has been free since system initialization.
         This is a 'low-water mark' for memory utilization, and is
         essentially the lowest value of s5ChasUtilMemoryUsage
         since system initialization."
    ::= {s5ChasUtilEntry 10}

s5ChasUtilCPUUsageLast10Seconds OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object returns the percentage of time the CPU has been
         busy over the last 10 seconds."
    ::= {s5ChasUtilEntry 11}





-- Chassis Power Supply Table


s5ChasPsRpsuTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF S5ChasPsRpsuEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains extended information on
                 RPSU power supply components."
        ::= { s5ChasPs 1 }

s5ChasPsRpsuEntry OBJECT-TYPE
        SYNTAX  S5ChasPsRpsuEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A row in the s5ChasPsRpsuTable.  Rows
                in this table will exist for each existing
                row in the s5ChasComTable which represents
                any RPSU power supply.  The values of the
                indices of a row in this table will be equal
                to those of the corresponding row in the
                s5ChasComTable."
        INDEX   { s5ChasPsRpsuGrpIndx,
                  s5ChasPsRpsuIndx,
                  s5ChasPsRpsuSubIndx }
        ::= { s5ChasPsRpsuTable 1 }

S5ChasPsRpsuEntry ::= SEQUENCE {
        s5ChasPsRpsuGrpIndx               Integer32,
        s5ChasPsRpsuIndx                  Integer32,
        s5ChasPsRpsuSubIndx               Integer32,
        s5ChasPsRpsuType                  INTEGER,
        s5ChasPsRpsuSourceConfig          INTEGER
        }

s5ChasPsRpsuGrpIndx OBJECT-TYPE
        SYNTAX  Integer32 (1..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The index of the chassis level group which
                contains this component, corresponds to
                s5ChasComGrpIndx."
        ::= { s5ChasPsRpsuEntry 1 }

s5ChasPsRpsuIndx OBJECT-TYPE
        SYNTAX  Integer32 (1..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The index of the component in the group.
                Corresponds to s5ChasComIndx."
        ::= { s5ChasPsRpsuEntry 2 }

s5ChasPsRpsuSubIndx OBJECT-TYPE
        SYNTAX  Integer32 (0..32767)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "Sub-component index.  Corresponds to
                s5ChasComSubIndx."
        ::= { s5ChasPsRpsuEntry 3 }

s5ChasPsRpsuType OBJECT-TYPE
        SYNTAX  INTEGER {
                            bayStack10(1),
                            nes(2),
                            bayStack15(3)
                        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                "This object returns the specific type of RPSU.
                 It can be set to indicate to the system the type
                 of installed RPSU in cases where the RPSU type
                 cannot be automatically detected."
    ::= {s5ChasPsRpsuEntry 4}

s5ChasPsRpsuSourceConfig OBJECT-TYPE
        SYNTAX  INTEGER {
                            ups(1),
                            rpsu(2),
                            powerSharing(3)
                        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                "This object is used to specify how a particular
                 RPSU should be used by the system, as follows:

                    ups(1)
                       Indicates that the RPSU should be used only as
                       an uninterruptible power source for devices
                       attached to powered ethernet ports.

                    rpsu(2)
                       Indicates that the RPSU should be used only as
                       a source of backup power for the device itself.

                    powerSharing(3)
                       Indicates that the RPSU should be used both as
                       a source of backup power for the device, and as
                       a UPS for devices attached to powered ethernet
                       ports."
    ::= {s5ChasPsRpsuEntry 5}

END
